Free models · Game-ready GLB
Interior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
5,345 free GLB models
AnimatedTwo boom face drilling jumbo (Underground Mine and Shaft Works)
An articulated two boom face drilling jumbo with named left and right booms carrying feed beams, drill carriages, rods and centralisers, a covered operator platform, a cable reel and a water tank.
AnimatedLoad haul dump loader (Underground Mine and Shaft Works)
An articulated low profile load haul dump loader with a named lift boom, a named toothed bucket, a transverse operator compartment under a canopy and four low profile mine tyres.
AnimatedMine car tipple (Underground Mine and Shaft Works)
A timber framed tipple with an elevated track deck, a named tipping cradle, a receiving bin and a discharge chute.
AnimatedBattery haulage locomotive (Underground Mine and Shaft Works)
A four wheel battery haulage locomotive for 750 mm gauge, with a battery box, a canopied operator bay, controllers, buffers and named wheels.
AnimatedEnd tipping ore cart (Underground Mine and Shaft Works)
An end tipping mine car with a squared box body hinged at the rear sill, on the same four wheel underframe.
AnimatedSide tipping ore cart (Underground Mine and Shaft Works)
A side tipping mine car of about one cubic metre on four flanged wheels, with a named tipping body, drawbars and buffers.
Shaft loading pocket (Underground Mine and Shaft Works)
A steel measuring flask on a braced frame with a lower chute, a hydraulic sector gate and a control cabinet, used to load skips at the shaft bottom.
AnimatedShaft station chamber (Underground Mine and Shaft Works)
An 8 m square shaft station excavated at 5.6 m clear height, with arched drift openings north and south, a 3.6 m by 2.4 m shaft opening through the back, a lined shaft sleeve above with buntons and guides, a steel roof frame and a named landing gate.
AnimatedShaft station cutaway review section (Underground Mine and Shaft Works)
A review variant of the shaft station with the east wall removed so the landing, guides, shaft sleeve and station fittings can be inspected and photographed from the side.
AnimatedBottom dump ore skip (Underground Mine and Shaft Works)
A bottom dump hoisting skip with a stiffened plate body, guide shoes, a suspension bail with rope socket and a named hinged discharge door.
AnimatedShaft man cage (Underground Mine and Shaft Works)
A two deck steel man cage with a mesh enclosure, guide shoes, a suspension bail and rope socket, and two named swing gates on the open front.
Drift incline ramp (Underground Mine and Shaft Works)
An 8 m ramp module climbing 1 m at one in eight between two drift ports, with a shotcrete invert strip, kerb and wall lights.
Drift cutaway review section (Underground Mine and Shaft Works)
A review variant of the straight drift with the east half of the rock shell removed so the arched section, ditch, bolting and services can be inspected from the side.
Drift dead end working face (Underground Mine and Shaft Works)
A 4 m drift module closed by a blasted rock face with a drilled round pattern, a broken muck pile at the toe and a face inspection light. One open drift port.
Widened drift chamber (Underground Mine and Shaft Works)
A 6 m by 8 m widened chamber module for parking, pumping or storage, with arched drift openings at both ends, a heavier steel roof frame and a raised concrete equipment plinth.
Ore pass raise collar (Underground Mine and Shaft Works)
A tipping point over an ore pass raise: a concrete collar around a 2 m square opening, heavy grizzly bars, a kickboard kerb, a side chute and a control stand.
Widened chamber cutaway review section (Underground Mine and Shaft Works)
A review variant of the widened chamber with the east wall removed so the excavated interior, roof frame and equipment plinth can be inspected and photographed from the side.
Left hand drift curve (Underground Mine and Shaft Works)
The mirrored quarter turn drift, running from the north face to the west face on the same 4 m radius grid.
Steel arch set drift section (Underground Mine and Shaft Works)
A 4 m drift section supported by four rolled steel arch ribs on foot plates with steel lagging channels spanning between the ribs and two tie rods.
Right hand drift curve (Underground Mine and Shaft Works)
A quarter turn drift on a 4 m radius grid, running from the north face to the east face with lights on the outer wall and a compressed air line following the curve.
Drift cross junction (Underground Mine and Shaft Works)
A 4 m flat backed four way intersection with arched drift openings on every side, four steel corner columns, a ring beam grid and roof bolts.
Timbered drift set section (Underground Mine and Shaft Works)
A 4 m drift section supported by four three-piece timber square sets with capping plates, angle braces and timber lagging packed against the back.
Straight mine drift 4 m (Underground Mine and Shaft Works)
A 4 m straight hard-rock drift module with a 3.2 m by 3.0 m arched clear section, thick rock shell, drainage ditch, resin rock bolts, a wall cable tray, compressed air and water lines and a bulkhead light.
Drift tee junction (Underground Mine and Shaft Works)
A 4 m flat backed intersection with three arched drift openings and a closed east wall, supported by four steel corner columns, a ring beam and roof bolts.