Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,088 free GLB models
DI Box (Live Music Venue and Festival Stage)
A passive direct injection box: a cast alloy case 120 mm across with the jack and XLR on opposite ends, a ground lift and pad switch on top and a printed label panel.
Microphone on a Boom Stand (Live Music Venue and Festival Stage)
A vocal microphone on a telescopic boom stand: a cardioid dynamic with a wire grille ball in a swivel clip, on a counterweighted boom over a three leg base at singing height.
Multicore Cable Drum (Live Music Venue and Festival Stage)
A cable drum on a rolling stand: a 600 mm flanged drum wound with multicore on a folding A frame, with the stage box strapped to the frame foot.
Follow Spot on a Stand (Live Music Venue and Festival Stage)
A follow spot on a three leg stand: a 1.6 m barrel with its lamp house, douser handle and iris knob, on a tilting fork at operator height. The lens looks toward +Z.
Haze Machine (Live Music Venue and Festival Stage)
A water based hazer: a black case with the nozzle and control panel on the front and its fluid bottle stood in a cradle beside it, for the upstage corner where the beams need something to sit in.
Moving Head Light (Live Music Venue and Festival Stage)
A moving head spot: a base with a display panel, a yoke that pans on it and a head that tilts in the yoke behind a fresnel lens. About 700 mm tall at level.
Front of House Mixing Desk (Live Music Venue and Festival Stage)
A digital front of house desk on its flight case base: a 32 fader surface with a bank of rotaries and a raked screen, at standing height on a cased plinth. The operator side faces +Z.
Lighting Bar with PAR Cans (Live Music Venue and Festival Stage)
A 2 m lighting bar with four PAR cans on it: hook clamps at both ends, alternating tilts down the bar and a coloured gel frame on the front of every can, in magenta, amber, blue and green.
Stage Monitor Wedge (Live Music Venue and Festival Stage)
A 12 inch floor monitor: a 45 degree wedge on rubber runners with a perforated grille over the coaxial driver, for the line of wedges along the downstage edge.
Subwoofer Cabinet (Live Music Venue and Festival Stage)
A double 18 inch bandpass subwoofer: a 1.2 m birch enclosure on skid runners with two tuned ports through the baffle, a grille over the mouth and a recessed connector plate on the back.
Line Array Hang, Ten Boxes (Live Music Venue and Festival Stage)
A flown line array: ten boxes under a fly bar, splayed from level at the top to 34 degrees down at the bottom so the column curves the way a real hang does. About 3.6 m of array under the bar.
Line Array Ground Stack, Six Boxes (Live Music Venue and Festival Stage)
A ground stacked array: six boxes on a raked stack frame, the bottom box aimed up into the crowd and the splay closing toward the top. About 2.3 m of array on the frame.
PA Stack Frame (Live Music Venue and Festival Stage)
A wheeled stacking frame for a ground stacked PA: a welded dolly with raked bearers that tilt the bottom box up into the crowd, four braked castors and lifting points at both ends.
Line Array Speaker Cabinet (Live Music Venue and Festival Stage)
A three way line array box: a 1.05 m wedge shaped enclosure with a horn section between two cone sections behind a steel grille, rigging ears on both side walls and pin holes for the splay link.
LED Wall Panel Module (Live Music Venue and Festival Stage)
A 1 m square LED video panel: an emissive face in a cast frame with locks on both stiles and a rear rigging bar. Tile it on a 1 m grid for a backdrop wall or a side screen of any size.
Ceiling Light Bar (Bowling Alley and Pool Hall)
A 2.4 m linear light bar on two drop rods, with a glowing cyan tube in a charcoal channel. The run of them over the lanes is what gives an alley its colour.
Litter Bin (Bowling Alley and Pool Hall)
A 0.76 m open top litter bin: a charcoal drum with a magenta band and a chrome rim, with the sack liner turned over the rim the way a cleaned one is.
Bench Seating Run (Bowling Alley and Pool Hall)
A 1.8 m bench of moulded seating: a crowned and welted magenta pad on a welded frame with a tipped back rest, for the row behind an approach. Runs butt end to end.
Neon Wall Sign (Bowling Alley and Pool Hall)
The lit sign over a bowling alley counter: two pins and a ball drawn in glowing tube with speed strokes behind them, on a dark backing plate with chrome stand-offs. 1.7 m across.
Drinks Vending Machine (Bowling Alley and Pool Hall)
A 1.95 m chilled vending machine: four shelves of cans and bottles behind a framed glass door, a lit keypad and coin slot down the right pilaster and a delivery flap at the bottom. The door swings open on its left stile.
Drinks Tray with Glasses (Bowling Alley and Pool Hall)
A service tray carried back to a lane: three tumblers and a stemmed glass, each lathed up the outside and back down the inside so it has a real opening, plus a can, on a rubber lined tray.
Bar Counter Section (Bowling Alley and Pool Hall)
A 1.8 m bar counter section: a panelled timber front on a frame carcass with a brass nosing, a foot rail on two standoffs, a drip tray and a two tap keg font on the deck. Counter top at 1.06 m, the height of the bar stool.
Shoe Hire Counter with Pigeonholes (Bowling Alley and Pool Hall)
The counter a game starts at: a 2.3 m desk panelled in alternating magenta and teal with a timber top, a lit toe band, a till on a stand and a spray bottle, standing in front of a twenty hole pigeonhole rack loaded with pairs of hire shoes.
Jukebox (Bowling Alley and Pool Hall)
A bubbler jukebox: a timber cabinet with a half round lit head, chrome bands following the arch, chrome pilasters, a record stack and a labelled disc behind the glass and a sloped selection panel with lettered buttons. The glazed front lifts on its top edge to load the records.