About
A 44 m inclined conveyor flight climbing 12 m to a silo roof or transfer tower: stringers on two trestle bents and four braced lattice towers, a troughed belt on idlers, a climbing walkway with a toe board, and a head pulley, drive, chute and stair tower. Dimensions 7.55 by 14.95 by 46.44 m (X by Y by Z), metre units, +Y up, +Z forward, resting on y=0. Belt ports belt-a at 0.00, 2.40, -22.00; belt-b at 0.00, 14.40, 22.00. Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Inclined feed conveyor flight, 44 m (Ore Processing and Haulage Plant)” asset in my project. Model: https://cdn.3dassets.dev/assets/13431/v1/model.glb Asset page: https://3dassets.dev/assets/ore-processing-and-haulage-plant-silo-feed-conveyor-77f6f8c9 Description: A 44 m inclined conveyor flight climbing 12 m to a silo roof or transfer tower: stringers on two trestle bents and four braced lattice towers, a troughed belt on idlers, a climbing walkway with a toe board, and a head pulley, drive, chute and stair tower. - Dimensions (X × Y × Z): 7.543 × 14.954 × 46.439 metres - Triangles: 8.9k - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/13431/v1/model.glb', (gltf) => {
scene.add(gltf.scene)
})Inclined feed conveyor flight, 44 m (Ore Processing and Haulage Plant)
A 44 m inclined conveyor flight climbing 12 m to a silo roof or transfer tower: stringers on two trestle bents and four braced lattice towers, a troughed belt on idlers, a climbing walkway with a toe board, and a head pulley, drive, chute and stair tower.
More in Roads & Infrastructure
Dock Platform (Quiet Lake Fishing)
2.4 m square timber module; four compatible edge ports at deck height 0.7 m.
Harbor Building Quay (Harbor & Tackle)
8 × 4 m building platform with six banded piles, chamfered decking and an offset 1.8 m pier connection.
Sloped Harbor Gangway (Harbor & Tackle)
Three-meter ramp with slatted walking surface, traction battens and continuous handrails.
Corner Pier Section (Harbor & Tackle)
L-shaped pier with an open water notch and two orthogonal connection faces.
T Junction Pier (Harbor & Tackle)
5.4 m crosshead with a south approach, three 1.8 m connection faces and independently planked branches.
Straight Pier Section (Harbor & Tackle)
1.8 × 3 m pier with individual chamfered planks, iron collars and exposed fasteners; deck at 0.85 m.
AnimatedPerimeter Gate (Airport Terminal and Ground Operations)
Airside perimeter sliding gate: two capped portal posts on cast pads, a ground rail, a mesh gate leaf on a named sliding node with hazard panels and rollers, and a guard kiosk with a card reader and a camera mast.
Perimeter Fence Run (Airport Terminal and Ground Operations)
Eight metre airfield perimeter fence bay: three posts on cast pads carrying a mesh panel with vertical wires and three line rails, angled top arms with three strand wires and a blank warning plate.
Stand Guidance Display (Airport Terminal and Ground Operations)
Visual docking guidance display: a two post frame carrying a large dark alignment screen with a centre bar and closing-rate strip, a coloured header hood and a ground level operator panel.
Jet Blast Fence (Airport Terminal and Ground Operations)
Eight metre jet blast deflector fence: five braced portal posts on pad bases carrying nine angled louvre panels, a coloured capping rail with obstruction lights and a chevron kick band along the base.
Apron Floodlight Mast (Airport Terminal and Ground Operations)
Twelve metre apron floodlight mast: a tapered pole on a cast pad with a climbing ladder, a head frame carrying five raked floodlights, a rear walk rail and a red obstruction light on the crown.
Taxiway Sign (Airport Terminal and Ground Operations)
Frangible taxiway guidance sign: a low double-sided board on two breakaway posts with a yellow direction panel and a dark mandatory panel divided by a white bar, with blank legend blocks.
Similar assets
Conveyor transfer tower (Ore Processing and Haulage Plant)
An 18 m four leg braced lattice transfer tower: four handrailed grating decks, an internal stair tower, the incoming head pulley, snub pulley and drive at 14.4 m, a flanged chute dropping 3 m through a bend, and the outgoing belt tail turned 90 degrees at 11.4 m.
Overland conveyor module, 12 m incline (Ore Processing and Haulage Plant)
A 12 m conveyor module climbing 3 m at 14 degrees: taller braced trestle bents toward the high end, the same troughed belt and idler set, a climbing walkway with handrails and a toe board, and a holdback drive on a plinth beside the low end.
Guarded conveyor transfer (Factory Conveyor Network)
Guarded conveyor transfer for modular factory and automation scenes.
Site water tower (Cold War Missile Silo and Command Bunker)
A 13.9 m elevated water tower: four splayed legs on pad footings with two levels of cross bracing, a riveted tank with a conical bottom and domed roof, band seams, a roof hatch, a balcony with a handrail, a caged ladder and a valved downcomer.
AnimatedSwan neck incline belt conveyor (Animated Mechanisms Kit)
Two stage conveyor with a low horizontal feed boot and a 26 degree incline running to a hooded discharge, each stage with its own cleated belt and drums.
Conveyor gallery bridge, 12 m rising span (Ore Processing and Haulage Plant)
A 12 m conveyor gallery that climbs 3 m between transfer towers: the same braced through truss and sheeting with a rising bottom chord, stepped bearing shoes, the belt and idlers set on the slope and a climbing internal walkway.
Cryogenic transfer arm tower (Lunar Surface Colony and Rovers)
A 6.9 m braced transfer tower with a counterweighted articulated arm: an inner boom on a slew bearing, a folding outer boom, a coupling head and a draped vacuum jacketed hose, each joint a named node, with a ground control cabinet.
AnimatedInclined cleated conveyor lift (Animated Mechanisms Kit)
Five metre cleated belt on a 24 degree incline with a feed hopper at the tail and a discharge hood at the head, so the cleat loop resets out of sight.
Conveyor gallery bridge, 12 m level span (Ore Processing and Haulage Plant)
A 12 m enclosed conveyor gallery that spans between transfer towers with no legs of its own: a braced through truss on bearing shoes, a grating floor, the belt on cross beams and troughing idlers, an internal walkway, side sheeting and a monopitch roof.
Overland conveyor module, 12 m straight (Ore Processing and Haulage Plant)
A 12 m level overland conveyor module: two stringers on braced trestle bents with longitudinal X bracing, a 1.2 m troughed belt on 35 degree three roll idlers, a return strand on flat idlers, and an access walkway on one side with handrails and a toe board.
Product silo cluster (Ore Processing and Haulage Plant)
Three concrete product silos on column bases: bolted ring beams and pile caps, discharge cones with slide gates and chutes, a linked steel roof deck with handrails, roof vents and access hatches, and a braced external stair tower with a landing.
Baggage Belt Incline (Airport Terminal and Ground Operations)
Four metre inclined baggage conveyor rising one metre: the same belt bed and guards set on a 14 degree climb, on stepped legs, for lifting a run from the make-up floor to a reclaim feed.