Free models · Game-ready GLB
Buildings
Every modern building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
1,471 free GLB models
Workshop wall panel module, 4 m (Woodworking Workshop and Joinery)
Cream painted workshop wall 4 m wide and 2.8 m tall on a concrete plinth, with timber battens, a safety yellow impact rail and a capping rail, side ports on the centre line and a top port for the glazed strip that courses above it.
Workshop window strip module, 4 m (Woodworking Workshop and Joinery)
Glazed clerestory course 4 m wide and 1.2 m tall with charcoal mullions, sill and head, built to sit on the wall panel's top port and carry the run up to 4 m so the bench works under daylight.
Bus Shelter with Advertising Panel (Bus Station and City Transit)
A 3.95 x 1.5 m kerbside shelter: four steel posts, a glazed back and end, a blue roof with a front fascia, a yellow perch rail and a red advertising case with a poster on each face closing the other end. Static.
AnimatedBus Wash Frame (Bus Station and City Transit)
A 5.7 m drive through bus wash portal: two steel uprights on charcoal bases, a head beam with a yellow warning band and three brushes, two vertical and one overhead, each its own spinning node. The water, the arches and the control panel are not modelled.
AnimatedDriver Rest Cabin (Bus Station and City Transit)
A 4.2 x 3.2 m steel rest cabin for crews: a charcoal plinth, glazed windows on three sides, a blue hinged door on the front with two concrete steps up to it and a blue roof. The interior is not modelled.
AnimatedTicket Office Kiosk (Bus Station and City Transit)
A 3.5 x 2.9 m ticket kiosk: a concrete body with a blue fascia band and roof, a glazed serving window over a steel counter shelf and a ribbed roller shutter built as one node hinged on its top edge, so it lifts out over the counter. The interior is not modelled.
AnimatedWaiting Room Module (Bus Station and City Transit)
A 6 x 5 m glazed waiting room: a concrete plinth and back wall, glazed side walls, a glazed front with a hinged door leaf, a blue flat roof with its plant unit and a bench along the back. Modules butt end to end into a hall.
Platform Shelter Unit (Bus Station and City Transit)
A 4.3 x 2.6 m platform shelter: four steel posts, a glazed back and two glazed ends, a blue roof with a fascia across the open front and a yellow bench on charcoal legs along the back wall. Static.
Station Canopy Section (Bus Station and City Transit)
A 6 m bay of station canopy: a pair of 5.15 m steel columns on the platform centreline, a head beam, a 7.5 m deck cantilevered over the platform edges, blue ribs across it and a blue fascia down both sides. Bays butt into a canopy of any length.
Wall Air Vent (Nightclub and DJ Booth)
A 600 by 400 mm extract vent: a pressed grille with seven raked blades in a brushed frame, for the wall above the bar or beside the toilets where a club has to move its air.
Acoustic Wall Panel (Nightclub and DJ Booth)
A 1.2 by 0.9 m acoustic wall panel: a velvet faced absorber in a dark frame with brushed stiles and nine magenta flutes across the face, ported on both stiles so panels run along a wall without a gap.
Cloakroom Counter with Rails (Nightclub and DJ Booth)
A cloakroom position: a 1.8 m timber counter with a pale stone top, a magenta light panel on the customer face and a numbered ticket block, backed by a hanging rail on two stands carrying nine empty hangers.
Ceiling Truss Grid Module (Nightclub and DJ Booth)
The junction block a ceiling truss grid is built from: a 300 mm cube with half metre arms on all four sides and spigot plates on every one, so straight bays run out of it in both directions and a grid closes on a 3 m pitch.
AnimatedEntrance Door Module (Nightclub and DJ Booth)
A 1.2 by 2.6 m wall module with the club entrance in it: a timber leaf 960 mm wide in a brushed metal lining with a mirrored vision panel and a full height pull bar, on the same wall ports as the mirror panel so a door drops into any run.
Club Floor Tile (Nightclub and DJ Booth)
A 2 m square club floor tile 80 mm deep: a dark tray with a poured grey resin face divided by brushed aluminium strips, ported on all four edges so a whole room is laid from repeats of one model.
Back Bar Shelving Unit (Nightclub and DJ Booth)
A 1.5 m lit back bar bay stocked with twenty eight bottles: a timber base cupboard with a pale top, four glass shelves on dark stiles, a magenta light box behind the bottles and a cornice over the lot. 2.15 m tall.
Bar Counter Corner (Nightclub and DJ Booth)
A square corner piece for the counter run: one 650 mm bay with the same panelled front, foot rail and stone top, ported on its -X end and its -Z end so a bar turns through 90 degrees without a gap.
Bar Counter Module (Nightclub and DJ Booth)
A 1.5 m bar counter module: a panelled timber front with a brass foot rail, a stainless working deck at 900 mm and an inner shelf, under a pale stone top at 1.1 m that overhangs 100 mm toward the customer. Ports on both ends build a bar run of any length.
Mirror Wall Panel Module (Nightclub and DJ Booth)
A 1.2 by 2.6 m mirrored wall module: a full height mirror pane in a dark frame with aluminium stiles, magenta reveal strips top and bottom and a recessed kick, ported on both stiles so panels run into a continuous wall.
LED Dance Floor Tile, White (Nightclub and DJ Booth)
The 1 m LED dance floor tile with a white diffuser face, the third colour in a three way chequer and the one a floor reads as when the pattern is off.
LED Dance Floor Tile, Cyan (Nightclub and DJ Booth)
The 1 m LED dance floor tile with a cyan diffuser face, for laying a chequered floor that reads as a pattern rather than one flat colour.
LED Dance Floor Tile (Nightclub and DJ Booth)
A 1 m LED dance floor tile 80 mm deep: a dark tray with a magenta diffuser face set into a brushed aluminium frame, ported on all four edges so tiles lay out into a floor of any size.
Lighting Truss, Corner Block (Nightclub and DJ Booth)
A 90 degree corner block for the truss grid: a 300 mm cube with a half metre arm on the -X side and another on the -Z side, spigot plates on both, so a rectangular grid closes at every corner.
Lighting Truss, Straight Bay (Nightclub and DJ Booth)
A 2 m bay of 300 mm square box truss: four chords with a zigzag brace on every face, spigot plates and cone spigots at both ends and a magenta bay label under each plate.