Free models · Game-ready GLB
Buildings
Every modern building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
1,471 free GLB models
Travelator Section (Airport Terminal and Ground Operations)
Eight metre level travelator section: a shallow pallet deck with cleat lines and amber comb plates at both ends, glazed balustrades with dark handrails, newel ends and a start-of-run status post.
Cafe Unit (Airport Terminal and Ground Operations)
Concourse cafe counter: an amber service bar with a glazed pastry case, espresso machine and till, a back bar with a three panel menu board and a cup shelf, and two bar stools.
Retail Unit (Airport Terminal and Ground Operations)
Airside retail unit: a boxed shop with a deep signage fascia over a full-width glazed front, a service counter with a till, and two runs of three-tier gondola shelving stocked with blank cartons.
AnimatedRevolving door module (Hotel and Resort Operations)
A 2.2 m revolving door, 2.49 m to the canopy top: two curved glazed drum quadrants with head and cill rails, four corner mullions, a central spindle carrying four named glass wings, and a canopy ring.
Partition wall module with vision panel (Hotel and Resort Operations)
A 1 m partition wall module with a 0.62 by 1.1 m glazed vision panel in a timber reveal above a 0.95 m sill.
Partition wall corner (Hotel and Resort Operations)
A 1 m partition wall corner: two legs meeting on the run centrelines, with skirting and capping rails carried round both faces. It carries one port on each leg so an L closes without a gap.
Partition wall module (Hotel and Resort Operations)
A 1 m partition wall module, 2.6 m tall and 100 mm thick, with skirting on both faces and a capping rail.
Corridor ceiling raft with a light slot (Hotel and Resort Operations)
The corridor ceiling raft with a continuous recessed light slot instead of three downlights.
Corridor ceiling raft with downlights (Hotel and Resort Operations)
A 1.2 by 1.6 m corridor ceiling raft: a coffered plaster tray with three recessed downlights, a slot extract grille and an emergency light box. Hang it with the raft underside at 2.7 m.
AnimatedIce and vending alcove (Hotel and Resort Operations)
A 1.2 m corridor alcove recessed 620 mm: a back panel, two returns and a head with a timber lintel, holding an ice machine with a named pivoted flap and drip grille and a glazed vending cabinet with three shelf rows, a keypad and a delivery flap.
AnimatedService door module (Hotel and Resort Operations)
A 1.2 m corridor module with a back-of-house service door: a named pivoted flush leaf with a kick plate, a push plate, a lever and a keypad, plus a wall sign and an overhead closer.
AnimatedGuest room door module with card reader (Hotel and Resort Operations)
A 1.2 m corridor module with a 0.9 by 2.1 m guest room doorway: a timber lining and architrave, a named pivoted leaf with a lever, cylinder, peephole and kick plate, a card reader on the wall, a number plate and an overhead closer with an arm.
Corridor wall module, upholstered panels (Hotel and Resort Operations)
A 1.2 m corridor wall module with four welted upholstered panels between three timber stiles, a dado rail, deep skirting and a capping rail.
AnimatedFire door module (Hotel and Resort Operations)
A 1.2 m corridor module with a double fire door: two named pivoted leaves with glazed vision panels, protection plates, push bars, hold-open magnets on the reveals and a head-mounted closer bar under a signage panel.
Corridor wall module (Hotel and Resort Operations)
A 1.2 m corridor wall module, 2.7 m tall and 120 mm thick: a papered field above a timber dado rail, deep skirting and a wall uplighter with a lit lens.
guard booth (Prison Complex Builder)
Single-person guard booth with side glazing, an open front, check-in ledge and canopy.
Animatedgatehouse (Prison Complex Builder)
Three-metre gatehouse with glazed side views, open front passage, check-in shelf and a desk console.
guard tower (Prison Complex Builder)
Elevated 6.4 m observation tower, braced supports, access ladder, glazed cabin and mounted searchlight.
high perimeter wall (Prison Complex Builder)
Four-metre precast perimeter wall with two buttresses, capping and panel joints.
AnimatedBin store gate 1.6 m (Laundromat and Cleaning Services)
The 1.6 m bin store bay fitted as a gate: two slatted leaves on named hinge pivots with barrel hinges and pull handles, a drop bolt into a ground keeper and a blank notice panel.
Bin store enclosure bay 1.6 m (Laundromat and Cleaning Services)
A 1.6 m bin store bay on the store grid: two heavy posts on base plates with a slatted timber infill between top and bottom rails, a capping rail and a kick board at the base.
AnimatedShopfront bay, door (Laundromat and Cleaning Services)
The 1.2 m shopfront bay fitted as an entrance: a glazed stile and rail door on a named hinge pivot with a full height pull and a kick plate, an overpanel light and the same fascia band above.
Shopfront bay, glazed (Laundromat and Cleaning Services)
A 1.2 m glazed shopfront bay on the shopfront run grid: a kick plinth, boxed mullions, a full height glazed light with a transom rail and a fascia band with a blank sign panel under a projecting cap.
AnimatedService window wall module (Laundromat and Cleaning Services)
A 1.2 m wall module with a service window: a 2.6 m partition bay with a heavy aperture bezel, a bullnose transaction ledge, a sliding hatch on a named pivot, a fixed upper light, a speech grille and a blank sign panel.