Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,782 free GLB models
Galley unit (Offshore Oil Rig and Platform)
A galley run for a living quarters module: a base cabinet run with three doors under a stainless worktop, a four burner hob with an extractor hood, a sink with a mixer, a tall fridge and a shelf of provisions. The doors open.
Switchgear room rack (Offshore Oil Rig and Platform)
A four cubicle switchgear rack for a control or electrical module: a plinth mounted lineup with hinged doors, blank mimic panels and blank instrument plates, capped by a cable trunking top. The doors open.
Fresh water maker skid (Offshore Oil Rig and Platform)
A reverse osmosis fresh water maker on a skid: three membrane pressure vessels in a rack with their end closures, a high pressure feed pump, the product line with its valve and a blank control panel. The handwheel turns.
Seawater lift pump skid (Offshore Oil Rig and Platform)
A seawater lift pump on its caisson head: the flanged caisson, the pump head and column, the motor with its cooling cap, a discharge line with a gate valve and a blank local panel. The handwheel turns.
Valve manifold skid (Offshore Oil Rig and Platform)
A four branch valve manifold on a bunded skid: a flanged header feeding four gate valves up to an overhead line, with a drip tray, support posts and a blank gauge board. The handwheels turn.
Packaged generator set (Offshore Oil Rig and Platform)
A packaged diesel generator set: an acoustic enclosure on a skid with louvred intakes, a radiator and fan at one end, a lagged exhaust stack, a hinged access door and a blank control panel. The fan turns and the door opens.
Diesel storage tank (Offshore Oil Rig and Platform)
A 6 m horizontal diesel storage tank on two saddles: dished ends, a grated top walkway with handrails, a ladder, a bolted manway, a blank level gauge on the end and a drain valve. The valve handwheel turns.
Wellhead and christmas tree (Offshore Oil Rig and Platform)
A wellhead with its christmas tree: the conductor and casing head on a base plate, the tubing head spool, master and swab valves and two wing valves on the flow cross, with a blank identification plate. The handwheels turn.
Blowout preventer stack (Offshore Oil Rig and Platform)
A blowout preventer stack on its support frame: the wellhead connector, two ram preventer bodies with their side operating cylinders, the annular preventer on top and the choke and kill outlets with their valves. The handwheels turn.
Cement unit (Offshore Oil Rig and Platform)
A skid mounted cementing unit: two conical batch mixing tanks with their charging lines, a triplex cementing pump with its flywheel, the high pressure discharge line and a blank instrument cabin. The flywheel turns.
Linear motion shale shaker (Offshore Oil Rig and Platform)
A linear motion shale shaker: the possum belly feed box, an inclined screen deck in its basket with the vibrator motor on top, the cuttings discharge and a blank control box. The deck shakes.
Active mud tank, agitated (Offshore Oil Rig and Platform)
The same mud tank with two mechanical agitators mounted through the top walkway, their gearboxes and shafts standing over the manways. The shafts turn.
Active mud tank (Offshore Oil Rig and Platform)
A 6 m active mud tank: a baffled steel tank on a skid with external stiffeners, a grated top walkway with handrails, two bolted manways, a suction line and a blank gauge board on the end.
Triplex mud pump (Offshore Oil Rig and Platform)
A triplex mud pump on its skid: the power end with its flywheel, the fluid end with three modules and their discharge caps, a pulsation dampener, the suction manifold and a blank local panel. The flywheel turns.
Setback pipe rack with stands (Offshore Oil Rig and Platform)
The setback: fourteen 8.6 m stands of drill pipe standing in a fingerboard rack, held at two levels by hazard painted fingers on a base plate. Stands the way they are racked back on a drill floor between runs.
Drill pipe bundle on trestles (Offshore Oil Rig and Platform)
Twelve joints of drill pipe with upset tool joints racked horizontally in three tiers on two stop ended trestles, ready to be picked up off the pipe deck.
Drawworks (Offshore Oil Rig and Platform)
The hoisting drawworks on its skid: a grooved drum between two brake flanges in a painted frame, the drive housing, the auxiliary brake and the driller control stand with a blank screen. The drum turns.
Derrick crown block (Offshore Oil Rig and Platform)
The crown block that caps a derrick: a short lattice bay carrying a five sheave cluster on its shaft between two support beams, a grated crown platform and a blank obstruction light. The sheave cluster turns.
Travelling block and hook (Offshore Oil Rig and Platform)
The travelling block with its link and hook, standing on its guide frame: the block hoists up its guide and the hook safety latch swings clear. Landed at the well centre the way a block is left between runs.
Ships Rudder (Sunken City and Underwater Ruins)
Ship rudder 2.5 m tall leaning where it fell, its three pintles and gudgeon straps still on the leading edge.
Mast Stump (Sunken City and Underwater Ruins)
Broken lower mast 3.1 m tall in its silt mound, an iron band round the heel, a cross spar still shipped and the head splintered.
Wreck Rib Set (Sunken City and Underwater Ruins)
Five broken hull frames standing out of a silt mound 4 m across, leaning apart as the ship settled, with coral on the low ends.
Shipwreck Hull Section (Sunken City and Underwater Ruins)
Section of a wooden hull about 8.6 m long lying over on the seabed, keel and nine frames intact, one side still planked and the other stripped.
Cargo Crate Waterlogged (Sunken City and Underwater Ruins)
Waterlogged cargo crate 1 m square with sprung boards, an iron banded frame, the lid slipped off and weed on the corner.