Free models · CC0
Vehicles
Every realistic vehicle below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole vehicles set from the packs.
397 free GLB models
Plastic rescue sled (Mountaineering and Summit Expedition)
Moulded rescue sled with runners, four casualty straps, a head-end bar and a tow bridle on a karabiner.
Generator trailer (UFO Crash Site and Recovery Facility)
A towable diesel generator: louvred acoustic canopy with a hinged access door, roof exhaust, control panel with lamps and outlets, A-frame drawbar, jockey wheel and a single axle.
Counterbalance forklift (UFO Crash Site and Recovery Facility)
A 3 m counterbalance forklift: bevelled body with a counterweight tail, overhead guard, seat and steering column, a two-stage mast on a hinged node and a fork carriage with two tines on its own node.
Low loader trailer (UFO Crash Site and Recovery Facility)
A drop-deck low loader 18 m long over its ramps: gooseneck with kingpin and landing legs, a deep well deck on twin side rails with twelve cross members, three rear axles on duals and two hinged loading ramps as separate nodes.
Recovery tractor unit (UFO Crash Site and Recovery Facility)
A three-axle 6x4 tractor unit for moving a low loader: bevelled cab and sleeper with a raked screen, twin exhaust stacks, mirror arms, bull bar with a light row, twin rear duals, side fuel tank, catwalk and a fifth wheel plate.
Heavy lift crane (UFO Crash Site and Recovery Facility)
A five-axle all-terrain lifting crane: ten-wheel carrier with a low cab, four extended outriggers on jack pads, a slewing house with a counterweight stack, a three-section telescopic boom raised to 48 degrees on a hinged node, a lift ram and a free-hanging hook block.
Drone probe sphere (UFO Crash Site and Recovery Facility)
A 1.5 m spherical probe on four short legs: a polished shell with an equatorial seam band, a lit ring, three sensor blisters and a forward aperture.
Drone probe sphere, deployed (UFO Crash Site and Recovery Facility)
The same probe split at its equator, showing the inner core, six radial struts and an extended sensor mast.
Bio-organic pod craft (UFO Crash Site and Recovery Facility)
A 5.7 m seamless pod craft: a smooth boxed-oval hull with a dorsal ridge, four glowing gill vents on each flank, a ventral membrane window, a nose sensor node and three organic ground nubs instead of landing gear.
Triangular craft (UFO Crash Site and Recovery Facility)
A 14 m black triangle: a rounded-corner delta planform with a hard chine, a shallow domed upper surface, raised piping panel divisions, a central ventral aperture, three recessed corner emitters on landing pads and a dorsal spine housing with a canopy strip.
Damaged scout disc (UFO Crash Site and Recovery Facility)
A 6.4 m scout disc broken open by an impact: a whole sector of the rim is torn away, the double hull skin shows its thickness at the tear, ring frames and ribs stand exposed in the gap, conduits hang loose, three skin plates are peeled back and the canopy is shattered.
Classic saucer craft, gear stowed (UFO Crash Site and Recovery Facility)
The same 12 m disc craft with its landing legs folded into the bays and the bay doors closed, resting on cradles or shown in flight.
Classic saucer craft, landed (UFO Crash Site and Recovery Facility)
A recovered 12 m disc craft standing on three deployed landing legs: a concave underside with a ventral drive iris, a machined rim band carrying sixteen lights, a panelled upper deck and a raised tinted cupola. The three landing bays are open with their doors swung down.
Towed water bowser (Arable Fields and Farm Machinery)
A small single-axle water bowser: a lofted tank with a top filler hatch on a light chassis, mudguards, hose reel, rear tap and a drawbar with a coupling eye and jack.
Agricultural telehandler (Arable Fields and Farm Machinery)
A rigid-frame agricultural telehandler: chassis with a side engine pod, narrow left-hand glazed cab, a two-stage telescopic boom on its own pivot, a carriage with pallet forks on a second pivot and lug tyres on both axles.
Tandem-axle slurry tanker (Arable Fields and Farm Machinery)
A tandem-axle vacuum tanker: a cylindrical tank with dished ends and banding rings, front vacuum pump and filler arm, sight tube, rear outlet valve with a splash plate and a drawbar.
Eight metre bale trailer (Arable Fields and Farm Machinery)
A tandem-axle flatbed bale trailer with a tall front headboard, rear rack, side lashing posts, a slatted deck, drawbar and rear lights.
Fixed chamber round baler (Arable Fields and Farm Machinery)
A trailed round baler: a fixed chamber built from two lofted halves with the rear tailgate on its own hinge pivot, a tine pick-up, net wrap box and drawbar.
Conventional square baler (Arable Fields and Farm Machinery)
A trailed square baler with an offset drawbar, flywheel and gearbox, long bale chamber, knotter deck with twine boxes, tine pick-up and a rear bale chute.
Tandem-axle grain trailer (Arable Fields and Farm Machinery)
A tandem-axle tipping grain trailer: ribbed body with sloped sides on a rear hinge, tipping ram, rear grain door, drawbar with a coupling eye and parking jack, mudguards, lights and a side ladder.
Trailed boom sprayer, folded (Arable Fields and Farm Machinery)
A trailed crop sprayer with a lofted tank, induction hopper, pump and rinse tank on a wide single axle, booms folded against the centre frame for transport.
Trailed boom sprayer, booms out (Arable Fields and Farm Machinery)
The trailed crop sprayer with its twelve metre boom unfolded and nozzle bodies spaced along the truss, ready to spray.
Self-propelled forage harvester (Arable Fields and Farm Machinery)
A self-propelled forage harvester with a wide grass pick-up front, feed rollers, glazed cab, rear engine deck and a swan-neck discharge spout swung over the left shoulder.
Header transport trailer (Arable Fields and Farm Machinery)
A long single-axle trailer for moving a combine header on the road: low frame with padded cradles, mudguards, a swivel drawbar with a coupling eye and a rear marker board.