Free models · Game-ready GLB
Buildings
Every modern building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
1,471 free GLB models
Arena Floor Tile (Laser Tag Arena and Activity Centre)
A 2 m square arena floor tile 60 mm deep: a grey resin screed in a shallow tray, marked with a lime border line, a centre bar and a chevron in each corner, ported on all four edges so a whole arena floor is laid from repeats of one model.
Floor drain grate (Butcher's Shop and Deli Counter)
A stainless slot grate in a coved kerb surround, sitting flush in a prep room floor over a dark trap. Nine bars on a framed border, at 30 mm above the floor tile.
Walk in chiller door module (Butcher's Shop and Deli Counter)
A 1.5 m wall module carrying the walk in chiller door: an insulated leaf 90 mm thick in a proud stainless frame, with a round viewing port, a burgundy kick plate, heavy hinges, a brass lever latch and a threshold ramp.
Shop floor tile (Butcher's Shop and Deli Counter)
A 1.5 m square of grey non slip floor on the same grid as the walls, with a proud jointing border and a centre inlay so a field of them reads as laid floor rather than one flat plane.
Tiled wall module, dark tile (Butcher's Shop and Deli Counter)
The same wall module in the dark glazed tile an older shop front is lined with, for a dado, a back wall or a whole room in the traditional scheme. Geometry and ports are identical to the white module.
Tiled wall module (Butcher's Shop and Deli Counter)
The 1.5 m by 3 m shop wall: white glazed tile on both faces with proud courses and perpends, a coved skirting, a burgundy dado band and a capping bead. Couple them on their stiles for a shop, a prep room or a partition.
Shop door module (Butcher's Shop and Deli Counter)
A 1.5 m wall module with a half glazed burgundy door on a real hinge, a brass threshold and head band, a transom light and a lined opening. Couple it into a run of tiled wall for the shop entrance or the door through to the prep room.
Skirting Run (Dental Practice and Surgery)
A 2 m run of coved clinical skirting: an upstand with a welded cove at the floor and a coloured capping strip, the detail that makes a vinyl floor washable.
Glazed Partition Module (Dental Practice and Surgery)
A 2 m glazed partition bay: a solid dado wall under a two panel glazed screen in a grey frame, with a manifestation strip across both panes at eye height.
Surgery Door Module Open (Dental Practice and Surgery)
The surgery door bay with the leaf standing open, for a plan that needs to see into a room from the corridor without animating anything.
Corridor Wall Module Blue (Dental Practice and Surgery)
The wall bay with a blue dado rail, for the corridor or the waiting side of a practice that uses a second house colour.
Surgery Door Module (Dental Practice and Surgery)
A 2 m wall bay with a surgery door: piers and a head over a lined opening, a hinged leaf with a vision panel, a lever handle both sides, a kick plate and a room number plate on the pier.
Corridor Wall Module (Dental Practice and Surgery)
A 2 m by 2.7 m internal wall bay: a plain plastered wall with a coved clinical skirting and a coloured dado rail, the piece a practice plan is drawn with.
Grandstand Section (Go Kart Track and Pit Lane)
Six metre grandstand bay: four raked rows of red and blue seat pans on cast concrete steps, yellow side and back rails and steel end frames. Start and end stand ports, so bays run along a straight or round the outside of a corner.
Race Control Tower (Go Kart Track and Pit Lane)
Two storey race control: a 3.6 m concrete base with a door and a louvre band, an external stair with a yellow rail, and a glazed control box above it overhanging the pit lane, with a roof rail, a mast and a results board on its front.
Pit Garage Bay Module (Go Kart Track and Pit Lane)
One 5 m pit garage bay, 6 m deep and 3.1 m to the roof: half thickness party walls, a back wall with a steel bench, a strip light, a blue header with a bay number plate and a ribbed roller shutter that lifts in its guides.
Wok and Crepe Station (Street Food Market and Food Trucks)
A 2 m wok and crepe station: a stainless counter with two sunken wok wells and their pans, a round crepe plate between them, an ingredient shelf on the back uprights with five squeeze bottles and a green header board. Everything on it is static.
Bar Stall with Taps (Street Food Market and Food Trucks)
A 2.4 m bar stall: a timber counter with a steel tap font of three taps over a drip tray, two back shelves of bottles on the uprights and a red header board. The taps, the bottles and the glassware are static solids.
Trestle Stall Red Awning (Street Food Market and Food Trucks)
The trestle stall with its awning, valance and cloth in the second market colour, red instead of green, so a run of stalls beside one another never repeats. The geometry and the produce trays are unchanged.
Market Stall Frame Bare (Street Food Market and Food Trucks)
The same 3 m gazebo reduced to its frame: four legs on footplates, the eaves frame and the rafters, with no canopy, sheets, counter or board, so a developer can dress the pitch with the pack counter modules, awnings and signage of their own choosing.
Grill Stall with Hood (Street Food Market and Food Trucks)
A 2.2 m grill station: a charcoal counter with a recessed griddle bed under seven steel bars, a warming plate at one end, a stainless extractor hood on two uprights with a flue, and a red header board. The hood fan spins; the flue, the bars and the burners are static.
Trestle Stall with Awning (Street Food Market and Food Trucks)
A 2.6 m trestle stall: a timber table on two A frames with a cloth to the ground, three trays of produce on the top, a back frame with a painted name board and a green flat awning on two struts over the front with a valance. The fabric is rigid and does not flap.
Gazebo Stall with Canopy (Street Food Market and Food Trucks)
A 3 m square pop up gazebo pitch: four steel legs on footplates, an eaves frame with rafters to the ridge, a red pitched canopy with a scalloped valance, a back and two side sheets, a timber serving counter across the front and a painted name board over it.
Roller door module, 4 m (Woodworking Workshop and Joinery)
Full height timber delivery entrance module: a 3.2 m by 3.2 m opening in a cream clad surround, charcoal guide channels, red impact posts, a shutter hood and a slatted blue curtain that lifts clear of the opening.