Free models · Game-ready GLB
Medieval
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
893 free GLB models
Stake anvil in a block, 0.66 m (Blacksmith Forge and Armoury)
Small bickern stake with a round horn one side and a square bick the other, driven into an oak block and used for the light work a great anvil is too coarse for.
Water butt under a spout, 1.25 m (Blacksmith Forge and Armoury)
Full height coopered water butt 1.25 m tall on a stone plinth with a lead spout over it and a wooden pail beside it, the shop's water supply for the quench trough and the slack tub.
Great anvil on an oak stump, 0.98 m (Blacksmith Forge and Armoury)
A 150 kg London pattern anvil on a banded oak stump: cast body with a ground steel face, a round horn, a hardy hole and a pritchel hole in the heel, staples over the feet and the smith's hammer lying on the face.
Fire irons in a stand, 1.3 m (Blacksmith Forge and Armoury)
Forged rake, poker, slice and fire shovel standing in an iron ring stand on a weighted base, the tools that work the firepot and clear the clinker out of it.
Stone quench trough, 1.6 m (Blacksmith Forge and Armoury)
Hollowed stone quench trough 1.6 m long on two block bearers, filled with still water and with a pair of tongs laid across the rim, for taking the heat out of a forging beside the anvil.
Slack tub, 0.8 m (Blacksmith Forge and Armoury)
Coopered oak half barrel bound with three iron hoops and filled with water, the smith's slack tub for cooling tongs and hardening small work, with a dipper hooked over the rim.
Charcoal heap on boards, 1.4 m (Blacksmith Forge and Armoury)
Loose heap of charcoal on a boarded pallet 1.4 m across, with lumps spilled round the edge and a rake mark through the top, for the fuel corner of a smithy or a charcoal burner's yard.
Coal scuttle with shovel, 0.66 m (Blacksmith Forge and Armoury)
Riveted iron scuttle with a swing handle and a rolled rim, filled with coal and with the small fuel shovel standing in it, for carrying fuel from the store to the firepot.
Coal store bay, 2.4 m (Blacksmith Forge and Armoury)
Boarded fuel bay 2.4 m wide with oak corner posts, a low front board and a heaped load of coal and coke behind it, the way fuel is kept dry against the back wall of a smithy.
Stone forge hearth with hood and flue, 3.8 m (Blacksmith Forge and Armoury)
The hearth the shop is built round: a rubble stone bench 2.4 m wide with a raised firepot of coke and glowing coals, a tuyere entering from the back, a stone back wall, and a tapered hood on two iron posts carrying the flue up to 3.8 m, with the fire irons leaning at the side.
AnimatedGreat double bellows on a frame, 2.2 m (Blacksmith Forge and Armoury)
Twin leather bellows on an oak frame 2.2 m long: a fixed lower board, a pleated leather body with iron nail rows, a weighted top board on its hinge nose and the blast pipe running out to the tuyere, worked by the chain hanging at the back.
Stone chimney stack, 4.6 m (Blacksmith Forge and Armoury)
Rubble stone chimney stack 4.6 m tall on a 1.15 m square base, battered in twice to a corbelled cap with an open flue mouth, for standing behind a forge hearth or against a workshop gable.
Lean-to roof panel, 4 m (Blacksmith Forge and Armoury)
Boarded and slated lean-to roof panel 4 m wide and 2.6 m along the slope, pitched about 18 degrees on three oak rafters, for covering a coal store or a stock bay against the back wall of a yard.
Open timber frame bay, 4 m (Blacksmith Forge and Armoury)
Open post and beam bay 4 m wide and 3.2 m tall: two oak posts on stone pads carrying a tie beam with curved braces and nothing between them, so a workshop can stand open to the yard on the same wall ports as a solid panel.
AnimatedShutter counter shop front, 4 m (Blacksmith Forge and Armoury)
Timber framed shop front 4 m wide with a 2.4 m opening over a stone counter sill: the boarded shutter is hinged along the sill and drops forward onto two iron stays to become the selling counter, which is how a medieval shop front works.
AnimatedStable door module, 4 m (Blacksmith Forge and Armoury)
Timber framed wall module with a 1.2 m by 2.1 m boarded stable door in it: two leaves hung on the same jamb with strap hinges and a ring latch, so the top can stand open over a closed bottom the way a workshop door is used.
Timber framed dwarf wall, 4 m (Blacksmith Forge and Armoury)
Waist high oak framed wall 4 m wide and 1.1 m tall with a capping rail, for closing the open side of a workshop without shutting the light or the view out: side ports on the centre line at 0.55 m.
Forge yard cobbles, 4 m (Blacksmith Forge and Armoury)
The same 4 m floor module laid as a cobbled yard instead of flags: a bedding slab under a field of small setts on the same edge ports, for the ground outside the shop front.
Timber framed wall module, 4 m (Blacksmith Forge and Armoury)
Oak framed wall 4 m wide and 3.2 m tall: a sill beam, corner and middle posts with curved braces, limewashed wattle and daub infill set back between them and a top plate, with side ports on the centre line at 1.6 m.
Forge floor slab, sooted, 4 m (Blacksmith Forge and Armoury)
The flagged 4 m floor module with the scale, clinker and soot of the hearth side trodden into it: raised patches of charcoal dust and a scatter of scale across the flags, on the same edge ports.
Forge floor slab, 4 m (Blacksmith Forge and Armoury)
Flagged stone floor module 4 m square and 130 mm thick, sixteen riven flags standing proud of a bedding slab with open joints between them, laid on a 4 m grid with edge ports on all four sides.
Cloister Garth and Outer Court (Medieval Monastery and Scriptorium)
A working monastery round a 12 m cloister garth: sixteen arcade bays and four corners, vaulted and roofed the whole way round with the corner angles left open over the walk, a paved alley round a lawn with the well and the herb beds, the scriptorium desks, stools and...
Compost Bay (Medieval Monastery and Scriptorium)
Free 3D model of a medieval compost and muck bay: a boarded oak bay on driven posts, open at the front, heaped with rotted matter and green waste, with a fork, 2.4 m wide.
Wood Stack (Medieval Monastery and Scriptorium)
Free 3D model of a medieval firewood stack between two pairs of driven stakes: seventy six split logs in seven courses under a board cover, 2.8 m long.