Free models · Game-ready GLB
Animated
Every stylized model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
424 free GLB models
Physio Bed (Velodrome and Track Cycling)
A 1.9 m portable physio bed with a blue base, a white pad and a head section that is a named node and lifts on its hinge. Empty, made up and unoccupied: there are no people in this pack.
Spares Crate (Velodrome and Track Cycling)
A wheeled blue spares crate 0.9 m long with a charcoal lid hinged along its back edge and banding round the body. The lid and the two castor pairs are named nodes. Closed and empty.
Mechanics Bench with Tools (Velodrome and Track Cycling)
The track centre workbench: a 2 m charcoal carcass with a timber top, two tool drawers, a vice, a parts tray and hand tools hung on a rail over it. The left drawer is a named node on its runners.
Track Pump (Velodrome and Track Cycling)
A floor standing track pump 1.25 m tall: a weighted foot with a step plate, a steel barrel with a yellow collar, a pressure dial and a T handle that is a named node and strokes down the barrel. The hose is a solid strip and does not move.
Turbo Trainer (Velodrome and Track Cycling)
A direct drive turbo trainer standing empty: splayed charcoal feet, a resistance unit body with a red cover and a steel drive drum that is a named node and spins. No bicycle is fitted, so it can be paired with any of the three bicycles.
Track Bicycle on a Work Stand (Velodrome and Track Cycling)
The track bicycle held clear of the floor in an A frame rear wheel stand, which is how it sits for a gear change or a wash. Both wheels are named nodes and spin freely. Riderless, and the chain is one solid strip that does not move.
Track Bicycle (Leaned) (Velodrome and Track Cycling)
The same track bicycle tipped 15 degrees onto its side, as it stands leaned against a rail or a barrier. The wheels are still named nodes and still roll. Riderless, and the chain is one solid strip that does not move.
Warm Up Roller Set (Velodrome and Track Cycling)
A three drum roller set for warming up on: a low charcoal frame, two rear drums and one front drum on steel rails, with the belt between them modelled as a solid strip. Each drum is a named node on its own axle and spins. 1.5 m long.
Track Bicycle (Upright) (Velodrome and Track Cycling)
A fixed gear track bicycle standing upright on both wheels: steel frame, drop bars, one chainring and no brakes. Both wheels are named nodes on their own axles. Riderless, and the chain is one solid strip that does not move.
Lap Board and Stand (Velodrome and Track Cycling)
The laps to go board on its stand: a two post frame with a blank white card and a hinged charcoal leaf over it that flips on the head rail. The number face is a plain white block, so a project can letter it however it likes.
Bell on a Stand (Velodrome and Track Cycling)
The bell rung for the last lap, hung from a two post stand 1.6 m up: a brass coloured bell with a clapper ball, on a named node at the head rail so the whole bell rocks. The stand is ballasted and the bell is struck by hand, so nothing else moves.
Timing Hut (Velodrome and Track Cycling)
The trackside timing hut: a 3 by 2.4 m cabin with a long glazed window to the track, a charcoal roof, a step at the door and a blank red fascia band. The door is a named node on its hinge stile. Empty inside and unlit.
Judges Tower (Velodrome and Track Cycling)
The raised officials tower on the home straight: a concrete base, four steel legs, a glazed cabin 3.3 m up with a run of steps to its door, and a flat roof deck. The cabin door is a named node on its hinge stile. Unlit and unoccupied.
Starting Gate with Holder Frame (Velodrome and Track Cycling)
The wheeled frame that holds a bicycle upright for a standing start: a ballasted base on castors, two uprights and a head rail, with a hinged holder arm that lifts clear to release. The arm is a named node on the head rail pivot.
Display Plinth With A Turntable (Dragons and Wyverns)
Round timber plinth 0.86 m tall whose banded top turns on its own node. Stand an egg, a skull or a hatchling on it.
Iron Cage With An Opening Door (Dragons and Wyverns)
Barred iron cage 2.56 m square and 2.6 m high with a timber floor and a door on its own hinge node.
Treasure Chest With An Opening Lid (Dragons and Wyverns)
Banded timber chest 1.07 m wide with a lipped lid on its own hinge node and coins spilling inside.
Lacquer Storage Chest (Imperial China Palace and Garden)
A red lacquer chest on a stand with bronze corner plates, a hasp and carrying handles, and a lid that lifts on its back edge.
Bronze Bell On Frame (Imperial China Palace and Garden)
A cast bronze bell hung from a carved timber frame with a swinging beam beside it, and an invented band of raised bosses round the waist. The bell swings.
Ceremonial Drum On Stand (Imperial China Palace and Garden)
A large barrel drum in a carved timber cradle with bronze hoop studs and two beaters on a hook. The drum tilts in its cradle.
Training Dummy (Imperial China Palace and Garden)
A padded training post on a weighted timber cross base, with three striking arms and a bound straw torso. The post rocks on its spring foot.
Folding Screen (Imperial China Palace and Garden)
A four panel folding screen in a lacquered frame with abstract painted fields, standing 1.9 m tall. The two outer leaves swing on their hinges.
Courtyard Well (Imperial China Palace and Garden)
A courtyard well: an octagonal stone kerb with a bucket on a rope over a timber windlass, under a small tiled canopy on two posts. The windlass turns.
Bronze Tripod Cauldron (Imperial China Palace and Garden)
A large bronze ritual cauldron on three tapered legs, with cast handles, a band of invented key pattern and a domed lid that lifts.