Free models · Game-ready GLB
Roads infrastructure
Every modern roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
727 free GLB models
Tipping bay wall block, 2 m (Recycling Centre and Waste Transfer Yard)
Precast concrete barrier block 2 m long and 0.9 m tall for the edge of a tipping bay: a tapered body on a wide foot, a yellow high visibility band along the top and a charcoal impact kerb, with end ports so a run repeats.
Recycling yard ground tile, 4 m (Recycling Centre and Waste Transfer Yard)
Heavy duty concrete yard module 4 m square and 100 mm thick with saw cut joints running each way, laid so its top face is the running surface, with edge ports on all four sides so a whole transfer yard repeats from it.
Marked queue lane ground tile, 4 m (Recycling Centre and Waste Transfer Yard)
The same 4 m yard module painted as a queue lane to the weighbridge: two yellow lane lines standing 6 mm proud of the slab, a directional arrow between them and a charcoal hold line across the head of the tile.
Mud tracked yard tile, 4 m (Recycling Centre and Waste Transfer Yard)
The same 4 m yard module with dried mud trodden across it: three spread patches standing a few millimetres proud of the slab and two wheel ruts run through them, for the bay mouths and the loader's working line.
Safety barrier rail, 2 m (Parcel Depot and Sorting Hall)
Yellow impact barrier 2 m long and 1.1 m tall: two charcoal posts on bolted base plates carrying a double rail, with end ports on the centre line so a run guards a walkway or a sorting line for any length.
Marked walkway floor tile, 4 m (Parcel Depot and Sorting Hall)
The same 4 m floor module painted as a pedestrian walkway: a yellow hatched band 1.2 m wide down the middle, a blue walking route square at one end and the same four edge ports, for routing people clear of the forklift lanes.
Sorting hall floor tile, 4 m (Parcel Depot and Sorting Hall)
Power floated concrete hall floor module 4 m square and 120 mm thick with saw cut joints running both ways, a yellow lane line along one edge and edge ports on all four sides, so a hall floor of any size lays out on one grid.
Dock bumper pair (Parcel Depot and Sorting Hall)
The pair of laminated rubber buffers a trailer backs onto, 1.9 m apart on their galvanised mounting plates, with charcoal blocks, bolt heads and a yellow wear stripe across each face.
Dock leveller plate (Parcel Depot and Sorting Hall)
Dock leveller set into the apron: a 2.2 m by 2.4 m chequer plate deck in a charcoal pit frame with a hinged front lip, yellow chevron edging down both sides and a control box on a short post.
AnimatedParcel scanner arch over a belt (Parcel Depot and Sorting Hall)
Reading tunnel over a powered 2 m belt module: a blue portal 2.1 m tall carrying a six sided camera head, lit reading strips down both jambs, a cable tray along the top and a status screen on a bracket, ported as a standard line module.
AnimatedWeigh and dimension station (Parcel Depot and Sorting Hall)
In line weighing and cubing station on a 2 m belt module: a recessed weigh deck on four load cells, a slim light curtain gantry reading the parcel's height and width, and a pedestal display facing the operator.
AnimatedDiverter arm conveyor unit (Parcel Depot and Sorting Hall)
Powered 2 m belt module with a pivoting diverter arm over it: a grey drive head on the side guide, a yellow banded paddle that sweeps parcels across the belt, and a side port at 0.76 m so a sorting chute lands under the discharge.
AnimatedGravity roller conveyor, 2 m section (Parcel Depot and Sorting Hall)
Unpowered roller bed 2 m long on the same frame, legs and ports as the powered modules: seven galvanised rollers at 0.28 m centres, each turning on its own axis, for a hand fed spur off a sorting line.
AnimatedPowered belt conveyor, 2 m straight (Parcel Depot and Sorting Hall)
Straight powered parcel conveyor module 2 m long and 0.9 m wide with its belt top at 0.76 m: a grey frame on charcoal legs with levelling feet, galvanised side guides and a turning drum at each end. Ports at both ends so a line repeats.
AnimatedPowered belt conveyor, 4 m straight (Parcel Depot and Sorting Hall)
The same powered conveyor at 4 m, for a long run down a sorting hall with fewer joints. Identical width, belt height, legs and end drums, ported on its own half length.
AnimatedIncline belt conveyor, 1.5 m rise (Parcel Depot and Sorting Hall)
Cleated incline conveyor climbing 1.5 m over a 3 m run at 26.6 degrees, feeding a sorting line from a lower infeed. Grey frame, charcoal cleats across the belt, adjustable legs and a turning drum at each end.
Powered belt conveyor, 90 degree curve (Parcel Depot and Sorting Hall)
Quarter turn belt module on a 1 m centre line radius, turning a sorting line 90 degrees to the left. It enters running toward -Z and leaves running toward -X, on the same 0.76 m belt height and the same end ports as the straights.
Accessible Space Marking Tile (University Lecture Hall and Campus)
A 1.2 m painted floor marking tile for a wheelchair space: a blue painted field with a border and a raised white pictogram, 24 mm proud of the floor.
Site floodlight mast, 5.6 m (Self Storage Facility and Loading Bay)
Yard lighting column 5.6 m tall: a tapered charcoal mast on a bolted base plate over a concrete pad, an orange inspection collar with a blank plate, and a head frame carrying three floodlights with cream lenses tilted down over the yard.
Site mesh fence panel, 3 m (Self Storage Facility and Loading Bay)
Welded mesh security fence module 3 m wide and 2.1 m tall: galvanised mesh in a charcoal frame between two posts on precast concrete feet, with an orange site notice plate bolted to one post and side ports on the centre line.
Site mesh fence gate, 3 m, standing open (Self Storage Facility and Loading Bay)
The same 3 m fence module built as a vehicle gate with its leaf swung back against the run: a hinge post, a latch post with a keep and a drop bolt socket, and the mesh leaf standing open across 77 degrees, so a drive reads as open in a scene.
AnimatedEntrance barrier with lifting arm (Self Storage Facility and Loading Bay)
Site entrance barrier: a charcoal cabinet on a bolted base with an orange access door and a blank plate, and a 3 m cream arm banded in orange with a red end reflector, tilting up clear of the drive.
Dock bumper pair (Self Storage Facility and Loading Bay)
A pair of laminated rubber dock bumpers on bolted steel backplates at 1.5 m centres, each five rubber pads deep with a yellow wear band across the top, for the face of a loading dock.
Loading bay dock with leveller plate (Self Storage Facility and Loading Bay)
Ground level loading dock 4 m wide and 2.6 m deep at 1.15 m: a concrete platform with a yellow edge line, a steel dock leveller plate and its lip reaching out over the tail of a van, a scuff kerb and four cast steps with a charcoal handrail at one end.