Free models · Game-ready GLB
Vehicles
Every modern vehicle below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole vehicles set from the packs.
697 free GLB models
Sailing yacht hull, 9.6 m, navy (Marina and Yacht Club)
Cruising sloop hull 9.6 m long with navy topsides: a moulded deck, a coachroof with hatches and sliding companionway, a teak cockpit sole, guardrails, pulpit and pushpit, and a fin keel with a lead bulb below the waterline.
AnimatedPad Fire Truck (Rocket Launch Pad and Gantry)
An 8 m pad fire truck body: a red cab and locker body with roll up locker faces, a roof water tank and monitor, warning beacons, a cab door that opens and four wheels that roll. No service, brigade or maker mark anywhere.
AnimatedCrew Transfer Van (Rocket Launch Pad and Gantry)
A 6.4 m crew transfer van body: a raised white cabin on a chassis with a roof rack and plant box, blank glazed windows, side steps, a door that opens and four wheels that roll. No livery, badge or operator mark anywhere.
AnimatedNitrogen Purge Cart (Rocket Launch Pad and Gantry)
A four wheel gaseous nitrogen purge cart, 2.6 m long: four bottles in a cabinet frame, a regulator panel with a blank gauge face, two outlet risers on the top deck and a tow handle. All four wheels roll.
Crawler Transporter Deck (Rocket Launch Pad and Gantry)
A 16 by 13 m crawler transporter: a levelling deck on four track units with jacking cylinders, four hold down points, railed edges, hazard striping and two blank operator cabs. Carries a launch mount or a whole vehicle stack.
AnimatedGrid Fin Set (Rocket Launch Pad and Gantry)
A 3 m forward hull section carrying four lattice grid fins stowed flat against it, each a framed grid of vanes on its own hinge fitting. The four fins deploy out to the airstream and fold back, one node each.
AnimatedTransporter Erector (Rocket Launch Pad and Gantry)
A 19 m transporter erector: an eight wheel chassis with a blank cab and a hydraulic pack, carrying a trussed erector beam on a rear hinge with four vehicle cradles and their rollers. The beam raises on its own node and the wheels roll.
Engine Cluster (Rocket Launch Pad and Gantry)
A seven engine cluster on its thrust structure: a ring beam on four posts with a cross brace, one centre bell and six round it on gimbal blocks, each with a turbopump box and propellant feed stubs. 3.7 m across, 3.4 m tall.
AnimatedLanding Leg Set (Rocket Launch Pad and Gantry)
A 4.3 m aft hull section with four landing legs stowed against it: each leg is a main strut with two side stays and a round foot pad, hinged at its own base fitting, and each deploys down and out on its own node.
AnimatedPayload Fairing Halves (Rocket Launch Pad and Gantry)
A two piece payload fairing, 7.4 m tall and 3.5 m across: an ogive shell with a modelled wall thickness, a longeron each side of the split line, internal stiffening hoops and a blank access panel. Each half hinges open outwards on its own node at the base of the split line.
Second Stage (Rocket Launch Pad and Gantry)
A 12.3 m second stage: a 3.3 m tank on a conical adapter down to the core diameter, one vacuum engine bell on its thrust block, a raceway, four attitude thruster pods and a payload interface ring on top.
Interstage (Rocket Launch Pad and Gantry)
A 3.6 m interstage barrel joining the two stages: the same 3.8 m hull, a reinforcing ring at each end, eight separation vent ports, a raceway continuation and an invented marking band.
First Stage Core (Rocket Launch Pad and Gantry)
A 24 m first stage core, 3.8 m across: a white tank barrel with a dividing ring, an aft skirt on eight thrust posts, a cable raceway with junction boxes up one flank, an umbilical plate and invented block markings. Ported base and top.
AnimatedTrack Bicycle on a Work Stand (Velodrome and Track Cycling)
The track bicycle held clear of the floor in an A frame rear wheel stand, which is how it sits for a gear change or a wash. Both wheels are named nodes and spin freely. Riderless, and the chain is one solid strip that does not move.
AnimatedTrack Bicycle (Leaned) (Velodrome and Track Cycling)
The same track bicycle tipped 15 degrees onto its side, as it stands leaned against a rail or a barrier. The wheels are still named nodes and still roll. Riderless, and the chain is one solid strip that does not move.
AnimatedTrack Bicycle (Upright) (Velodrome and Track Cycling)
A fixed gear track bicycle standing upright on both wheels: steel frame, drop bars, one chainring and no brakes. Both wheels are named nodes on their own axles. Riderless, and the chain is one solid strip that does not move.
Yard work boat (Shipyard and Dry Dock)
A 9 m open work boat for running lines and crew round a basin: a lofted hull with a red underbody, a low bulwark, a centre console with a windscreen, a bench seat, a bow roller and a fendered rubbing strake.
Slipway launch cradle (Shipyard and Dry Dock)
A welded launch cradle 6 m long on four grooved slipway wheels: a keel beam with timber packing, four adjustable side arms with pivoting pads, a towing eye at each end and a hand winch tie.
Harbour tug (Shipyard and Dry Dock)
A 22 m harbour tug: a full lofted hull in antifouling red below the waterline and grey above, a deckhouse with a raised wheelhouse, a funnel, a mast, a towing hook aft and heavy tyre fendering all round.
AnimatedCrawler crane with lattice boom (Shipyard and Dry Dock)
Tracked lattice boom crane for yard lifts: twin crawler tracks on a carbody, a slewing upper with counterweight, operator cab and winch drums, and a 14 m lattice boom raked over the front. The upper slews and the hook hoists with it.
AnimatedPillar jib crane, 7 m reach (Shipyard and Dry Dock)
Bolted down pillar jib crane 8.6 m tall with a 7 m tie braced jib, a slew ring at the column head, an electric hoist on the jib and a hook block under it. The jib slews through a full circle and the hook hoists with it.
AnimatedOverhead travelling crane, 8 m span (Shipyard and Dry Dock)
Single girder underslung overhead crane for a fabrication shed: a box bridge hung from two end carriages on rail mounted wheels, a crab with its gearbox and drum, and a hook block under it. The crab traverses the bridge and the hook hoists with it.
AnimatedDock gantry crane, 24 m span (Shipyard and Dry Dock)
Rail mounted portal gantry spanning a graving dock: braced A legs on four wheel bogies, twin box girders 14 m up with a walkway, a machinery house and a crab whose hook block hangs between the girders. The crab traverses and the hook hoists.
AnimatedBow thruster tunnel unit (Shipyard and Dry Dock)
A 2.2 m bore thruster tunnel section on a transport stillage, ready to be let into a bow: plated tunnel with flanged ends, a grid over each mouth, the impeller and its gear leg inside, and lifting eyes on the frame.