Free models · Game-ready GLB
Props
Every realistic prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
7,523 free GLB models
Cocktail station insert (Bar, Pub and Brewery Taproom)
A 900 mm cocktail station: a stainless deck with a deep ice well aperture, a divided garnish tray, a hung speed rail on the customer side, a glass rinser and a cutting board.
AnimatedUnder-bar waste chute (Bar, Pub and Brewery Taproom)
A waste chute station: a deck plate aperture with a hinged flap, a tapered stainless throat and a lined bin below on a leg frame.
Under-bar bottle step (Bar, Pub and Brewery Taproom)
A 700 mm three tier stainless bottle step: stepped shelves with lipped fronts on folded end cheeks, on a slotted base tray.
Two tier speed rail (Bar, Pub and Brewery Taproom)
A 620 mm two tier bottle speed rail: folded stainless channels with lipped fronts on stepped brackets and a clamp plate that hooks over the bar front.
AnimatedUnder-bar ice well (Bar, Pub and Brewery Taproom)
A 560 mm insulated ice well on a stainless leg frame: a deck plate with a real aperture, a deep pressed pan with bottle dividers standing in it, an undershelf and a hinged insulated lid with a lift handle.
AnimatedUndercounter keg fridge (Bar, Pub and Brewery Taproom)
A 620 mm undercounter keg fridge: an insulated solid door on barrel hinges, a thermostat fascia, a font mounting boss and a lagged python gland rising from the top deck.
AnimatedUndercounter bottle fridge (Bar, Pub and Brewery Taproom)
A 920 mm undercounter bottle fridge: two glazed doors on barrel hinges with full-height bar handles, three lipped wire shelves inside and a louvred condenser grille under the top deck.
Condiment and garnish rail (Bar, Pub and Brewery Taproom)
A counter-mounted garnish rail: a stainless frame with four divided openings, four tapered garnish pots with rolled rims and a pair of clamp brackets under the bar top.
AnimatedUndercounter glass washer (Bar, Pub and Brewery Taproom)
A 460 mm undercounter glass washer: a chamfered stainless case on adjustable bullet feet with a recessed kick, a drop-front door with a round inspection port and grab handle, and a recessed control fascia with dials and indicator lamps.
Bar drip tray run (Bar, Pub and Brewery Taproom)
A 620 mm stainless drip tray: a pressed pan with a rolled flange, a removable slatted grid, a glass rinse jet and a waste spigot underneath.
Bar canopy with glass rack (Bar, Pub and Brewery Taproom)
An overhead bar canopy: five lipped stemware rails and a brass downlight strip under a boxed timber soffit with a moulded cornice, carried on four drop rods with domed ceiling plates.
Bar top section with bullnose (Bar, Pub and Brewery Taproom)
A loose 1.2 m bar top section: a postformed slab with a full bullnose nosing bead along the customer edge, a brass edge strip and the bearer rails on its underside.
Brass foot rail run (Bar, Pub and Brewery Taproom)
A 1.2 m brass foot rail on three turned stanchions with rubber floor pads, the run that goes along the base of a bar front.
AnimatedBar counter end with lift flap (Bar, Pub and Brewery Taproom)
The service end of a bar counter: a panelled half with a fixed bar top, a turned newel post and a hinged bar-top leaf over an open passage with a slatted swing gate below.
Bar counter corner (Bar, Pub and Brewery Taproom)
A 90 degree bar counter corner on the same grid: two fielded panel faces meeting on a turned pilaster, a mitred bar top with brass nosing on both edges and a foot rail turning the corner.
AnimatedBar counter till position (Bar, Pub and Brewery Taproom)
A counter module built as the till position: a stainless plinth carrying a tilted touch terminal and a card reader, a docket spike and a cash drawer under the bar top.
Bar waiter station module (Bar, Pub and Brewery Taproom)
A counter module set up as the waiter station: a stainless tray shelf inside the bar, a docket rail on posts with blank order slips, a stack of round drinks trays and a divided condiment box.
Bar counter module 1200 (Bar, Pub and Brewery Taproom)
A 1.2 m pub bar counter module: recessed plinth, fielded timber front panelling under a moulded rail, a postformed bar top with a bullnose nosing and brass edge strip, a brass foot rail on stanchions and a stainless working deck with an upstand inside the bar.
Bar counter end with the flap raised (Bar, Pub and Brewery Taproom)
The bar counter end module with its hinged top leaf swung up on the newel post and the gate opened, showing the service passage in use.
Bar front panelling section (Bar, Pub and Brewery Taproom)
A 1.2 m loose section of bar front panelling: a dark skirting plinth, three bevelled fielded panels in a rail and stile frame, corner stiles and a moulded capping rail.
Bar service hatch module (Bar, Pub and Brewery Taproom)
A counter module closed off with a snug service hatch: turned posts carrying an arched voussoir head, a shelf across the opening and a slatted roller shutter drawn down behind it.
Communications relay mast (Moon Base Colony and Lunar Rovers)
A 9.5 m guyed lattice relay mast on four ballasted footings: eight braced bays, three guy wires to anchor blocks, a 2.1 m steerable dish on a yoke as a named node, three whip antennas, a photovoltaic panel and a ground equipment box.
Survey marker array (Moon Base Colony and Lunar Rovers)
A 2.4 m survey station: three graduated range poles with black and white targets on ballasted bases, a corner cube retroreflector on a levelling tripod and a photometric gnomon with a calibration strip on a base plate.
Hand pulled equipment sled (Moon Base Colony and Lunar Rovers)
A 2.9 m hand-pulled sled for short traverses: two curved skid runners bridged by a load deck, two strapped stores boxes, a soft sample bag and a rigid tow bar on a named node.