Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,316 free GLB models
Folding Camp Table (Caravan Park and Campsite)
A 1.1 m folding camp table: a white top with a blue edge rail on crossed galvanised legs. Static geometry; the legs are modelled set up.
Folding Camping Chair, Blue (Caravan Park and Campsite)
The same folding chair in blue canvas with an orange cup holder, so a pitch is not set out in one colour. The geometry is unchanged.
Fire Pit Ring with Logs (Caravan Park and Campsite)
A 1.2 m fire pit: a ring of set stones round an ash bed with three logs stacked over the embers. The fire itself is glowing geometry rather than an effect: there are no lights, no particles and nothing animated, because flame is not a rigid body.
Folding Camping Chair (Caravan Park and Campsite)
A folding camping chair set up: a galvanised tube frame with a canvas seat, back and arm straps and a cup holder on one arm. Static geometry; the frame is modelled open, because folding it needs a jointed linkage rather than one rigid node.
Picnic Bench (Caravan Park and Campsite)
A 1.8 m timber picnic bench with the benches built onto the same A frames as the table, of the kind bolted down beside a pitch or outside a site shop. Static geometry.
Pitch Marker Post (Caravan Park and Campsite)
A 1 m timber pitch marker with a blue number plate and a pointed galvanised cap, driven in at the corner of a pitch so a warden can number the field. Static geometry.
Windbreak Bay (Caravan Park and Campsite)
One 2 m bay of a windbreak: striped cloth stretched between three timber poles, ported at both ends so any number of bays make a run round a pitch. The cloth is solid geometry and does not move, because a windbreak is only ever a sheet in the wind.
Canvas Bell Tent (Caravan Park and Campsite)
A 3.6 m canvas bell tent on a single centre pole: a low sidewall under a coned roof with a metal cap, a pegged groundsheet, a zipped doorway and eight guy lines out to their pegs. The pole, the canvas and the guys are all fixed geometry.
Family Tunnel Tent (Caravan Park and Campsite)
A 3.1 x 4.8 m family tunnel tent: three hooped bedrooms and a living end under one vault, a zipped front doorway, a rear vent panel, mud skirts down both sides and four guy lines pegged out. Everything is fixed geometry; the fabric does not move.
Caravan Porch Awning (Caravan Park and Campsite)
A 3.4 x 2.6 m porch awning for a touring caravan's near side: a pole frame, a canvas roof falling from 2.25 m at the van to 1.95 m at the front, cream panels with a window and a doorway, an orange valance and a groundsheet. The open back butts against the van. Nothing moves.
Two Person Dome Tent, Blue (Caravan Park and Campsite)
The two person dome in blue with orange poles, so a tent field is not one colour. The geometry is unchanged.
Four Person Dome Tent (Caravan Park and Campsite)
The same dome pitched one size up at 3.5 x 3.2 m, for a family pitch beside the two person tents. Same construction, same fixed fabric.
Two Person Dome Tent (Caravan Park and Campsite)
A 2.5 x 2.3 m two person dome tent pitched on its groundsheet, with crossed pole arcs over the flysheet, a dark zipped doorway and four guy lines pegged out. Nothing moves: skin, poles, guys and pegs are solid geometry, because fabric needs a deforming surface.
AnimatedYard waste bin (Tool Hire Depot and Plant Yard)
Two wheeled 1100 litre yard bin 1.4 m wide: a charcoal moulded body with an orange lid that lifts, a steel comb bar and lifting trunnions, four castors and a cream waste stream label on the front.
Oil and grease shelf (Tool Hire Depot and Plant Yard)
Bunded oil and grease shelf 1.4 m wide: a steel rack with a charcoal drip tray, two shelves of cream oil bottles, blue grease cartridges in a tray, a 20 litre drum on its stand with a tap and a funnel hooked on the frame.
Parts bin wall (Tool Hire Depot and Plant Yard)
Louvred parts bin panel 1.8 m wide and 2 m tall on a steel stand, hung with forty two open fronted bins in orange, blue and yellow holding fixings, seals and carbon brushes, with a cream index card on each row.
AnimatedTool repair bench with vice (Tool Hire Depot and Plant Yard)
Fitter's repair bench 2 m wide: a blue steel frame with a timber top, a heavy bench vice at one end, two tool drawers that slide out, a shadow board of spanners and screwdrivers, a stripped down breaker in pieces and a swan neck lamp.
PAT test bench (Tool Hire Depot and Plant Yard)
Portable appliance test bench 1.8 m wide: a steel framed bench with a cream worktop carrying a charcoal test set with a socket panel and a lead tester, a printer of pass labels, a tray of failed leads and a blue results board on the upstand.
Adjustable steel prop stack (Tool Hire Depot and Plant Yard)
Bundle of eight adjustable steel props 2.1 m long stacked on two timber bearers with a banding strap: painted blue outer tubes with cream inner tubes, pin holes, collar nuts and square end plates, the way props are stored in a hire yard.
AnimatedPetrol floor saw (Tool Hire Depot and Plant Yard)
Walk behind floor saw 1.4 m long: an orange chassis with a charcoal petrol engine, a 450 mm diamond blade under a steel guard that turns, a water tank over the blade arm, a depth handwheel and four road wheels.
Vibrating plate compactor (Tool Hire Depot and Plant Yard)
Forward plate compactor 0.8 m long: a steel base plate with turned up ends on rubber isolators, a yellow engine hood over the exciter housing, a folding charcoal handle with a throttle lever and a lifting eye.
Trench rammer (Tool Hire Depot and Plant Yard)
Upright trench rammer 1 m tall: a charcoal ramming shoe on a bellows and spring case, a yellow engine and fuel tank block, a wrap round guard frame with a rubber grip and a recoil starter.
AnimatedTowable cement mixer (Tool Hire Depot and Plant Yard)
Tip up cement mixer 1.5 m tall on a charcoal A frame with two road wheels and a jockey stand: an orange drum on its tilting yoke that turns, a charcoal electric motor and gear housing, a tipping handwheel and a cream splash guard.
Alloy scaffold tower section (Tool Hire Depot and Plant Yard)
Alloy tower frame section 1.8 m wide, 1.5 m tall and 1.2 m deep: two rung end frames in steel with blue spigots, two diagonal braces, a timber faced platform deck with a charcoal hatch surround and toeboards, stacking on the section below.