Free models · Game-ready GLB
Animated
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
2,066 free GLB models
AnimatedButton and notions drawer unit (Dry Cleaners and Alterations Shop)
A 1.04 m chest of four teal drawers with blank label windows and recessed pulls under a beech top, with loose buttons and a zip on the top. The top drawer runs on its slides and pulls out with its box.
AnimatedSewing machine on a table (Dry Cleaners and Alterations Shop)
A beech topped steel table with a domestic weight machine on it: bed, arm, head with a needle bar and presser foot, a teal badge plate, two thread cones on pins, a knee lever under the top and a length of work under the foot.
AnimatedOverlocker on a table (Dry Cleaners and Alterations Shop)
The same table carrying the second machine every alterations room has: a squarer teal head, a four cone thread tree on a crossbar and a polythene trim chute hanging off the right end.
AnimatedShirt press unit (Dry Cleaners and Alterations Shop)
Twin shaped shirt bucks on one 1.36 m pedestal with a teal fascia, a hinged press head over the near buck, a steam column with two dial gauges and a pair of amber foot pedals.
AnimatedPressing station with vacuum table and iron (Dry Cleaners and Alterations Shop)
The signature machine of the trade: a padded vacuum buck on an enamelled pedestal with a teal fascia and an amber stripe, a hinged press head with a lagged shoulder and a lever, two amber foot pedals and a steam iron with a real soleplate on its rest.
AnimatedSorting bin bank (Dry Cleaners and Alterations Shop)
Three bagged sorting hoops in a 1.68 m steel frame with blank bay cards, the centre bay under a hinged lid with a teal pull for soiled work.
AnimatedGarment trolley, teal canvas (Dry Cleaners and Alterations Shop)
The same trolley with the canvas bin and its garments in the house teal, so a plant full of trolleys does not read as one repeated object. Geometry and clips are identical.
AnimatedLint and filter trolley (Dry Cleaners and Alterations Shop)
An open mesh cage trolley on four castors with a teal push handle, loaded with four pulled panel filters on edge and a wad of lint on top of them.
AnimatedGarment trolley on castors (Dry Cleaners and Alterations Shop)
A tubular trolley on four castors: a rail at 1.62 m hung with four covered garments over a slung canvas bin with a teal band, and a teal push bar on the operator side.
AnimatedTumble dryer (Dry Cleaners and Alterations Shop)
A 1.86 m enamelled drying cabinet with an amber plinth stripe, a wide hinged door carrying a large glazed port in a teal ring, a bar handle, a lint filter drawer at the base and the extract duct off the top.
AnimatedWasher extractor (Dry Cleaners and Alterations Shop)
The wet cleaning side: a 1.42 m washer extractor on a charcoal plinth with a teal fascia, a hinged round door with a glazed port, a perforated drum, a soap hopper on top and a control panel with a dial gauge.
AnimatedDry cleaning machine with loading door (Dry Cleaners and Alterations Shop)
The solvent machine: a 1.34 m enamelled cabinet on a charcoal plinth with a teal fascia round the loading door, a hinged round door with a glazed port and a lever, a perforated drum behind it, a button trap, a control fascia and the filter and still tower on its flank.
AnimatedShop door module (Dry Cleaners and Alterations Shop)
The 1.5 m by 3 m shop wall with a half glazed teal door on a real hinge: a tiled dado, a stainless threshold, a transom light and a steel push bar. Couples to the plain wall module on its stiles.
AnimatedGarment conveyor rail unit, warm run (Dry Cleaners and Alterations Shop)
The loaded unit with the garments recoloured into the warm half of the palette, so a long run of rail does not repeat the same four colours down the shop. Geometry, ports and clips are identical.
AnimatedGarment conveyor rail unit, loaded (Dry Cleaners and Alterations Shop)
A 1.6 m bay of the powered rail a cleaner stores finished work on: two posts, a head channel with a teal band, the rail at 2.0 m with seven carrier hooks, a chain drive wheel on the left post and seven bagged garments hanging from it.
AnimatedGarment conveyor rail unit, part loaded (Dry Cleaners and Alterations Shop)
The same unit with three garments left on it, for the end of a run, a collected bay or a shop part way through a busy afternoon. Identical geometry, ports and drive wheel to the loaded unit.
AnimatedService counter module with till and card reader (Dry Cleaners and Alterations Shop)
The 1.2 m pay point of the counter run: an enamelled carcass on a charcoal plinth with a teal fascia and a stainless deck, carrying a register on a raised plate, a customer display on a stub column, a card reader on a gooseneck and a cash drawer on runners.
AnimatedEntrance barrier with lifting arm (Recycling Centre and Waste Transfer Yard)
Site entrance barrier: a charcoal cabinet on a bolted base with an orange access door and a blue notice plate, and a 4 m steel arm banded in orange with a charcoal end block, tilting up clear of the queue lane.
AnimatedConveyor feed hopper (Recycling Centre and Waste Transfer Yard)
Feed hopper and short belt on a charcoal lattice stand 3.4 m tall: a steel hopper with sloped walls and a yellow rim, an inclined belt running out of its throat on three rollers that spin, and a guarded head drive.
AnimatedVertical baler (Recycling Centre and Waste Transfer Yard)
Vertical mill size baler 2.2 m wide and 3.2 m tall: a green chamber on a charcoal frame with a steel platen head, a yellow charging lid that lifts, a blue control box with modelled buttons and a finished bale on the discharge floor.
AnimatedSkip lorry with hook arm (Recycling Centre and Waste Transfer Yard)
Two axle hook loader lorry 7.6 m long: an orange day cab with a charcoal screen and a steel bumper, a charcoal chassis with the subframe and rear rollers, six wheels that roll and a hook arm that tilts up to lower a skip off the back.
AnimatedYard wheel loader with tipping bucket (Recycling Centre and Waste Transfer Yard)
Articulated wheel loader 6.6 m long: an orange rear body with the engine hood, counterweight and exhaust, a charcoal glazed cab under a steel roof, a front body on the articulation joint, four wheels that roll, and a boom that raises with a toothed bucket that tips.
AnimatedPublic litter bin (Recycling Centre and Waste Transfer Yard)
Yard litter bin 0.6 m square and 1 m tall: a green tapered body on a charcoal base ring with a steel hoop, a blue waste notice plate and a yellow lid hinged on its back edge that lifts open.
AnimatedBag trolley (Recycling Centre and Waste Transfer Yard)
Public tip trolley for carrying bags from the car: a charcoal tube frame 0.9 m by 0.6 m with steel mesh sides, a yellow push handle, four castors that turn and three tied sacks loaded in it.