Free models · Game-ready GLB
Environments
Every modern environment below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole environments set from the packs.
564 free GLB models
Bank Planning Layout (Bank Vault Heist Kit)
Planning cutaway of the same hall and secure vault with low perimeter walls, a breach marker and tools staged beside an escape van. Static geometry; layout data only.
Bank Hall Vault and Tunnel (Bank Vault Heist Kit)
Open bank hall with teller line, queued approach, secure mantrap and a circular vault door behind it. The raised vault floor contains a breach above an exposed approach tunnel. Cutaway layout omits roofs and front walls for inspection; static geometry.
Civic Square (Voxel City Districts)
Bounded civic square: connected 8m streets, inward-facing architecture, sidewalk amenities and a corner shop assembled from the joined 4m facade bays. Static original voxel composition.
Commercial Corner (Voxel City Districts)
Bounded commercial corner: connected 8m streets, inward-facing architecture, sidewalk amenities and a corner shop assembled from the joined 4m facade bays. Static original voxel composition.
Residential Street (Voxel City Districts)
Bounded residential street: connected 8m streets, inward-facing architecture, sidewalk amenities and a corner shop assembled from the joined 4m facade bays. Static original voxel composition.
Fixtures and motion yard (Animated Mechanisms Kit)
Every rotating fixture, switch, hanging fitting and hazard in the kit laid out on a 6.4 m grid at real scale, five rows deep, so relative size and rest pose can be compared side by side. Large turning fixtures sit along the back, controls and hazards along the front.
Door and gate wall (Animated Mechanisms Kit)
The eight wall bay doors tiled into one continuous 24 m wall at their rest pose, proving the shared 3 m bay module and its left and right connectors, with the four free standing gates set out in front of it.
Working machine room (Animated Mechanisms Kit)
A plant floor on a 4.6 m grid: a bucket elevator, three conveyors and an inclined feed lift along the back, a gear train, crank and flywheel, piston assembly and stamping press through the middle, a scissor lift, gantry hoist, crusher and travelling saw, and a front row of...
Drift run to the working face (Underground Mine and Shaft Works)
A development drift sequence: an incline ramp rising into a level run of rock, timbered and steel arch supported sections and a shotcrete lined length leading to a dead end working face, with the drilling jumbo set up at the face, a roof bolter behind it and ventilation duct...
Shaft bottom station (Underground Mine and Shaft Works)
A shaft bottom station: the lined station chamber with the shaft above, the man cage on its guides and the skip loading pocket beside it; narrow gauge track running north through a cutaway review section to a battery locomotive and two ore cars; and a widened services chamber...
Mine connector cases (Underground Mine and Shaft Works)
Independent test rows proving each connector type: drift ports joining a straight to a curve, a tee, a cross, a ramp and a widened chamber; narrow gauge rail ports joining straight and curved panels through a turnout; and ventilation duct ports joining a straight run to a bend.
Surface shaft headworks (Underground Mine and Shaft Works)
The surface headworks: the headframe standing over the shaft collar with the man cage at the deck, the winder house facing it across the rope run, the main ventilation fan house on its plinth, the tipple and cars on the loading side, and stacked timber and stores.
AnimatedShaft station chamber (Underground Mine and Shaft Works)
An 8 m square shaft station excavated at 5.6 m clear height, with arched drift openings north and south, a 3.6 m by 2.4 m shaft opening through the back, a lined shaft sleeve above with buntons and guides, a steel roof frame and a named landing gate.
AnimatedShaft station cutaway review section (Underground Mine and Shaft Works)
A review variant of the shaft station with the east wall removed so the landing, guides, shaft sleeve and station fittings can be inspected and photographed from the side.
Drift incline ramp (Underground Mine and Shaft Works)
An 8 m ramp module climbing 1 m at one in eight between two drift ports, with a shotcrete invert strip, kerb and wall lights.
Drift cutaway review section (Underground Mine and Shaft Works)
A review variant of the straight drift with the east half of the rock shell removed so the arched section, ditch, bolting and services can be inspected from the side.
Drift dead end working face (Underground Mine and Shaft Works)
A 4 m drift module closed by a blasted rock face with a drilled round pattern, a broken muck pile at the toe and a face inspection light. One open drift port.
Widened drift chamber (Underground Mine and Shaft Works)
A 6 m by 8 m widened chamber module for parking, pumping or storage, with arched drift openings at both ends, a heavier steel roof frame and a raised concrete equipment plinth.
Ore pass raise collar (Underground Mine and Shaft Works)
A tipping point over an ore pass raise: a concrete collar around a 2 m square opening, heavy grizzly bars, a kickboard kerb, a side chute and a control stand.
Widened chamber cutaway review section (Underground Mine and Shaft Works)
A review variant of the widened chamber with the east wall removed so the excavated interior, roof frame and equipment plinth can be inspected and photographed from the side.
Left hand drift curve (Underground Mine and Shaft Works)
The mirrored quarter turn drift, running from the north face to the west face on the same 4 m radius grid.
Steel arch set drift section (Underground Mine and Shaft Works)
A 4 m drift section supported by four rolled steel arch ribs on foot plates with steel lagging channels spanning between the ribs and two tie rods.
Right hand drift curve (Underground Mine and Shaft Works)
A quarter turn drift on a 4 m radius grid, running from the north face to the east face with lights on the outer wall and a compressed air line following the curve.
Drift cross junction (Underground Mine and Shaft Works)
A 4 m flat backed four way intersection with arched drift openings on every side, four steel corner columns, a ring beam grid and roof bolts.