3DAssets.dev

Loading model

About

Support panel carrying a taped lay-on with cream tape tabs at four corners; tabs touch, never float. Dimensions 0.50 × 0.02 × 0.40 m (X × Y × Z). Metre units, +Y up, +Z front; origin on the ground at the footprint centre unless stated. Original walnut, maple, ivory, graphite and brass palette. Static geometry; no rig, animation, collision or navigation data. Static staged equipment only; no heat, vacuum or adhesive simulation, craft recipes or certification.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the asset.

Use the “Taped Lay On Support Panel (Marquetry and Veneer Inlay Workshop)” asset in my project.

Model: https://cdn.3dassets.dev/assets/39103/v1/model.glb
Asset page: https://3dassets.dev/assets/marquetry-and-veneer-inlay-workshop-taped-lay-on-suppo-aa9a91e5
Description: Support panel carrying a taped lay-on with cream tape tabs at four corners; tabs touch, never float.

- Dimensions (X × Y × Z): 0.5 × 0.025 × 0.4 metres
- Triangles: 2.1k
- Animations: none
- Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/)
- Loading: Three.js GLTFLoader; no additional decoders required.

Also available as JSON, Markdown, or via the MCP server.

Import manually

Choose your framework, then copy the code into your project to load the asset.

import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'

const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/39103/v1/model.glb', (gltf) => {
  scene.add(gltf.scene)
})

Common questions

How do I use this model with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the model and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Three ways, from quickest to most automatic. Download the .glb with the button and drop it into your engine's asset folder, where it imports like any glTF file. Or skip the download: copy the three.js, React Three Fiber or model-viewer snippet under "Import manually", which loads the model straight from the CDN. Or connect your AI agent to the MCP server and ask for it by name, and it will find, fetch and place the model for you.

MCP server setupAPI reference

Which game engines and tools can I use this model with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. The model is a self-contained binary glTF (.glb) with textures embedded, so there is one file to import and no plugin, converter or decoder to install first.
How do I import this model into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use this model in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every model on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The .glb file has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I need Draco, Meshopt or KTX2 to load it?
No. The geometry is quantized with KHR_mesh_quantization and the textures are re-encoded to WebP, both of which three.js, Godot, Unity and Blender read natively, so a plain GLTFLoader is enough. There is nothing extra to configure and no decoder to ship with your bundle.

Taped Lay On Support Panel (Marquetry and Veneer Inlay Workshop)

Support panel carrying a taped lay-on with cream tape tabs at four corners; tabs touch, never float.

Download asset · 38.3 KB

More in Props & Furniture

Stocked Surfboard Rack (Beach Surf and Paddle Kit)

Stocked Surfboard Rack (Beach Surf and Paddle Kit)

The freestanding surfboard rack stocked for hire: shortboard, fish, soft top learner and longboard standing tail down in the four slots.

@3dassets16.8k tris · 179 ↓
Dune Grass Tuft (Beach Surf and Paddle Kit)

Dune Grass Tuft (Beach Surf and Paddle Kit)

Marram dune grass tuft: 26 tapered curling blades and four seed heads rising from a low sand mound.

@3dassets1.4k tris · 170 ↓
Swim Zone Buoy Orange (Beach Surf and Paddle Kit)

Swim Zone Buoy Orange (Beach Surf and Paddle Kit)

Sun yellow variant of the swim zone marker buoy with a coral cross topmark.

@3dassets1.4k tris · 168 ↓
Beach Umbrella (Beach Surf and Paddle Kit)

Beach Umbrella (Beach Surf and Paddle Kit)

2.4 m beach umbrella: sand anchor with base plate, steel lower pole with tilt collar and knob, timber upper pole, runner and stretchers, eight steel ribs under alternating coral and foam panels with a scalloped valance, vent cap and finial.

@3dassets2.1k tris · 157 ↓
Dune Fence Run (Beach Surf and Paddle Kit)

Dune Fence Run (Beach Surf and Paddle Kit)

2.6 m dune wind fence: three round timber posts, twin twisted wire lines at three heights and weathered grey slats set at slightly uneven heights.

@3dassets2.2k tris · 156 ↓
Folding Beach Chair (Beach Surf and Paddle Kit)

Folding Beach Chair (Beach Surf and Paddle Kit)

Low folding beach chair: steel tube frame with feet, timber armrests and a striped coral and foam sling seat that sags into the back.

@3dassets1.2k tris · 149 ↓
Driftwood Log (Beach Surf and Paddle Kit)

Driftwood Log (Beach Surf and Paddle Kit)

2.8 m weathered driftwood log: twisted tapering trunk, two branch stubs, a splayed root end and one sawn end showing the grain.

@3dassets600 tris · 149 ↓
Warning Flag Pole (Beach Surf and Paddle Kit)

Warning Flag Pole (Beach Surf and Paddle Kit)

3.1 m warning flag pole: the patrol pole with a solid coral no swimming flag and coral finial.

@3dassets742 tris · 146 ↓
Full size open net soccer goal (Football Soccer Stadium and Club Grounds)

Full size open net soccer goal (Football Soccer Stadium and Club Grounds)

Goal with 7.32 m clear width, 2.44 m clear height, 2 m deep open cord net and tubular frame.

@3dassets2.1k tris · 146 ↓
Surf Wax Kit (Beach Surf and Paddle Kit)

Surf Wax Kit (Beach Surf and Paddle Kit)

Surf wax kit lying on the sand: sun yellow wax puck in a paper wrapper, a coral base coat bar and a toothed teal wax comb.

@3dassets1.5k tris · 142 ↓
Lifeguard Megaphone (Beach Surf and Paddle Kit)

Lifeguard Megaphone (Beach Surf and Paddle Kit)

Handheld lifeguard megaphone resting on its grip: coral flared bell with grille, battery housing, pistol grip and trigger, siren switch and carry strap.

@3dassets956 tris · 138 ↓
T shirt on a hanger (Clothing Rail and Wardrobe)

T shirt on a hanger (Clothing Rail and Wardrobe)

A terracotta t shirt hanging on a slim velvet hanger: a shaped shell with shoulders, a slight body taper, short sleeves with turned cuffs and a ribbed crew neck, in the settled shape a jersey tee takes on a rail.

@3dassets1.0k tris · 116 ↓

Similar assets

Fitted Foam Corner Support Set (Museum Conservation and Art Restoration)

Fitted Foam Corner Support Set (Museum Conservation and Art Restoration)

Four fitted L-section foam corner blocks sized around the 1.56 by 1.06 canvas.

@3dassets864 tris · 26 ↓
Corner desk with left return (Downtown Office Interiors)

Corner desk with left return (Downtown Office Interiors)

An L-shaped corner desk: a 1.6 m main run and a 0.8 m by 1.2 m left return joined by a radiused inside corner, carried on a panel end, two A-frame legs and a spine beam.

@3dassets1.5k tris · 25 ↓
Perimeter wall bay corner (Retail Store Fixtures and Mall)

Perimeter wall bay corner (Retail Store Fixtures and Mall)

An internal corner unit joining two perimeter wall runs at 90 degrees: a shelf stack on three uprights with both backs panelled and the kick plinth carried around the corner.

@3dassets960 tris · 28 ↓
Reception back wall with blank sign panel (Office Lobby and Building Facilities)

Reception back wall with blank sign panel (Office Lobby and Building Facilities)

A 3.0 m by 2.6 m reception back wall: five timber panel boards with shadow gaps, a blank raised sign panel on four standoffs carrying no lettering or mark, an accent light reveal and a dark skirting band.

@3dassets704 tris · 42 ↓
Backdrop LED Panel Module (Nightclub and DJ Booth)

Backdrop LED Panel Module (Nightclub and DJ Booth)

A 1 m square LED video panel for the wall behind the booth: a cast frame 100 mm deep with a magenta diffuser face ribbed on the pixel pitch, and corner castings on all four edges so panels tile across and up.

@3dassets1.0k tris · 26 ↓
Mark Spikes and Gaffer Tape (TV Studio and Broadcast Gallery)

Mark Spikes and Gaffer Tape (TV Studio and Broadcast Gallery)

A floor dressing group: two rolls of amber camera tape stood on end, a roll of white tape on its side, a taped presenter mark and a spike line on the floor, and a marker pen. The tape is 96 mm across and sits a couple of millimetres proud of the deck.

@3dassets672 tris · 35 ↓
Ceramic hob, four zone (Home Appliances and Utility Room)

Ceramic hob, four zone (Home Appliances and Utility Room)

A 590 mm four zone ceramic hob with a stainless surround frame: printed dual radiant rings, four front touch keys and a residual heat indicator.

@3dassets1.8k tris · 24 ↓
Double panel radiator 1000 x 600 (Home Appliances and Utility Room)

Double panel radiator 1000 x 600 (Home Appliances and Utility Room)

A 1.0 m double panel convector radiator: two profiled panels with pressed waterways, a welded convector fin bank between them, a top grille, side end panels, a thermostatic valve and a lockshield on wall brackets.

@3dassets2.1k tris · 26 ↓
Craft support cradle (UFO Crash Site and Recovery Facility)

Craft support cradle (UFO Crash Site and Recovery Facility)

A 9 m steel cradle holding a disc craft clear of the floor: four A-frame legs on concrete pads tied by a base ring and diagonal braces, four raked saddles with padded top plates and side stops, a hazard band and a four-tread access stair with rails.

@3dassets816 tris · 35 ↓
Corner entry shower enclosure 900 (Fitted Kitchen and Bathroom Builder)Animated

Corner entry shower enclosure 900 (Fitted Kitchen and Bathroom Builder)

900 mm corner entry enclosure: two fixed wall panels and two named sliding leaves that meet on the open corner.

@3dassets1.2k tris · 24 ↓
Bar front panelling section (Bar, Pub and Brewery Taproom)

Bar front panelling section (Bar, Pub and Brewery Taproom)

A 1.2 m loose section of bar front panelling: a dark skirting plinth, three bevelled fielded panels in a rail and stile frame, corner stiles and a moulded capping rail.

@3dassets894 tris · 34 ↓
Bar counter corner (Bar, Pub and Brewery Taproom)

Bar counter corner (Bar, Pub and Brewery Taproom)

A 90 degree bar counter corner on the same grid: two fielded panel faces meeting on a turned pilaster, a mitred bar top with brass nosing on both edges and a foot rail turning the corner.

@3dassets2.3k tris · 32 ↓