3D Assets
@3dassets
Stowage bag wall (Space Station and Docking Bays)
A 1.9 by 1.7 m stowage wall: a module wall segment with eight soft cargo transfer bags of three sizes, each with a closure flap and a yellow pull tab, held by three webbing straps on two vertical rails.
Crew sleep station (Space Station and Docking Bays)
A 2.05 m crew sleep station: a three-sided acoustic booth with a restrained sleeping bag and pillow, tether straps, a laptop on a swing arm, a reading light, wall stowage pockets and a folded privacy curtain.
Crew laptop station (Space Station and Docking Bays)
A 1.4 m crew laptop station on a section of module wall: a bolted mount plate, a two-segment articulating arm with joint housings, a laptop with a tilted screen, a routed power cable and a wall utility outlet.
Sealed science glovebox (Space Station and Docking Bays)
A 1.7 m sealed science glovebox: a bolted equipment base, a rounded work volume with a front window and frame rails, two gauntlet ports, an interior work tray, a side transfer airlock and a control panel with indicator lights.
Resistive exercise device (Space Station and Docking Bays)
A 2.15 m resistive exercise machine: a bolted base with a grip deck, two cylinder canisters on uprights, a cable pair, a loaded lift bar on the rails, an adjustable foot bar, a pad and a control display.
Payload rack, stowage livery (Space Station and Docking Bays)
The payload rack in the darker stowage livery used for logistics bays, with grey drawer fronts and a gold identification band above the display.
Small propellant tanker (Space Station and Docking Bays)
A 3.8 m propellant tanker: an open aluminium frame carrying two 1.8 m spherical tanks with blanket covers and transfer plumbing, an avionics bay, two 3 m solar wings, four attitude pods and a docking ring.
International payload rack (Space Station and Docking Bays)
A 2.01 m standard payload rack with a trapezoidal shell that follows the module wall: five drawer fronts with pull handles, a control display, a cooling vent stack, rear standoffs with umbilicals and a named tilt hinge node.
Extravehicular activity suit (Space Station and Docking Bays)
A 2.1 m extravehicular suit posed standing: hard upper torso, soft lower torso and limbs with joint bearings, a helmet with a gold visor and light bar, a life support backpack, a chest display module and tether hooks.
EVA manoeuvring unit (Space Station and Docking Bays)
A 1.4 m crew manoeuvring backpack: a blanketed central pack between two wrap-around arms with hand controllers, two nitrogen tanks with feed lines, sixteen thruster nozzles on the arm corners and a yellow foot restraint bar.
Free-flying inspection drone (Space Station and Docking Bays)
A 0.55 m free-flying inspection drone: a rounded cube body with radiator faces, a gold top blanket, a forward camera dome, a side camera, two lights, eight thruster nozzles and a stowage grab loop.
Automated cargo freighter (Space Station and Docking Bays)
A 7.4 m automated cargo freighter: a pressurised cylinder with a forward docking ring, four 4 m solar wings at 45 degrees, four attitude pods, a main engine, a rendezvous antenna and a grapple fixture.
Crew ferry capsule and service module (Space Station and Docking Bays)
A 7 m crew ferry: a blunt cone capsule with an ablative shield, three viewports, four attitude control pods and a nose docking ring, joined to a service module with a main engine bell, two 5.2 m solar wings and body radiators.
Safety tether reel (Space Station and Docking Bays)
A 0.7 m crew safety tether reel: a bolted base with two frame plates, a drum on a named rotating node wound with yellow tether, a guide arm and a deployed tether ending in a snap hook.
External camera arm (Space Station and Docking Bays)
A 2.5 m external camera boom: a bolted base, a blanketed mast with a cable conduit, a named pan node, a tilting camera head with a lens hood and two work lights on a named tilt node.
Reaction control thruster quad (Space Station and Docking Bays)
A 1 m reaction control pod: a bolted mounting plate, a blanketed manifold housing, four splayed bell nozzles, a propellant accumulator sphere and routed feed lines.
External experiment platform (Space Station and Docking Bays)
A 2 by 1.2 m external payload platform on standoff feet: a slatted deck with tie rails, a small telescope tube, a sample exposure tray with a lid on a named hinge node, an avionics box with a radiator fin and an EVA rail.
Mobile base cart (Space Station and Docking Bays)
A 3.6 m mobile base that translates along a truss rail: a rail beam with four named roller nodes, a blanketed carriage, a grapple fixture, avionics boxes, a portable foot restraint plate and two EVA rails.
S-band boom antenna (Space Station and Docking Bays)
A 2.1 m S-band communications antenna: a bolted base, an angled mast, a circular ground plane and a four-arm helix wound about the feed rod with a radome cap and an avionics box.
High gain antenna dish (Space Station and Docking Bays)
A 2.3 m steerable high gain antenna: a bolted base, a two-axis gimbal on named azimuth and elevation nodes, a parabolic reflector with a stiffening rim and a feed horn on three struts.
Robotic grapple fixture (Space Station and Docking Bays)
A 0.7 m flight releasable grapple fixture: a bolted base plate, a target ring, a central grapple pin with three capture ramps and a yellow alignment label for the arm camera.
Dexterous two-arm manipulator (Space Station and Docking Bays)
A 3.4 m dexterous manipulator: a grapple body with a rolling torso node, a shoulder beam carrying two three-joint arms with parallel-jaw grippers, a stereo camera head and two tool holsters.
Latching end effector (Space Station and Docking Bays)
A 1 m robotic end effector: a bolted interface plate, a blanketed barrel, an electrical connector face and a rotating snare ring carrying three capture cables, with a camera and two work lights.
Station manipulator arm (Space Station and Docking Bays)
An 11 m six-joint station manipulator posed mid-reach: a latching base platform with a grapple fixture, two blanketed booms with cable conduits, six named joint nodes, an elbow camera with work lights and a snare end effector.