Free models · Game-ready GLB
Roads infrastructure
Every roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
1,134 free GLB models
Dock bumper pair (Self Storage Facility and Loading Bay)
A pair of laminated rubber dock bumpers on bolted steel backplates at 1.5 m centres, each five rubber pads deep with a yellow wear band across the top, for the face of a loading dock.
Loading bay dock with leveller plate (Self Storage Facility and Loading Bay)
Ground level loading dock 4 m wide and 2.6 m deep at 1.15 m: a concrete platform with a yellow edge line, a steel dock leveller plate and its lip reaching out over the tail of a van, a scuff kerb and four cast steps with a charcoal handrail at one end.
Marked parking bay ground tile, 3 m (Self Storage Facility and Loading Bay)
The same 3 m yard module painted as a customer parking bay: a yellow bay outline standing 5 mm proud of the slab, a charcoal wheel stop bolted across the head of the bay and the same four edge ports.
Storage corridor floor tile, 3 m (Self Storage Facility and Loading Bay)
Power floated concrete corridor module 3 m square and 120 mm thick, with a yellow keep clear stripe down each side of the walkway, a recessed saw cut joint and edge ports on all four sides.
Site yard ground tile, 3 m (Self Storage Facility and Loading Bay)
External concrete yard module 3 m square and 120 mm thick with saw cut joints running each way and a galvanised slot drain along one edge, laying into the same grid as the corridor floor.
Studio Floor Tile Dark (Tattoo and Piercing Studio)
The studio floor tile in near black with a teal inlay, for the booth half of a floor where the clinical grey would read as a corridor.
Studio Floor Tile (Tattoo and Piercing Studio)
A 2 m square of welded studio vinyl: a grey field with the welded seam grid and a magenta route inlay along one edge, the tile every room in this pack stands on.
Clinical Floor Tile (Dental Practice and Surgery)
A 2 m square of welded clinical vinyl: a grey field with the welded seam grid and a coloured route inlay along one edge, the tile every room in this pack stands on.
Clinical Floor Tile Blue (Dental Practice and Surgery)
The clinical floor tile in blue with a white inlay, for the waiting and reception half of a practice where the clinical grey would read as a corridor.
Spectator Fence Section (Go Kart Track and Pit Lane)
Four metre spectator mesh fence 1.85 m high: a welded panel between two steel posts with yellow top and kick rails. Start and end fence ports, so a run closes a viewing line without a gap at the joins.
Paddock Apron Tile (Go Kart Track and Pit Lane)
Plain poured concrete apron on the same 8 m ground module, its slab scored into four bays by expansion joints. The unmarked companion to the pit lane tile, for paddock, garage forecourt and parking ground. Four ground ports.
Pit Lane Tile (Go Kart Track and Pit Lane)
Pit lane surface on the 8 m ground module: a concrete slab with a red boundary line on the track side, a yellow fast lane line down it and one working bay boxed out in white against the garage side. Four ground ports.
Flag Post and Marshal Post (Go Kart Track and Pit Lane)
Marshal post: a raised 2.4 m concrete stand with a yellow double rail on three sides, an extinguisher on the deck, and a 3.1 m flag post beside it carrying a yellow and a red flag panel. The flags are modelled as rigid panels and do not move.
Timing Loop Strip (Go Kart Track and Pit Lane)
Transponder timing loop laid across an 8 m corridor: a bonded charcoal strip with a yellow marker tape each side and a small roadside reader box on the verge. Sits on the tarmac, so it drops on a straight wherever a split is taken.
Barrier Board with Advertising (Go Kart Track and Pit Lane)
Four metre advertising hoarding for the outside of a barrier: a blue board 0.9 m high on two steel posts with back stays, blocked out in yellow and red, and a dark capping rail. Panels are invented blocks of colour and carry no wording or logo.
Tyre Wall Barrier Corner (Go Kart Track and Pit Lane)
The tyre wall turned through ninety degrees: two 2 m arms of three courses meeting at a knuckle tyre, with the yellow strap board carried round both faces and a steel post at each open end. Barrier ports on both arms.
AnimatedStart Finish Gantry (Go Kart Track and Pit Lane)
Start and finish gantry spanning a 10 m corridor on two 4.5 m steel legs with concrete pad footings: a braced box beam, a red and yellow banner panel and a five lamp start light panel hung below it that tilts on its own pivot.
Kerb Section Red and White (Go Kart Track and Pit Lane)
Four metre apex kerb, 0.5 m wide, rising from 50 mm at the track edge to 85 mm at its back lip, in white concrete with four red bands laid proud of the slope. Start and end kerb ports, so a run follows a corner in 4 m steps.
Tyre Wall Barrier Section (Go Kart Track and Pit Lane)
Four metre tyre wall: three courses of six bolted tyres 0.66 m high with red and blue marker tyres banded through them, a steel end post each end and a yellow strap board along the track face. Start and end barrier ports.
Run Off Gravel Tile (Go Kart Track and Pit Lane)
Gravel trap tile on the 8 m ground module: a raked pea gravel bed with a scatter of larger stones, for the run off behind a tyre wall. Four ground ports, so it lays flush against tarmac, pit concrete and its own neighbours.
Grid Box Marking Tile (Go Kart Track and Pit Lane)
Start grid tile: the same 8 m tarmac module with a white start line across it and six staggered grid boxes painted in two rows, the spacing a kart grid uses. Four ground ports, so it drops into a straight in place of a plain tile.
Track Surface Tile Straight (Go Kart Track and Pit Lane)
Straight 8 m tarmac circuit tile on a 0.12 m slab, with a white edge line down each side of the 8 m racing corridor. Four ground ports, one per edge, so straights, corners and pit tiles lay as one continuous surface.
Track Surface Tile Curve (Go Kart Track and Pit Lane)
Ninety degree corner tile on the same 8 m module: the corridor enters the west edge and leaves the south edge, the outer edge is lined in white and the apex arc is dotted round the inside. Four ground ports, one per edge.
Queue Rail Section (Street Food Market and Food Trucks)
A 2 m bay of queue barrier: two posts on footplates set in from the ends, a steel top rail, a red middle rail and three infill bars. Bays butt end to end into a queue line of any length, with end ports on both ends.