Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,782 free GLB models
Turbo Trainer (Velodrome and Track Cycling)
A direct drive turbo trainer standing empty: splayed charcoal feet, a resistance unit body with a red cover and a steel drive drum that is a named node and spins. No bicycle is fitted, so it can be paired with any of the three bicycles.
Warm Up Roller Set (Velodrome and Track Cycling)
A three drum roller set for warming up on: a low charcoal frame, two rear drums and one front drum on steel rails, with the belt between them modelled as a solid strip. Each drum is a named node on its own axle and spins. 1.5 m long.
Track Centre Bench Run (Velodrome and Track Cycling)
Three 3 m benches in a row for the track centre, timber slats on steel frames with low backs, 4.8 m of seating end to end. Empty, like everything else in this pack.
Race Timing Desk (Velodrome and Track Cycling)
The commissaires and timing desk: a 2.6 m table with a lower shelf and a blue modesty panel, two flat screens lying face up on it and two equipment cases pushed underneath. The screens are blank charcoal panels.
Presentation Podium (Velodrome and Track Cycling)
A three step presentation podium 3.2 m across, in white and grey concrete with blue treads and a front kick rail. Empty: there are no people or trophies in this pack.
Ceiling Light Rig (Velodrome and Track Cycling)
A suspended lighting bar for the hall roof: a 4.4 m lattice truss with two drop rods above it and four downlight cans under it. The origin is free, at the centre of the truss, because it hangs rather than stands; the rods reach 0.9 m above it.
Flood Light Truss (Velodrome and Track Cycling)
A free standing lighting mast: two ballasted A frames carrying a 5.2 m lattice truss at 6 m with four flood heads on it, faces down. The lamp faces are plain white panels and no light is emitted.
Cone Set (Velodrome and Track Cycling)
Five 0.47 m marker cones on square bases, in yellow with a white reflective band, scattered as a set for closing a lane of the apron or marking a warm up area.
Crowd Barrier Set (Velodrome and Track Cycling)
A 2.4 m linked crowd barrier with splayed feet, a top rail at 1.05 m and six uprights, in bare steel. Ports at both ends so a run of them closes off an entrance or a working area.
Banner Rail Run (Velodrome and Track Cycling)
A 4 m bay of the trackside banner rail: two posts, a top rail and a blank white panel with a yellow edge band. The panel carries no wording or logo of any kind. Ports at both ends so the rail runs the length of a straight.
Scoreboard Frame (Velodrome and Track Cycling)
A trackside scoreboard: a 4.2 by 1.7 m frame on two posts with a blank white face and a red header band. Nothing is written on it, so a project can letter or texture the face as it likes.
Big Screen Frame (Velodrome and Track Cycling)
The arena big screen: a 6.4 by 3.6 m charcoal frame on two steel legs, 8 m to the top. The face is deliberately blank, a plain dark panel for a project to map its own video or texture onto.
Lap Board and Stand (Velodrome and Track Cycling)
The laps to go board on its stand: a two post frame with a blank white card and a hinged charcoal leaf over it that flips on the head rail. The number face is a plain white block, so a project can letter it however it likes.
Photo Finish Rig (Velodrome and Track Cycling)
The photo finish camera on its tripod: three splayed steel legs, a pan head and a charcoal body with a lens barrel and a yellow control box, 1.8 m to the lens. Static, because the head is a linkage rather than a single rigid joint.
Bell on a Stand (Velodrome and Track Cycling)
The bell rung for the last lap, hung from a two post stand 1.6 m up: a brass coloured bell with a clapper ball, on a named node at the head rail so the whole bell rocks. The stand is ballasted and the bell is struck by hand, so nothing else moves.
Start Light Tree (Velodrome and Track Cycling)
The three lamp start light tree used for timed starts: a ballasted mast 2.6 m tall with a charcoal head carrying red, amber and green lenses facing the track. The lenses are plain coloured discs and emit no light.
Starting Gate with Holder Frame (Velodrome and Track Cycling)
The wheeled frame that holds a bicycle upright for a standing start: a ballasted base on castors, two uprights and a head rail, with a hinged holder arm that lifts clear to release. The arm is a named node on the head rail pivot.
Track Side Fence Run (Velodrome and Track Cycling)
A 4 m bay of the 2.2 m fence that closes the back of the track apron: two footed posts, three steel rails and eleven charcoal uprights. Ports at both ends so it runs round the inside of the arena.
Infield Safety Rail Run (Velodrome and Track Cycling)
A 4 m bay of the tubular rail that separates the track centre from the apron: three footed posts with a top rail at 1 m and a mid rail, in steel. Ports at both ends, so bays run round the whole infield.
Track Surface Board Panel (Velodrome and Track Cycling)
A spare panel of track decking, 2.4 by 1.2 m of pale pine boards on two steel bearers, for laying flat in the track centre as a repair stack or a working platform. Six raised boards read as the plank courses of the running surface.
Muster point board, blank (Shipyard and Dry Dock)
A free standing yard notice board on two posts with a blank white face and a blank header panel above it, for a project to letter its own muster instructions and permit notices onto.
Yard fire point (Shipyard and Dry Dock)
A red fire point stand with two extinguishers on a shaped rack, a call point, a blank instruction board above them and a sand bucket on a hook, for the dock side of a working shipyard.
Emergency eyewash and shower (Shipyard and Dry Dock)
A plumbed emergency shower and eyewash station on a green backed stand: an overhead rose on a pull rod, a bowl with two spray heads, a foot treadle, a blank instruction sign and a floor drain grating.
Quay mooring bollard with rope (Shipyard and Dry Dock)
A cast steel kidney bollard 0.9 m tall on a bolted base plate, with a cream mooring rope dressed over it in a loose eye and run off toward the water, for the quay edge outside a dock gate.