Free models · CC0
Buildings
Every modern building below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
524 free GLB models
Stone wind wall (Mountaineering and Summit Expedition)
Curved dry stone wind wall of stacked slabs with coping stones and a drift banked on the lee side.
Latrine tent (Mountaineering and Summit Expedition)
Tall single-pole pyramid latrine tent with a barrel pan and four corner guys.
Single-hoop assault tent (Mountaineering and Summit Expedition)
Minimal single-hoop assault tent that tapers to a low tail, for a summit camp on a small platform.
Kitchen tent (Mountaineering and Summit Expedition)
Smaller ridge kitchen tent with a stove flue through the roof, a roll-up side window and a work shelf.
Mess tent (Mountaineering and Summit Expedition)
Large ridge mess tent on an alloy frame with a walk-in doorway, rolled door flaps and eight guy lines.
Base camp dome tent (Mountaineering and Summit Expedition)
Three-person geodesic dome tent with crossed pole arcs, a vestibule and six guy lines to pegs.
High-altitude bivouac tent (Mountaineering and Summit Expedition)
Two-person tunnel tent on three hoops, low profile for a high camp, with eight guy lines.
Wood store (Backcountry Snowboarding and Avalanche Safety)
Open-fronted log store with a snow-laden lean-to roof, five courses of split logs, a splitting block and an axe.
Backcountry hut (Backcountry Snowboarding and Avalanche Safety)
Small unserviced log hut on piers with a steep snow-laden roof, icicles at the eaves, a raised entry deck and a stove flue.
Corrugated grain silo (Arable Fields and Farm Machinery)
A 5.4 m diameter corrugated steel grain silo about 10 m to the vent: stepped ring courses, a conical roof with a vent cap, a caged ladder to the roof and a discharge chute onto a concrete plinth.
Grain store shed (Arable Fields and Farm Machinery)
A twelve by eighteen metre steel portal frame grain store: concrete panel walls below profiled sheeting, a roller shutter in the gable, personnel door, wall fan, internal grain walling and a bucket elevator on the end.
Open-fronted machinery shed (Arable Fields and Farm Machinery)
A ten by fifteen metre open-fronted machinery shed: a steel portal frame with corner piers and two mid columns, clad rear and sides, and a rear tool rack with a parts cabinet.
Hangar Frontage (Airport Terminal and Ground Operations)
Maintenance hangar frontage: a gabled shed with a real bored door opening, six folding door leaves with glazed upper panels, a coloured header band, a threshold strip, side walls and a ribbed roof deck.
GSE Store (Airport Terminal and Ground Operations)
Ground equipment store: a three bay open-fronted shed on a paved slab, with piers between the bays, a mono-pitch ribbed roof with a coloured fascia and edge rail, racking along the back wall, bay markings and a wall display.
Crew Building (Airport Terminal and Ground Operations)
Two storey airside crew and operations building: a banded block with continuous window ribbons and mullions on both floors, a parapet, a canopied glazed entrance on a paved forecourt, a roof plant housing and mast aerials.
Control Tower (Airport Terminal and Ground Operations)
Airfield control tower: a two storey glazed base block with an entrance canopy, a tapered shaft carrying a spiral stair band, and an outward-raked glazed cab with mullions, a service gallery with railings, roof antennas and a mast light.
Jet Bridge (Airport Terminal and Ground Operations)
Two section telescoping passenger boarding bridge: a fixed terminal rotunda and inner tunnel, a named outer tunnel with a glazed window band, a named wheeled lift bogie on twin columns and a named rotating cab with a canopy lip and threshold plate.
Terminal Floor Tile (Airport Terminal and Ground Operations)
Four metre terminal floor tile: a polished slab with an inlaid border band on all four edges and a lighter centre panel, laid on a 4 m grid to floor a concourse.
Panoramic Lift (Airport Terminal and Ground Operations)
Two floor panoramic passenger lift: a four column glazed shaft with a head deck, a glazed car at the lower landing with a lit ceiling and handrail, centre-opening door leaves on a named pivot and a landing call panel.
Escalator (Airport Terminal and Ground Operations)
Single width escalator rising 3.2 m over a 5.6 m incline: a boxed truss with a saw-tooth step band, comb plates at both landings, glazed balustrades with newel ends and a dark moving handrail.
Travelator Section (Airport Terminal and Ground Operations)
Eight metre level travelator section: a shallow pallet deck with cleat lines and amber comb plates at both ends, glazed balustrades with dark handrails, newel ends and a start-of-run status post.
Retail Unit (Airport Terminal and Ground Operations)
Airside retail unit: a boxed shop with a deep signage fascia over a full-width glazed front, a service counter with a till, and two runs of three-tier gondola shelving stocked with blank cartons.
Cafe Unit (Airport Terminal and Ground Operations)
Concourse cafe counter: an amber service bar with a glazed pastry case, espresso machine and till, a back bar with a three panel menu board and a cup shelf, and two bar stools.
Ward Bay Corner (Hospital Wards and Clinic Operations)
Right-angle partition corner joining a wall run along X to a wall run along Z, with a corner pier and matching skirting and dado bands.