3D Assets
@3dassets
Trophy Shelf (Ice Hockey Arena and Locker Room)
A 1 m three shelf timber trophy stand with a blue backing panel, carrying three cups on plinths and a mounted shield. Stands against a locker room wall.
Tactics Whiteboard on a Stand (Ice Hockey Arena and Locker Room)
A 1.3 m tactics whiteboard on a splayed steel stand: a white face with a pale rink plan, a red goal line and a blue zone line drawn on it, and a pen tray. The board is fixed to the stand and does not tilt.
Tape and Tools Bench (Ice Hockey Arena and Locker Room)
A 1.6 m equipment bench: a timber top on a blue cabinet with two drawers, a white peg board carrying tape rolls, shears and a knife, and more tape and a tool tray on the top. Drawers are modelled shut and are not rigged.
Water Bottle Rack with Bottles (Ice Hockey Arena and Locker Room)
A six bottle rink carrier: a steel frame with a carry bar and six long straw bottles in red and white. Bottles and carrier are one model, so a bench is dressed with one placement.
Stick Rack (Ice Hockey Arena and Locker Room)
A 1.3 m stick rack: a steel base with two uprights, two rails and seven pairs of blue dividers, so a team hangs its sticks butt up in the room. Nothing on it moves; place sticks against it rather than expecting a clip.
Shin Guards (Ice Hockey Arena and Locker Room)
A pair of shin guards standing on their ankles: white shells with blue knee caps and dark strap runs. The straps are modelled closed and do not move.
Shoulder Pads on a Hanger (Ice Hockey Arena and Locker Room)
A set of shoulder pads on a hanger: a white chest shell with blue caps and bicep guards and a red collar roll. Hang it at a stall hook. The shoulder straps are static.
Jersey on a Hanger (Ice Hockey Arena and Locker Room)
A blue game jersey with white and red waist stripes and a blank white number panel, hanging on a wire hanger. Hang it at a stall hook: the model rests on y=0 with the hook 850 mm above it, so place it at the hook height. The cloth is a rigid shell, not simulated.
Locker Room Stall Unit (Ice Hockey Arena and Locker Room)
A 1.2 m locker room stall 2.05 m tall: a timber back panel and cheeks, a bench seat at 460 mm, a boot shelf under it, a top shelf, three hooks and a blue name plate. Units butt on the 1.2 m module through stall-left and stall-right, so a run of them lines a wall.
Interlocking Rubber Floor Tile (Ice Hockey Arena and Locker Room)
A 1 m interlocking rubber locker room tile, 20 mm thick, with three teeth on each of its +X and +Z edges and the matching channel on the other two. The wearing face carries the moulded stud pattern a skate blade can be walked over.
Hockey Gloves (Ice Hockey Arena and Locker Room)
A pair of hockey gloves sitting palm down: blue backs with segmented fingers, white flared cuffs, red thumbs and a cuff trim. Modelled as one pair in one file, so a stall is dressed with one placement.
Hockey Kit Bag (Ice Hockey Arena and Locker Room)
A 1 m wheeled kit bag: a dark holdall on a rubber base rail with a zip run, a blue panel and static carry straps. Webbing and zips do not move.
Player Helmet with Cage (Ice Hockey Arena and Locker Room)
A red player helmet standing on its own rim as it stands on a stall shelf: a vented two piece shell with a white brow rim, a dark liner edge, ear covers with adjuster discs, and a steel cage clipped to the shell at both sides over a white chin cup. The chin strap is static.
Goalie Skate (Ice Hockey Arena and Locker Room)
The goalkeeper cut of the same skate: a lower, wider white boot with a blue cowling over the toe and a flatter runner. Sits noticeably lower than the player skate beside it.
Goalie Stick (Ice Hockey Arena and Locker Room)
A goalkeeper stick lying flat: a taped butt and knob, a shaft stepping into a 580 mm white paddle with a blue heel band, and a 340 mm blade at the lie angle wrapped with blue tape. Bigger in every dimension than a player stick beside it.
Player Skate (Ice Hockey Arena and Locker Room)
A senior player skate: a dark composite boot with a red heel counter, a padded tongue, laced eyelets and a steel runner in a frame holder. Heel at the origin, toe toward +Z.
Goalie Mask (Ice Hockey Arena and Locker Room)
A goalkeeper mask standing on its chin: a blue shell with a white brow plate and a red top stripe, a steel cat eye cage and a separate backplate. The harness webbing is static.
Goalie Leg Pads (Ice Hockey Arena and Locker Room)
A pair of 920 mm goalkeeper leg pads standing on their toes as they stand in a stall: white faces with blue roll segments, red knee stacks and the outer roll that gives a pad its silhouette. The straps are modelled flat against the pad and do not move.
Hockey Stick, Toe Curve (Ice Hockey Arena and Locker Room)
The same stick with a toe curve blade: a straight heel opening into a hooked toe, longer and narrower, for a quick release.
Hockey Stick, Heel Curve (Ice Hockey Arena and Locker Room)
The same stick with a heel curve blade: the bend sits right at the heel and the toe runs straight off it, the pattern a player who shoots off the back foot picks.
Hockey Stick (Ice Hockey Arena and Locker Room)
A 1.32 m senior hockey stick lying flat as it lies on the ice: a taped butt and knob, a composite shaft and a 300 mm mid curve blade set at the lie angle, wrapped with white tape. The blade curve is modelled, not textured.
Ice Hockey Puck (Ice Hockey Arena and Locker Room)
A regulation vulcanised rubber puck, 76 mm across and 25.4 mm thick, with the milled edge chamfers. Lies flat on the ice.
Puck Bucket (Ice Hockey Arena and Locker Room)
A 440 mm blue bucket with a steel rim and lifting lugs, filled with practice pucks. The pucks are part of the model; the separate puck design is the one to place loose on the ice.
Goal Anchor Peg Set (Ice Hockey Arena and Locker Room)
A tray of four steel goal anchor pegs with red collars and the drift used to set them, for pinning a goal frame into the ice. One placement beside the crease.