Free models · Game-ready GLB
Buildings
Every realistic building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
647 free GLB models
Roof shade screen gantry (Garden Centre and Florist)
A retractable shade screen: two alloy posts carrying a roller tube at 2.55 m, a knitted screen part unrolled onto a leading bar on guide wires, and a geared drive box on the end post.
Glasshouse entrance lobby (Garden Centre and Florist)
The lobby bay at the head of a glasshouse run: a projecting flat roofed canopy on two columns, a pair of sliding leaves in a full height screen, a matwell and a blank fascia board.
Gutter and downpipe run (Garden Centre and Florist)
A 2 m eaves gutter section on brackets with an outlet, a 2.4 m downpipe on wall clips and a shoe discharging over a leaf trap at ground level.
Glasshouse door bay (Garden Centre and Florist)
A glasshouse bay with the customer entrance in its front wall: a 1.1 m glazed door in an aluminium frame with a threshold, a kick plate and a pull handle, hinged as a named node.
Glasshouse bay module (Garden Centre and Florist)
A 2 m retail glasshouse bay on a 4 m span: half width aluminium portal frames at both edges, glazed side walls on a 450 mm dwarf wall, two glazed roof slopes, eaves gutters and a ridge capping.
Glasshouse ridge vent (Garden Centre and Florist)
A 1.2 m ridge vent unit: a section of ridge capping with a glazed sash hinged along the ridge, a rack and pinion stay arm, and the drive shaft brackets that carry it.
Decontamination arch (UFO Crash Site and Recovery Facility)
A 3 m walk-through decontamination arch: an arched shell of real thickness, twenty one spray nozzles on three rings and two side rails, two lamp strips, a grated floor between yellow kerbs and a control box.
Observation gantry (UFO Crash Site and Recovery Facility)
A 7 m elevated observation walkway at 3.4 m: six columns on pads with knee braces, a grated deck, handrails with toe boards on both sides and the end, a nine-tread stair flight with its own rails and a deck light.
Overhead crane rail (UFO Crash Site and Recovery Facility)
A 12.4 m span overhead travelling crane 7.2 m to the walkway: four columns on pads with knee braces, two runway beams, a twin girder bridge on end carriages, a trolley node and a hook block node hanging on its ropes, plus a wall pendant station.
Wash-down bay (UFO Crash Site and Recovery Facility)
A 5.4 by 6.4 m drive-through wash-down bay: a portal frame with an arched ridge, side and overhead spray bars with twenty one nozzles, a grated sump floor inside concrete kerbs and a pump skid with its delivery hose.
Containment cell (UFO Crash Site and Recovery Facility)
A 4.4 by 4 m sealed cell: steel walls with external ribs, roof plant and service risers, a 2.5 m viewing window in pressure frames, a hinged sealed door with a vision port, a grated floor, a ceiling light panel and a lit central plinth. Interior surfaces are modelled.
Twin leaf blast door (UFO Crash Site and Recovery Facility)
A 6.4 by 5 m twin leaf sliding blast door in a concrete portal: ribbed steel leaves on floor tracks and a head beam, two drive units, chevron edge markings, a warning beacon and a control box. Each leaf is a separate node.
Bay floor slab (UFO Crash Site and Recovery Facility)
An 18 by 6 m bay floor on the hangar pitch: a 0.15 m concrete slab with expansion joints, painted lane edges and bay markings, kerbs down both sides, a centre drainage channel with grating and eight recessed tie-down sockets. Lay a run of these for an open bay.
Hangar bay end wall section (UFO Crash Site and Recovery Facility)
The bay section closed at its north face by a gable wall with a 7.8 by 6 m craft door opening framed in steel and a personnel door beside it, leaving only the south port free.
Hangar bay shell section (UFO Crash Site and Recovery Facility)
A 6 m deep section of an 18 m span hangar bay: a segmental arch shell with real wall thickness, a 0.15 m floor slab, three internal portal frames, cladding ribs, a glazed clerestory each side, three roof lights and four high bay lamps. Sections butt on a 6 m pitch.
Tented hangar (UFO Crash Site and Recovery Facility)
An 18 by 16 m fabric hangar: five steel arches on concrete rails carrying a lofted barrel skin with five purlins, a closed end gable and a rolled door flap on the open end.
Field tent (UFO Crash Site and Recovery Facility)
A 4.4 m ridge tent: a lofted fabric skin with vertical walls and a bowed ridge, external ridge pole, two uprights, four guys with ground pins and a rolled door flap.
Partition run end post (Downtown Office Interiors)
A 60 mm partition run end post, 2.6 m tall, closing a glazed run against a wall, with a glazing channel on its left face and three wall fixings.
Partition corner post (Downtown Office Interiors)
An 80 mm partition corner post, 2.6 m tall, turning a glazed run through ninety degrees; glazing channels on the left and rear faces.
AnimatedGlazed partition door module (Downtown Office Interiors)
A 1.2 m glazed partition door module on the same 2.6 m frame: a hinged framed glass leaf as a named node with a lever handle, two barrel hinges and an overpanel.
Glazed partition module, 1.2 m (Downtown Office Interiors)
A 1.2 m glazed office partition module, 2.6 m tall on an 80 mm frame: head and cill channels, two stiles, a full-height pane and a manifestation band at 1.42 m.
AnimatedAcoustic meeting pod, four person (Downtown Office Interiors)
A 2.24 m by 1.72 m four-person acoustic meeting pod: felt-lined walls, glazed front lights either side of an open entry bay, two piped bench seats, a pedestal table with a cable box and a roof vent.
AnimatedAcoustic phone booth (Downtown Office Interiors)
A 1.02 m single-occupancy acoustic phone booth: felt-lined walls on a raised plinth, a glazed hinged leaf as a named node, a laptop shelf, a leaning stool, a roof ventilation grille and a downlight.
Corrugated grain silo (Arable Fields and Farm Machinery)
A 5.4 m diameter corrugated steel grain silo about 10 m to the vent: stepped ring courses, a conical roof with a vent cap, a caged ladder to the roof and a discharge chute onto a concrete plinth.