Free models · Game-ready GLB
Buildings
Every modern building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
1,471 free GLB models
Pin Deck, Cleared (Bowling Alley and Pool Hall)
The same pin deck module swept clear, with the ten spots marked and no pins standing, for the frame between a strike and a respot or for a lane that is shut.
Pin Deck with a Full Rack (Bowling Alley and Pool Hall)
A pin deck module on the 1.524 m lane pitch with a full rack of ten pins standing on the real 12 inch triangle, kickback walls either side and the pit shield across the back. The head pin is toward +Z, the way a bowler sees it.
Bowling Lane Module (Bowling Alley and Pool Hall)
A ten foot bowling lane bed module, 1.054 m wide between the gutters and 90 mm above the floor, laid as 39 maple and synthetic boards with a 1 mm shadow between them on a steel sub-frame. Six modules make the regulation 18.29 m from foul line to head pin.
Bowling Lane Module with Range Finders (Bowling Alley and Pool Hall)
The same ten foot lane module carrying the seven range finder arrows in dark inlay, for the module that sits nearest the foul line. The arrows step back from the edges to the centre and point at the pins.
Bowling Gutter Pair (Bowling Alley and Pool Hall)
The pair of 235 mm gutter channels for one ten foot lane module, swept as a shallow U with the kickback wall on the outer side. The wall faces land on the 1.524 m lane pitch, so two lanes side by side share the kickback back to back.
Bowling Approach and Foul Line (Bowling Alley and Pool Hall)
A fifteen foot approach module the full 1.524 m lane pitch wide, in the same board construction as the lane, with the foul line inlaid across its far end and both rows of approach dots. Approaches butt side to side so a row of lanes shares one continuous run-up.
Acoustic Ceiling Cloud (Music Recording Studio and Instruments)
A 1.2 by 0.9 m absorber cloud on four hanging wires: a timber frame wrapped in grey fabric with 550 mm of wire above it and ceiling anchors. The origin is at the bottom of the panel, so placing it at the ceiling height less the drop hangs it correctly.
AnimatedStudio Door Module (Music Recording Studio and Instruments)
A 1.2 m wall module 2.4 m tall with a heavy acoustic studio door: a 860 by 2040 mm leaf with a fabric inset, a lever handle and three hinges, in a timber lined frame with a skirting. It carries the same wall-left and wall-right ports as the acoustic panel module.
Control Room Window Module (Music Recording Studio and Instruments)
A 2.4 m wall module 2.4 m tall with a 1.8 by 1.1 m double glazed studio window at 950 mm: two panes splayed apart in timber reveals, with a sill, a head and a skirting. Its wall-left and wall-right ports line up with the 1.2 m wall grid, so it drops into a run of acoustic panels.
Corner Bass Trap (Music Recording Studio and Instruments)
A 2.4 m corner bass trap: a 300 mm column with a quarter round fabric wrapped absorber across its face, timber caps and a skirting. Its wall-left, wall-right and wall-back ports meet the end of a wall run on either axis, so it closes a corner or caps an open end.
Acoustic Wall Panel Module, Amber (Music Recording Studio and Instruments)
The same 1.2 m treated wall module with the absorber wrapped in amber fabric, so a run of walls can be banded in colour instead of reading as a grey box.
Studio Floor Module, Grey (Music Recording Studio and Instruments)
The same 1 m floating floor module in a grey painted finish, for a control room floor that reads apart from the live room next door.
Studio Floor Module (Music Recording Studio and Instruments)
A 1 m square floating floor module in oak boards on a resilient mat, 30 mm thick, with floor-left, floor-right, floor-front and floor-back ports at the edge midpoints so modules tile both ways across a room.
Acoustic Wall Panel Module (Music Recording Studio and Instruments)
A 1.2 m wall module 2.4 m tall: a stud wall with a skirting and a framed 50 mm acoustic absorber in grey fabric on its face, with wall-left and wall-right ports at half height so modules run into each other, into a window module or into a corner bass trap.
Ticket Kiosk (Baseball Park and Batting Cages)
A 2.4 m square concession and ticket kiosk 2.8 m tall: a navy box with a white counter under a red awning, a steel framed serving window and a blank board on the back.
Batting Cage Frame (Baseball Park and Batting Cages)
An 8 by 3.6 m batting cage 3.2 m high: a steel frame netted on both sides, over the top and across the closed end, with a padded back board and navy skirts, open at the hitter end.
Bleacher Stand (Baseball Park and Batting Cages)
A 6.2 m five row bleacher: timber benches and backs on a raked steel frame with side rails and a navy hoarding across the top row, for the crowd behind the plate.
AnimatedDugout Unit (Baseball Park and Batting Cages)
A 4 m dugout unit: a concrete pad, a navy back wall under a charcoal roof, a slatted bench with a helmet shelf under it and a front railing with a gate that swings onto the field.
Backstop Fence Panel (Baseball Park and Batting Cages)
A 3 m bay of 4.2 m backstop fencing: charcoal posts and rails, steel mesh and a navy padded kick plate, the wall that keeps a foul ball out of the seats.
AnimatedBackstop Gate Panel (Baseball Park and Batting Cages)
A 3 m backstop bay with a 2.2 m mesh gate in it: the same posts and rails as the plain bay, mesh light over the head and a single leaf that swings out of the field.
Outfield Wall Corner (Baseball Park and Batting Cages)
The right angle return for the outfield wall: two padded arms meeting in the corner where the wall turns up the foul line, on the same ports and section as the straight bay.
Outfield Wall Panel (Baseball Park and Batting Cages)
A 4 m bay of outfield wall 2.5 m high: a charcoal carcass on a footing, navy padding across the whole field face with the white home run line over it, and two back pilasters.
Interlocking Rubber Floor Tile (Ice Hockey Arena and Locker Room)
A 1 m interlocking rubber locker room tile, 20 mm thick, with three teeth on each of its +X and +Z edges and the matching channel on the other two. The wearing face carries the moulded stud pattern a skate blade can be walked over.
AnimatedPenalty Box (Ice Hockey Arena and Locker Room)
A 2.4 m penalty box on the same construction as the bench: dasher board with an 800 mm hinged door, a white back wall with a blue cap and a red sign panel, side walls, a rubber floor and a slatted bench.