Free models · CC0
Environments
Every modern environment below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole environments set from the packs.
293 free GLB models
Tailings storage, water plant and site services (Ore Processing and Haulage Plant)
Composed example for Ore Processing and Haulage Plant.
Ore plant overview, crusher to loadout (Ore Processing and Haulage Plant)
Composed example for Ore Processing and Haulage Plant.
Milling and separation area (Ore Processing and Haulage Plant)
Composed example for Ore Processing and Haulage Plant.
Settling pond edge module (Ore Processing and Haulage Plant)
An 18 m module of settling pond edge: a compacted bank with a placed gravel beach, the water surface, a silt fence on stakes along the crest, a staff gauge at the water line, an outlet pipe through the bank to a headwall and a short handrail run.
Tailings embankment berm module (Ore Processing and Haulage Plant)
A 16 m module of tailings dam crest: a rockfill embankment section with a placed riprap upstream face, a crest haul road with edge windrows and survey marker posts, a toe drain and a decant pipe running along the toe, with pond water lapping the upstream slope.
Coarse ore stockpile cone (Ore Processing and Haulage Plant)
A live coarse ore stockpile: a 30 m conical pile at the angle of repose with a drawn down crest above the reclaim feeders and coarse rock spilled around the toe.
Product stockpile windrow (Ore Processing and Haulage Plant)
A long product stockpile: a 38 m windrow with battered ends, a flat reclaim pad worked into one flank and spilled product around the toe.
Drift run to the working face (Underground Mine and Shaft Works)
Composed example for Underground Mine and Shaft Works.
Surface shaft headworks (Underground Mine and Shaft Works)
Composed example for Underground Mine and Shaft Works.
Mine connector cases (Underground Mine and Shaft Works)
Composed example for Underground Mine and Shaft Works.
Shaft bottom station (Underground Mine and Shaft Works)
Composed example for Underground Mine and Shaft Works.
Shaft station cutaway review section (Underground Mine and Shaft Works)
A review variant of the shaft station with the east wall removed so the landing, guides, shaft sleeve and station fittings can be inspected and photographed from the side.
Shaft station chamber (Underground Mine and Shaft Works)
An 8 m square shaft station excavated at 5.6 m clear height, with arched drift openings north and south, a 3.6 m by 2.4 m shaft opening through the back, a lined shaft sleeve above with buntons and guides, a steel roof frame and a named landing gate.
Drift cutaway review section (Underground Mine and Shaft Works)
A review variant of the straight drift with the east half of the rock shell removed so the arched section, ditch, bolting and services can be inspected from the side.
Ore pass raise collar (Underground Mine and Shaft Works)
A tipping point over an ore pass raise: a concrete collar around a 2 m square opening, heavy grizzly bars, a kickboard kerb, a side chute and a control stand.
Drift dead end working face (Underground Mine and Shaft Works)
A 4 m drift module closed by a blasted rock face with a drilled round pattern, a broken muck pile at the toe and a face inspection light. One open drift port.
Widened chamber cutaway review section (Underground Mine and Shaft Works)
A review variant of the widened chamber with the east wall removed so the excavated interior, roof frame and equipment plinth can be inspected and photographed from the side.
Widened drift chamber (Underground Mine and Shaft Works)
A 6 m by 8 m widened chamber module for parking, pumping or storage, with arched drift openings at both ends, a heavier steel roof frame and a raised concrete equipment plinth.
Drift incline ramp (Underground Mine and Shaft Works)
An 8 m ramp module climbing 1 m at one in eight between two drift ports, with a shotcrete invert strip, kerb and wall lights.
Drift tee junction (Underground Mine and Shaft Works)
A 4 m flat backed intersection with three arched drift openings and a closed east wall, supported by four steel corner columns, a ring beam and roof bolts.
Drift cross junction (Underground Mine and Shaft Works)
A 4 m flat backed four way intersection with arched drift openings on every side, four steel corner columns, a ring beam grid and roof bolts.
Left hand drift curve (Underground Mine and Shaft Works)
The mirrored quarter turn drift, running from the north face to the west face on the same 4 m radius grid.
Right hand drift curve (Underground Mine and Shaft Works)
A quarter turn drift on a 4 m radius grid, running from the north face to the east face with lights on the outer wall and a compressed air line following the curve.
Steel arch set drift section (Underground Mine and Shaft Works)
A 4 m drift section supported by four rolled steel arch ribs on foot plates with steel lagging channels spanning between the ribs and two tie rods.