Free models · Game-ready GLB
Buildings
Every modern building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
1,471 free GLB models
Material bay divider wall, 4 m (Recycling Centre and Waste Transfer Yard)
Precast push wall 4 m long and 2.4 m tall for dividing a transfer yard into material bays: a tapered concrete panel on a wide foot with a charcoal impact kerb, a yellow high visibility top band and end ports so bays repeat.
Weighbridge control cabin (Recycling Centre and Waste Transfer Yard)
Kiosk beside the weighbridge 2.4 m square and 3 m tall: a steel clad cabin on a concrete plinth with a green base band, a wide charcoal window with a yellow canopy over the serving hatch, a charcoal door and a blue sign panel.
AnimatedReuse shop cabin with roller shutter (Recycling Centre and Waste Transfer Yard)
Reuse shop for the tip: a 4 m green clad cabin 2.8 m tall on concrete blocks with a steel roof, a yellow fascia, a charcoal window with a display shelf of boxed goods and an orange roller shutter that lifts clear of the counter opening.
Skip platform stair flight (Recycling Centre and Waste Transfer Yard)
Public access stair up to a tipping platform: seven steel treads on charcoal stringers rising 1.2 m over a 1.8 m run, yellow handrails on knee height posts both sides and bolted base plates, 1.4 m wide.
Raised skip platform section, 4 m (Recycling Centre and Waste Transfer Yard)
Public tipping platform module 4 m wide and 3 m deep with its deck 1.2 m up: steel chequer deck on a charcoal portal frame, a yellow tipping kerb along the front edge, a two rail guard along the back and side ports on the deck line.
Corner stall unit (Indoor Market Hall and Traders)
The square unit that turns a row through 90 degrees: canopies on both open faces, an L of boarded counter round the corner with a mitred timber top in the knee, and the same posts, valance and head frame as the straight stall.
Open stall unit, blue livery (Indoor Market Hall and Traders)
The same stall with its counter boarding and valance in the hall's blue livery under the same striped canopy, so neighbouring pitches in one row are told apart at a glance.
Open stall unit with counter and canopy (Indoor Market Hall and Traders)
The pitch a trader hires by the day: four steel posts and a head frame carrying a striped canvas canopy with a scalloped valance, over a boarded timber counter with a raked display back, a price rail and a blank valance board.
AnimatedLock up stall unit with roller shutter (Indoor Market Hall and Traders)
The shuttered unit that lines a market hall wall: a painted timber carcass 3 m wide and 2.4 m deep with party walls, a stone deck, a fascia with a blank sign band, a serving counter and stocked back shelves, and a corrugated roller shutter in its box.
Lock up stall unit, shutter up (Indoor Market Hall and Traders)
The same unit trading: the shutter is modelled rolled into its box instead of hanging in the opening, so the counter, the stocked shelves and the interior are open to the aisle without animating anything.
AnimatedLock up stall unit, red livery (Indoor Market Hall and Traders)
The same unit painted in the hall's market red instead of the blue, so a row of lock ups reads as separate businesses. Geometry, ports and shutter are identical.
AnimatedEntrance arch module with gates (Indoor Market Hall and Traders)
The public way in: brick piers on the wall grid carrying a turned stone arch of eleven voussoirs, a blank name panel and a cornice above, and a pair of cast iron gates of vertical bars with spear heads hung on the imposts.
AnimatedService door wall module (Indoor Market Hall and Traders)
The same bay with the traders entrance in it: a stone head over a 1.06 m opening, an iron lining and threshold, and a ribbed steel leaf with a vision panel and a pull handle on a real hinge.
Market hall floor bay (Indoor Market Hall and Traders)
A 2 m square of the hall floor: 50 mm stone flags with a raked jointing grid and a proud edge joint, so a field of bays reads as paving and the stalls and aisles have ground to stand on.
Brick hall wall module (Indoor Market Hall and Traders)
The 4 m by 4 m bay of the hall shell: red stock brick faced on both sides with a stone plinth, a string course and a moulded cornice, and a brick pilaster on each pier so a run reads as a structural bay rather than a flat panel.
Roof truss bay with glazed rooflight (Indoor Market Hall and Traders)
One 4 m bay of the hall roof: a wrought iron truss of tie beam, principal rafters, king post and struts spanning 11.2 m, with purlins, slate sheeting, eaves gutters and a patent glazed ridge rooflight that lights the hall from above.
Cast iron column module (Indoor Market Hall and Traders)
The 4 m cast iron column a market hall roof stands on: a stone pad, a moulded base, a shaft with a shallow entasis, a foliate capital and a square bearing plate, with pierced spandrel brackets in the knee facing along the hall.
Clerestory wall module (Indoor Market Hall and Traders)
The same bay with a cast iron window band over a brick base: a stone cill and head, five mullions and a transom, and a single pane behind them. This is what lights a hall at stall height when the rooflights alone are not enough.
Mezzanine stair flight, 3 m rise (Parcel Depot and Sorting Hall)
Industrial straight flight up to the office deck: fourteen open chequer plate treads on charcoal stringers, blue grab rails on posts each side and bolted base plates, rising 3 m over a 3.2 m run.
Mezzanine office deck section, 4 m (Parcel Depot and Sorting Hall)
Mezzanine module 4 m square: a chequer plate deck on charcoal bearers with a yellow edge nosing, a two rail guard along the front edge with blue uprights, and end ports so a run of sections makes an office floor over the sorting hall.
Sorting hall wall module, 4 m (Parcel Depot and Sorting Hall)
Ribbed grey cladding wall 4 m wide, 3.6 m tall and 160 mm thick on a concrete plinth, with a charcoal capping rail, a blue wayfinding band at 2.2 m and side ports on the centre line so a hall encloses itself.
Roller shutter door module, open (Parcel Depot and Sorting Hall)
The same 4 m door bay with the curtain coiled on its barrel in the hood and the opening clear, for a dock a vehicle is backed onto. Identical cladding, guides, impact posts and wall ports.
AnimatedRoller shutter door module, 4 m (Parcel Depot and Sorting Hall)
Vehicle door bay 4 m wide and 4.2 m tall in the same wall grid: a 3.2 m by 3.5 m opening in ribbed cladding, charcoal guide channels, yellow impact posts, a shutter hood and a slatted curtain that lifts clear of the opening.
Dock shelter frame (Parcel Depot and Sorting Hall)
Weather shelter over a loading bay: a grey portal 3.8 m wide and 4.2 m tall standing 0.7 m proud of the wall, with charcoal curtain panels down both jambs and across the head and yellow guide stripes on the reveals.