Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,517 free GLB models
Battery Bank (Submarine Interior and Control Room)
A tanked battery bank 2.4 by 1.0 m: a coamed tray holding twelve cells in two rows with vent caps and brass links, a vent trunk with two risers over them, a grating lid to walk on, two meters on the outboard face and an amber warning strip. Static geometry.
AnimatedElectric Motor and Shaft Coupling (Submarine Interior and Control Room)
A 1.4 m ribbed main motor on a bedframe with a terminal box, brush covers and a blank builder's plate, and 1.6 m of tail shaft aft of it through a bearing pedestal and a stuffing box.
Diesel Engine Block (Submarine Interior and Control Room)
A 3.2 m six cylinder diesel: a bedplate on resilient mounts, a crankcase and block, six heads with rocker covers, an exhaust manifold down one flank and a charge air trunk down the other, a blower forward and a flywheel housing aft.
Life Ring on Bracket (Submarine Interior and Control Room)
A 780 mm life ring on a two arm bulkhead bracket, banded in four sectors with a grab line looped round it. Static geometry, and it carries no boat name, port or marking.
AnimatedFolding Step (Submarine Interior and Control Room)
A bulkhead folding step 600 mm wide: a gripped tread on two stays, modelled down and folding flat against its plate on the step node, with a grab rail over it.
Stores Crate, Small (Submarine Interior and Control Room)
The same ironbound timber crate at 0.52 by 0.38 m, for stacking on the larger one or stowing under a bench.
Stores Crate (Submarine Interior and Control Room)
A 0.8 by 0.56 m timber stores crate 540 mm tall with corner irons, top and bottom cleats, two lashing eyes and a plain coloured label strip. Static geometry, and nothing on it is lettered.
AnimatedStores Locker (Submarine Interior and Control Room)
A 920 mm two door stores locker 1.94 m tall with a plinth, a capping rail, drop handles and a plain coloured label strip on each door. Both doors swing on the door-1 and door-2 nodes. The labels are colour only, so nothing is named.
AnimatedStores Locker, Low (Submarine Interior and Control Room)
The same two door stores locker at 920 mm, which is what goes under a bunk run or against a bulkhead where a tall one would not clear the deckhead. Both doors swing on the door-1 and door-2 nodes.
AnimatedFire Hose Reel (Submarine Interior and Control Room)
A 680 mm swinging arm hose reel on a bulkhead plate: a red drum with five turns of hose wound on it turning about Z on the reel node, a nozzle on its clip and a supply valve on the wheel-hose node.
Fire Extinguisher on Bracket (Submarine Interior and Control Room)
A 550 mm extinguisher in two bracket bands on a bulkhead plate, with a squeeze handle, a pressure dial and its horn hose hanging where it hangs. No wording or maker appears on the body.
AnimatedEmergency Breathing Apparatus Station (Submarine Interior and Control Room)
A 1.2 m breathing station: four masks on hooks over a charging manifold with four connection valves on the wheel-eba-1 to wheel-eba-4 nodes, and an amber warning strip along the top.
AnimatedFirst Aid Locker (Submarine Interior and Control Room)
A 560 mm bulkhead first aid locker with a single door on the door node, marked with a plain raised red cross. No wording, service or maker appears on it.
Coffee Urn (Submarine Interior and Control Room)
A 600 mm stainless coffee urn on a rubber mat: a brass lid, a tap over a drip tray, a sight glass and two carrying handles. Static geometry.
Wardroom Table (Submarine Interior and Control Room)
A 1.7 by 0.82 m wardroom table on a single bolted pedestal with a foot rail: a timber top inside a brass fiddle rail, a crumb tray underneath and a condiment fiddle at one end.
AnimatedGalley Sink Unit (Submarine Interior and Control Room)
A 1.1 m stainless sink unit with two pressed bowls, a swan neck mixer and a cupboard under it closed by two doors on the door-1 and door-2 nodes.
AnimatedWardroom Bench (Submarine Interior and Control Room)
A 1.7 m bench seat that is also a locker: a timber carcass with a padded lid hinged on its after edge on the hatch node, a raked back pad on two brackets and a brass grab rail along the top.
AnimatedGalley Range (Submarine Interior and Control Room)
A 920 mm galley range: a four ring hob inside a brass sea fiddle, an oven with a glazed drop door on the door-oven node, four control knobs and a pilot lamp. Nothing on it is lettered, so no maker is named.
Bunk Stack with Curtains (Submarine Interior and Control Room)
A three tier bunk stack 1.96 m long and 2.2 m tall: corner posts, steel pans with crowned mattresses, pillows, fiddle rails, stowage nets under each pan, reading lamps at the heads, and curtain rails with the curtains gathered back at both ends of every berth.
AnimatedCompressed Air Bottle Rack (Submarine Interior and Control Room)
A framed rack of six compressed air bottles lying in two rows of three, 1.9 m long and 1.3 m tall: end plates, four rails, bottle valves with 140 mm handwheels on the wheel-bottle-1 to wheel-bottle-6 nodes, a riser and cross pipe manifold, and webbing straps over the top row.
Deckhead Light, Rigged for Red (Submarine Interior and Control Room)
The same caged bulkhead lamp with a red lens in it, which is what a control room is lit by when the watch has to keep its night vision. Use it to light a compartment red without changing the fitting.
Sound Powered Telephone (Submarine Interior and Control Room)
A bulkhead telephone 260 mm wide: a handset on its cradle, a brass selector and a red call push, with the lead modelled in the position it hangs. The lead is static, because a flexible cord is not reachable with one rigid node transform.
Deckhead Light Fitting (Submarine Interior and Control Room)
A caged bulkhead lamp on a swan neck bracket, 300 mm deep: a spun reflector, a clear lens and a six bar guard over it. Static geometry; the light itself is the scene's, not the model's.
Klaxon with Alarm Push (Submarine Interior and Control Room)
A twin trumpet klaxon on a bulkhead bracket 280 mm wide, with a red alarm push under the smaller horn. It is static: the diaphragm inside a horn is not something a rigid node transform reaches.