Free models · Game-ready GLB
Buildings
Every building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
3,029 free GLB models
AnimatedPit Garage Bay Module (Go Kart Track and Pit Lane)
One 5 m pit garage bay, 6 m deep and 3.1 m to the roof: half thickness party walls, a back wall with a steel bench, a strip light, a blue header with a bay number plate and a ribbed roller shutter that lifts in its guides.
Wok and Crepe Station (Street Food Market and Food Trucks)
A 2 m wok and crepe station: a stainless counter with two sunken wok wells and their pans, a round crepe plate between them, an ingredient shelf on the back uprights with five squeeze bottles and a green header board. Everything on it is static.
Bar Stall with Taps (Street Food Market and Food Trucks)
A 2.4 m bar stall: a timber counter with a steel tap font of three taps over a drip tray, two back shelves of bottles on the uprights and a red header board. The taps, the bottles and the glassware are static solids.
Trestle Stall Red Awning (Street Food Market and Food Trucks)
The trestle stall with its awning, valance and cloth in the second market colour, red instead of green, so a run of stalls beside one another never repeats. The geometry and the produce trays are unchanged.
Market Stall Frame Bare (Street Food Market and Food Trucks)
The same 3 m gazebo reduced to its frame: four legs on footplates, the eaves frame and the rafters, with no canopy, sheets, counter or board, so a developer can dress the pitch with the pack counter modules, awnings and signage of their own choosing.
AnimatedGrill Stall with Hood (Street Food Market and Food Trucks)
A 2.2 m grill station: a charcoal counter with a recessed griddle bed under seven steel bars, a warming plate at one end, a stainless extractor hood on two uprights with a flue, and a red header board. The hood fan spins; the flue, the bars and the burners are static.
Trestle Stall with Awning (Street Food Market and Food Trucks)
A 2.6 m trestle stall: a timber table on two A frames with a cloth to the ground, three trays of produce on the top, a back frame with a painted name board and a green flat awning on two struts over the front with a valance. The fabric is rigid and does not flap.
Gazebo Stall with Canopy (Street Food Market and Food Trucks)
A 3 m square pop up gazebo pitch: four steel legs on footplates, an eaves frame with rafters to the ridge, a red pitched canopy with a scalloped valance, a back and two side sheets, a timber serving counter across the front and a painted name board over it.
AnimatedRoller door module, 4 m (Woodworking Workshop and Joinery)
Full height timber delivery entrance module: a 3.2 m by 3.2 m opening in a cream clad surround, charcoal guide channels, red impact posts, a shutter hood and a slatted blue curtain that lifts clear of the opening.
Workshop wall panel module, 4 m (Woodworking Workshop and Joinery)
Cream painted workshop wall 4 m wide and 2.8 m tall on a concrete plinth, with timber battens, a safety yellow impact rail and a capping rail, side ports on the centre line and a top port for the glazed strip that courses above it.
Workshop window strip module, 4 m (Woodworking Workshop and Joinery)
Glazed clerestory course 4 m wide and 1.2 m tall with charcoal mullions, sill and head, built to sit on the wall panel's top port and carry the run up to 4 m so the bench works under daylight.
Bus Shelter with Advertising Panel (Bus Station and City Transit)
A 3.95 x 1.5 m kerbside shelter: four steel posts, a glazed back and end, a blue roof with a front fascia, a yellow perch rail and a red advertising case with a poster on each face closing the other end. Static.
AnimatedBus Wash Frame (Bus Station and City Transit)
A 5.7 m drive through bus wash portal: two steel uprights on charcoal bases, a head beam with a yellow warning band and three brushes, two vertical and one overhead, each its own spinning node. The water, the arches and the control panel are not modelled.
AnimatedDriver Rest Cabin (Bus Station and City Transit)
A 4.2 x 3.2 m steel rest cabin for crews: a charcoal plinth, glazed windows on three sides, a blue hinged door on the front with two concrete steps up to it and a blue roof. The interior is not modelled.
AnimatedTicket Office Kiosk (Bus Station and City Transit)
A 3.5 x 2.9 m ticket kiosk: a concrete body with a blue fascia band and roof, a glazed serving window over a steel counter shelf and a ribbed roller shutter built as one node hinged on its top edge, so it lifts out over the counter. The interior is not modelled.
AnimatedWaiting Room Module (Bus Station and City Transit)
A 6 x 5 m glazed waiting room: a concrete plinth and back wall, glazed side walls, a glazed front with a hinged door leaf, a blue flat roof with its plant unit and a bench along the back. Modules butt end to end into a hall.
Platform Shelter Unit (Bus Station and City Transit)
A 4.3 x 2.6 m platform shelter: four steel posts, a glazed back and two glazed ends, a blue roof with a fascia across the open front and a yellow bench on charcoal legs along the back wall. Static.
Station Canopy Section (Bus Station and City Transit)
A 6 m bay of station canopy: a pair of 5.15 m steel columns on the platform centreline, a head beam, a 7.5 m deck cantilevered over the platform edges, blue ribs across it and a blue fascia down both sides. Bays butt into a canopy of any length.
Wall Air Vent (Nightclub and DJ Booth)
A 600 by 400 mm extract vent: a pressed grille with seven raked blades in a brushed frame, for the wall above the bar or beside the toilets where a club has to move its air.
Acoustic Wall Panel (Nightclub and DJ Booth)
A 1.2 by 0.9 m acoustic wall panel: a velvet faced absorber in a dark frame with brushed stiles and nine magenta flutes across the face, ported on both stiles so panels run along a wall without a gap.
Cloakroom Counter with Rails (Nightclub and DJ Booth)
A cloakroom position: a 1.8 m timber counter with a pale stone top, a magenta light panel on the customer face and a numbered ticket block, backed by a hanging rail on two stands carrying nine empty hangers.
Ceiling Truss Grid Module (Nightclub and DJ Booth)
The junction block a ceiling truss grid is built from: a 300 mm cube with half metre arms on all four sides and spigot plates on every one, so straight bays run out of it in both directions and a grid closes on a 3 m pitch.
AnimatedEntrance Door Module (Nightclub and DJ Booth)
A 1.2 by 2.6 m wall module with the club entrance in it: a timber leaf 960 mm wide in a brushed metal lining with a mirrored vision panel and a full height pull bar, on the same wall ports as the mirror panel so a door drops into any run.
Club Floor Tile (Nightclub and DJ Booth)
A 2 m square club floor tile 80 mm deep: a dark tray with a poured grey resin face divided by brushed aluminium strips, ported on all four edges so a whole room is laid from repeats of one model.