Free models · Game-ready GLB
Modular
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
2,263 free GLB models
AnimatedEntrance arch module with gates (Indoor Market Hall and Traders)
The public way in: brick piers on the wall grid carrying a turned stone arch of eleven voussoirs, a blank name panel and a cornice above, and a pair of cast iron gates of vertical bars with spear heads hung on the imposts.
AnimatedService door wall module (Indoor Market Hall and Traders)
The same bay with the traders entrance in it: a stone head over a 1.06 m opening, an iron lining and threshold, and a ribbed steel leaf with a vision panel and a pull handle on a real hinge.
Market hall floor bay (Indoor Market Hall and Traders)
A 2 m square of the hall floor: 50 mm stone flags with a raked jointing grid and a proud edge joint, so a field of bays reads as paving and the stalls and aisles have ground to stand on.
Brick hall wall module (Indoor Market Hall and Traders)
The 4 m by 4 m bay of the hall shell: red stock brick faced on both sides with a stone plinth, a string course and a moulded cornice, and a brick pilaster on each pier so a run reads as a structural bay rather than a flat panel.
Roof truss bay with glazed rooflight (Indoor Market Hall and Traders)
One 4 m bay of the hall roof: a wrought iron truss of tie beam, principal rafters, king post and struts spanning 11.2 m, with purlins, slate sheeting, eaves gutters and a patent glazed ridge rooflight that lights the hall from above.
Cast iron column module (Indoor Market Hall and Traders)
The 4 m cast iron column a market hall roof stands on: a stone pad, a moulded base, a shaft with a shallow entasis, a foliate capital and a square bearing plate, with pierced spandrel brackets in the knee facing along the hall.
Clerestory wall module (Indoor Market Hall and Traders)
The same bay with a cast iron window band over a brick base: a stone cill and head, five mullions and a transom, and a single pane behind them. This is what lights a hall at stall height when the rooflights alone are not enough.
Safety barrier rail, 2 m (Parcel Depot and Sorting Hall)
Yellow impact barrier 2 m long and 1.1 m tall: two charcoal posts on bolted base plates carrying a double rail, with end ports on the centre line so a run guards a walkway or a sorting line for any length.
Mezzanine office deck section, 4 m (Parcel Depot and Sorting Hall)
Mezzanine module 4 m square: a chequer plate deck on charcoal bearers with a yellow edge nosing, a two rail guard along the front edge with blue uprights, and end ports so a run of sections makes an office floor over the sorting hall.
Sorting hall wall module, 4 m (Parcel Depot and Sorting Hall)
Ribbed grey cladding wall 4 m wide, 3.6 m tall and 160 mm thick on a concrete plinth, with a charcoal capping rail, a blue wayfinding band at 2.2 m and side ports on the centre line so a hall encloses itself.
Roller shutter door module, open (Parcel Depot and Sorting Hall)
The same 4 m door bay with the curtain coiled on its barrel in the hood and the opening clear, for a dock a vehicle is backed onto. Identical cladding, guides, impact posts and wall ports.
Marked walkway floor tile, 4 m (Parcel Depot and Sorting Hall)
The same 4 m floor module painted as a pedestrian walkway: a yellow hatched band 1.2 m wide down the middle, a blue walking route square at one end and the same four edge ports, for routing people clear of the forklift lanes.
AnimatedRoller shutter door module, 4 m (Parcel Depot and Sorting Hall)
Vehicle door bay 4 m wide and 4.2 m tall in the same wall grid: a 3.2 m by 3.5 m opening in ribbed cladding, charcoal guide channels, yellow impact posts, a shutter hood and a slatted curtain that lifts clear of the opening.
Sorting hall floor tile, 4 m (Parcel Depot and Sorting Hall)
Power floated concrete hall floor module 4 m square and 120 mm thick with saw cut joints running both ways, a yellow lane line along one edge and edge ports on all four sides, so a hall floor of any size lays out on one grid.
AnimatedParcel scanner arch over a belt (Parcel Depot and Sorting Hall)
Reading tunnel over a powered 2 m belt module: a blue portal 2.1 m tall carrying a six sided camera head, lit reading strips down both jambs, a cable tray along the top and a status screen on a bracket, ported as a standard line module.
AnimatedWeigh and dimension station (Parcel Depot and Sorting Hall)
In line weighing and cubing station on a 2 m belt module: a recessed weigh deck on four load cells, a slim light curtain gantry reading the parcel's height and width, and a pedestal display facing the operator.
AnimatedDiverter arm conveyor unit (Parcel Depot and Sorting Hall)
Powered 2 m belt module with a pivoting diverter arm over it: a grey drive head on the side guide, a yellow banded paddle that sweeps parcels across the belt, and a side port at 0.76 m so a sorting chute lands under the discharge.
AnimatedGravity roller conveyor, 2 m section (Parcel Depot and Sorting Hall)
Unpowered roller bed 2 m long on the same frame, legs and ports as the powered modules: seven galvanised rollers at 0.28 m centres, each turning on its own axis, for a hand fed spur off a sorting line.
AnimatedPowered belt conveyor, 2 m straight (Parcel Depot and Sorting Hall)
Straight powered parcel conveyor module 2 m long and 0.9 m wide with its belt top at 0.76 m: a grey frame on charcoal legs with levelling feet, galvanised side guides and a turning drum at each end. Ports at both ends so a line repeats.
AnimatedPowered belt conveyor, 4 m straight (Parcel Depot and Sorting Hall)
The same powered conveyor at 4 m, for a long run down a sorting hall with fewer joints. Identical width, belt height, legs and end drums, ported on its own half length.
AnimatedIncline belt conveyor, 1.5 m rise (Parcel Depot and Sorting Hall)
Cleated incline conveyor climbing 1.5 m over a 3 m run at 26.6 degrees, feeding a sorting line from a lower infeed. Grey frame, charcoal cleats across the belt, adjustable legs and a turning drum at each end.
Powered belt conveyor, 90 degree curve (Parcel Depot and Sorting Hall)
Quarter turn belt module on a 1 m centre line radius, turning a sorting line 90 degrees to the left. It enters running toward -Z and leaves running toward -X, on the same 0.76 m belt height and the same end ports as the straights.
Teaching Floor Stair Flight with Handrail (University Lecture Hall and Campus)
A 1.4 m wide half flight of eight risers climbing 1.4 m: vinyl treads with marked nosings on closed strings, a landing nib at the top and a tube handrail over a glazed balustrade.
Teaching Floor Tile, Wayfinding Colour (University Lecture Hall and Campus)
The same 2.4 m floor module with the seam border in the wayfinding colour, for marking a route, a threshold or a break-out zone.