3D Assets
@3dassets
Dust extraction duct run, 2 m (Woodworking Workshop and Joinery)
Two metre galvanised extraction duct 220 mm across with flanged joints, a bolted hanger strap and a blanked branch takeoff, ported at both ends so a run repeats across the shop to the extractor.
AnimatedRoller door module, 4 m (Woodworking Workshop and Joinery)
Full height timber delivery entrance module: a 3.2 m by 3.2 m opening in a cream clad surround, charcoal guide channels, red impact posts, a shutter hood and a slatted blue curtain that lifts clear of the opening.
AnimatedCabinet table saw with extension table, 1.6 m (Woodworking Workshop and Joinery)
Cabinet saw on a blue body: a cast steel top split by the blade slot, a lattice extension table on the right, front and rear rails with a yellow rip fence, a riving knife under a crown guard, rise and tilt handwheels, a start and stop station and a dust port at the back.
Workshop ceiling light bar, 2.4 m (Woodworking Workshop and Joinery)
Suspended twin tube light 2.4 m long: a grey steel channel on two drop rods with a charcoal reflector and two cream diffuser tubes, for lighting a bench run or a machine bay.
Workshop floor tile with walkway markings, 4 m (Woodworking Workshop and Joinery)
The same 4 m concrete floor module with a painted safety yellow walkway lane down it, standing 5 mm proud of the slab. Identical edge ports, so it lays into the same grid.
Workshop floor tile, 4 m (Woodworking Workshop and Joinery)
Power floated concrete floor module 4 m square and 120 mm thick with sawn movement joints along both edges, laid on a 4 m grid with edge ports on all four sides.
Workshop wall panel module, 4 m (Woodworking Workshop and Joinery)
Cream painted workshop wall 4 m wide and 2.8 m tall on a concrete plinth, with timber battens, a safety yellow impact rail and a capping rail, side ports on the centre line and a top port for the glazed strip that courses above it.
Workshop window strip module, 4 m (Woodworking Workshop and Joinery)
Glazed clerestory course 4 m wide and 1.2 m tall with charcoal mullions, sill and head, built to sit on the wall panel's top port and carry the run up to 4 m so the bench works under daylight.
Central Bus Station and High Street Stop (Bus Station and City Transit)
A working city bus station on a 48 x 55 m plot laid in one continuous surface: six marked stand bays either side of an island platform, a canopy assembled over its back half on its own columns, shelters, stand totems, a departure board and benches along the platform, a glazed...
Street Planter (Bus Station and City Transit)
A 1.4 x 1.0 m precast concrete planter with a charcoal soil bed, four clipped shrubs and two flowering heads. The foliage is faceted solid, not cards or alpha.
Street Lamp (Bus Station and City Transit)
A 7 m street lamp on a cast base: a tapered steel column, a swept arm and a charcoal lantern with a yellow lens under it. No light source is embedded; light it in the engine.
Traffic Light (Bus Station and City Transit)
A 3.35 m traffic signal on a cast base: a charcoal head with three hooded aspects. The aspects are painted red, amber and blue, because this eight material family carries no green, and none of them is emissive. Static.
Road Sign Set (Bus Station and City Transit)
A 2.9 m sign post carrying three plates: a red roundel with a white centre, a blue direction plate with a painted legend and a yellow warning plate lower down. The legends are painted blocks, not readable text. Static.
Cycle Rack (Bus Station and City Transit)
Three steel hoop stands 800 mm apart on a 2.4 m run, each with a blue collar at leaning height. The stands are modelled as solid hoops with no ground sockets.
AnimatedStreet Litter Bin (Bus Station and City Transit)
A ribbed steel street bin with a blue domed lid hinged along its back edge and a moulded handle. The liner is not modelled.
Street Bench (Bus Station and City Transit)
A 1.8 m public bench: three yellow seat slats and three back slats on cast charcoal ends. Static.
Street Bollard (Bus Station and City Transit)
A 970 mm steel bollard on a cast base with a domed cap and a yellow high visibility band. Static.
Timetable Case (Bus Station and City Transit)
A 2.05 m timetable case on two steel legs: a charcoal frame around a yellow sheet with a blue header. The printed timetable is a painted panel, not readable text. Static.
Bus Shelter with Advertising Panel (Bus Station and City Transit)
A 3.95 x 1.5 m kerbside shelter: four steel posts, a glazed back and end, a blue roof with a front fascia, a yellow perch rail and a red advertising case with a poster on each face closing the other end. Static.
Bus Stop Pole with Flag (Bus Station and City Transit)
A 3.1 m stop pole on a cast base: a blue flag plate with a yellow route panel at the top and a timetable sheet clipped to the pole below it. The route numbers are painted blocks, not readable text. Static.
Raised Boarding Kerb Section (Bus Station and City Transit)
A 4 m kerb section at the raised 160 mm boarding height a low floor bus docks against, with a charcoal nosing on the road face and a yellow tactile strip along the pavement side. Sections butt end to end.
Pedestrian Guard Rail Section (Bus Station and City Transit)
A 2 m bay of pedestrian guard rail: two end posts, a steel top rail, a blue middle rail and three infill bars. Bays butt end to end along a kerb.
Pedestrian Crossing Tile (Bus Station and City Transit)
A 6 x 7 m crossing module: seven painted bars across the carriageway between two yellow give way lines, on the same tarmac slab and the same end ports as the road tiles.
Road Tile Plain (Bus Station and City Transit)
The same 6 x 7 m road module without the bus lane: edge lines and a dashed centre line only, for the length of street either side of the priority section.