About
A 1.2 m glazed display case that closes the end of a cash desk run: a plinthed carcass, three glazed faces, a glass mid shelf and a bullnose counter top. Takes small high-value lines beside the till; the glazed faces are framed rather than frameless. Dimensions 1.25 by 1.00 by 0.78 m (X by Y by Z). Metre units, +Y up, customer side toward +Z, resting on y=0. Connectors: counter-left, counter-right (counter-run). Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Glazed cash desk display case (Retail Store Fixtures and Mall)” asset in my project. Model: https://cdn.3dassets.dev/assets/25339/v1/model.glb Asset page: https://3dassets.dev/assets/retail-store-fixtures-and-mall-cash-desk-glazed-displa-283ab5ba Description: A 1.2 m glazed display case that closes the end of a cash desk run: a plinthed carcass, three glazed faces, a glass mid shelf and a bullnose counter top. - Dimensions (X × Y × Z): 1.25 × 0.996 × 0.78 metres - Triangles: 1.8k - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/25339/v1/model.glb', (gltf) => {
scene.add(gltf.scene)
})Common questions
How do I use this model with my AI development tools?
How do I get started?
Which game engines and tools can I use this model with?
How do I import this model into Unity, Godot, Unreal or Blender?
Can I use this model in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Do I need Draco, Meshopt or KTX2 to load it?
Glazed cash desk display case (Retail Store Fixtures and Mall)
A 1.2 m glazed display case that closes the end of a cash desk run: a plinthed carcass, three glazed faces, a glass mid shelf and a bullnose counter top.
More in Props & Furniture
Tripwire Bell (Undercity Sewers and Thieves Den)
Small fictional alarm bell and a visible low cord; supplied as a static prop.
Spike Trap Plate (Undercity Sewers and Thieves Den)
Static fictional trap plate with nine tapered spikes; no mechanism or game logic.
Dog Kennel (Undercity Sewers and Thieves Den)
Open-front timber kennel with a two-slope roof and raised dry floor.
Guard Post (Undercity Sewers and Thieves Den)
Compact watch station with a protected timber front and inspection lantern.
Fake Wall Panel (Undercity Sewers and Thieves Den)
Removable brick-faced concealment panel on rear timber battens.
Jewellery Tray (Undercity Sewers and Thieves Den)
Small wooden display tray carrying two rings and a curved chain.
Coin Sacks (Undercity Sewers and Thieves Den)
Two tied cloth purses with rounded bodies and gathered necks.
Map Of City (Undercity Sewers and Thieves Den)
Flat parchment city diagram with a street grid and one marked district; no real geography.
Den Weapon Rack (Undercity Sewers and Thieves Den)
Timber equipment rack with three original generic blades and leather grips.
Disguise Rack (Undercity Sewers and Thieves Den)
Freestanding costume rail with three hanging garments and broad felt hats.
Wanted Poster Wall (Undercity Sewers and Thieves Den)
Brick wall covered with five blank abstract portrait notices, without names or readable text.
Stew Pot (Undercity Sewers and Thieves Den)
Open cooking pot with a visible stew surface and raised carrying bail.
Similar assets
Partition run end post (Downtown Office Interiors)
A 60 mm partition run end post, 2.6 m tall, closing a glazed run against a wall, with a glazing channel on its left face and three wall fixings.
End display plinth (Retail Store Fixtures and Mall)
A low end-of-run display plinth: a 1.0 by 0.6 m chamfered platform at 0.25 m on a set-back base, for bulk stock or a stepped mannequin group.
Connector cases (Clinic and Veterinary Practice)
Three independent test assemblies proving every connector this pack defines: a counter run on the 600 mm counter-run grid turning through the dispensary corner, a kennel bank run on the 1.35 m bank grid closed by an end panel, and a walk-in dog run tiling on the 1 m run grid...
Bench desk end bay (Downtown Office Interiors)
A 1.8 m single-position bench end bay closed with laminate panel ends, for finishing either end of a bench run; tops at 730 mm, 800 mm deep, with a cable basket and modesty panel.
AnimatedCash desk module 1.2 m (Retail Store Fixtures and Mall)
A 1.2 m cash desk module on the 600 mm counter grid: a chamfered carcass with a timber customer face, a bullnose worktop, a glazed counter guard and a named till drawer.
AnimatedCash desk module 600 mm (Retail Store Fixtures and Mall)
The single-module cash desk at 600 mm: the same carcass, worktop and counter guard, for making up a run to an odd length or closing a short return.
Cash desk corner module (Retail Store Fixtures and Mall)
A 90 degree cash desk corner: a quadrant worktop over two carcass returns on a shared plinth, with the customer face panelling carried around the outside of the turn.
Reception desk end module (Office Lobby and Building Facilities)
A 1.2 m reception desk end module closing a run: the same counter section with a full-height timber return panel and a rounded stainless nose post on the open end.
Bench and Partition Connector Cases (Downtown Office Interiors)
Independent aligned test assemblies proving every connector this pack defines: two bench runs joined bench-right to bench-left, a back-to-back pair joined bench-back to bench-back, a four-position run closed with an end bay, and a glazed partition run from an end post through...
Connector cases (Garden Centre and Florist)
Aligned assemblies proving every connector type in the pack: a glasshouse run of gable, bays and door bay on the 2 m grid, a polytunnel run between two end frames, a canopy walkway run, a gutter and downpipe run at eaves height, a fence run through a gate, a benching run into...
Connector cases (Bar, Pub and Brewery Taproom)
Three independent test assemblies proving every connector this pack defines: a counter run from the lift-flap end through the till position and the corner into a return leg on the 1.2 m counter-run grid, a five bay back bar run on the backbar-run grid, and a stillage run...
Connector cases (Retail Store Fixtures and Mall)
Aligned assembly cases for every connector type in the pack: a 1.35 m shop-bay run through a corner, a 1.2 m shopfront run through a corner post into a mall unit shell, a 600 mm counter run through a cash desk corner, and a mixed panel and gondola run. Each row is an...