Free models · Game-ready GLB
Weapons tools
Every medieval weapons tool below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole weapons tools set from the packs.
93 free GLB models
Planishing stake in a block, 0.84 m (Blacksmith Forge and Armoury)
Polished steel planishing stake on a T head set in an oak block, with a bench mandrel beside it and a curved plate laid over the head, the tool that takes the hammer marks out of raised armour.
Armourer's dishing stump, 0.78 m (Blacksmith Forge and Armoury)
Elm stump hollowed with three dishing bowls of different depths, a half finished plate lying in the largest and the raising and dishing mallets standing in the ring beside it.
Nail header block, 0.62 m (Blacksmith Forge and Armoury)
Nail maker's stump: a bolster plate and two headers set in an oak block with a tray of finished nails in four sizes beside it, the simplest piecework a smithy ever ran on.
Wire die rack, 0.85 m (Blacksmith Forge and Armoury)
Oak rack of hardened draw plates in falling sizes with a coil of drawn wire on each hook, the plates pierced with graded rows of holes and stamped with an abstract size mark.
Drawing block and draw bench, 1.6 m (Blacksmith Forge and Armoury)
Oak draw bench 1.6 m long for drawing rod down to size: a cast draw plate in an iron frame at one end, a windlass with a ratchet at the other, the drawn rod lying through it and a coil of finished rod on the floor.
AnimatedPolishing wheel bench, 1.1 m (Blacksmith Forge and Armoury)
Leather faced polishing wheel on an oak bench, turned by its own treadle and flywheel, with a shelf of abrasive blocks and tallow under it and a finished plate held ready against the face.
AnimatedTreadle grindstone, 1.2 m (Blacksmith Forge and Armoury)
Sandstone grinding wheel 0.7 m across turning in its water trough on an oak frame, driven by a foot treadle and a crank, with a seat board across the back for the smith who is grinding.
Wall tool board, 1.6 m (Blacksmith Forge and Armoury)
Boarded tool wall 1.6 m wide hung with the tools that are not on the bench: tongs, a set hammer, a hot cut, calipers, a square, a pair of dividers and a coil of binding wire, all on forged hooks.
File and rasp rack, 0.9 m (Blacksmith Forge and Armoury)
Wall rack 0.9 m wide of eight files and rasps hanging by their tangs: flat, half round, round and square cuts with turned wooden handles, the tools that take the hammer marks off finished work.
Hardy tools in a block, 0.5 m (Blacksmith Forge and Armoury)
Oak block 0.5 m wide standing the anvil's bottom tools upright: a hardy cutting tool, a bending fork, a bottom swage and a cone mandrel, all on square shanks with their edges dressed.
Swage and fuller set on a board, 0.8 m (Blacksmith Forge and Armoury)
Board of bottom and top tooling 0.8 m wide: three matched swage pairs, a top and bottom fuller, a flatter and a set hammer, each with a square shank that drops into the anvil's hardy hole.
Tong rack, 1.2 m (Blacksmith Forge and Armoury)
Iron tong rack 1.2 m wide on two legs holding seven pairs of tongs jaw down: flat bit, bolt, hollow bit, box and pick up jaws, the set a smith reaches for without looking.
Hammer rack, 1.1 m (Blacksmith Forge and Armoury)
Free standing oak rack 1.1 m wide carrying the striking tools in order of weight: two cross pein hammers, a ball pein, a straight pein and a sledge, each head resting on the rail with its haft hanging through.
Chisel and punch tray, 0.7 m (Blacksmith Forge and Armoury)
Oak tray 0.7 m long of hot and cold chisels, round and square punches and a slitting chisel, each one a forged bar with an upset head and a drift mark, laid in the tray the way they come off the bench.
AnimatedBench vice on a stand, 1.0 m (Blacksmith Forge and Armoury)
Heavy parallel bench vice bolted to an oak stand: a cast body with serrated steel jaw plates, a square thread screw with a sliding tommy bar and a small anvil pad cast behind the jaws.
AnimatedLeg vice on a bench post, 1.25 m (Blacksmith Forge and Armoury)
Forged leg vice: a fixed jaw strapped to an oak post with its leg carried down onto a stone pad, a moving jaw on the box screw, a hand lever through the screw head and the spring that opens it, sized for hot work.
Swage block on a stand, 0.92 m (Blacksmith Forge and Armoury)
Cast swage block 0.6 m square pierced with round, square and hexagonal holes and notched all round its edges with half round and vee swages, standing on end in an oak cradle so either face can be worked.
Stake anvil in a block, 0.66 m (Blacksmith Forge and Armoury)
Small bickern stake with a round horn one side and a square bick the other, driven into an oak block and used for the light work a great anvil is too coarse for.
Great anvil on an oak stump, 0.98 m (Blacksmith Forge and Armoury)
A 150 kg London pattern anvil on a banded oak stump: cast body with a ground steel face, a round horn, a hardy hole and a pritchel hole in the heel, staples over the feet and the smith's hammer lying on the face.
Fire irons in a stand, 1.3 m (Blacksmith Forge and Armoury)
Forged rake, poker, slice and fire shovel standing in an iron ring stand on a weighted base, the tools that work the firepot and clear the clinker out of it.
AnimatedBook Press (Medieval Monastery and Scriptorium)
Free 3D model of a medieval binder’s book press: an oak frame with two threaded wooden screws, a moving platen and a stack of sections under it, 1.02 m wide.
AnimatedParchment Stretching Frame (Medieval Monastery and Scriptorium)
Free 3D model of a medieval parchment stretching frame: an oak herse with a pegged skin, twelve pippin cords and six turning tension pegs, 1.4 m wide.
Squires Work Bench (Medieval Tournament and Jousting Ground)
Two metre armourers bench with a vice, a tool rail, a half finished breastplate and rag bundles.
AnimatedWhetstone Wheel (Medieval Tournament and Jousting Ground)
Treadle grindstone on a timber frame with a water tray under the wheel, for rebating tournament arms.