About
A 2.4 m fixed glass entrance canopy: a wall channel with two cranked brackets, stainless tie rods with turned fittings, a laminated glass sheet and a front gutter with a slotted grate. Overall 2.43 by 0.69 by 1.20 m (X by Y by Z). Metre units, +Y up, the side a person uses toward +Z, resting on y=0. Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Fixed glass entrance canopy (Cafe, Bakery and Coffee Bar)” asset in my project. Model: https://cdn.3dassets.dev/assets/22218/v1/model.glb Asset page: https://3dassets.dev/assets/bakery-and-cafe-canopy-fixed-eae3345a Description: A 2.4 m fixed glass entrance canopy: a wall channel with two cranked brackets, stainless tie rods with turned fittings, a laminated glass sheet and a front gutter with a slotted grate. - Dimensions (X × Y × Z): 2.43 × 0.69 × 1.195 metres - Triangles: 700 - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/22218/v1/model.glb', (gltf) => {
scene.add(gltf.scene)
})Fixed glass entrance canopy (Cafe, Bakery and Coffee Bar)
A 2.4 m fixed glass entrance canopy: a wall channel with two cranked brackets, stainless tie rods with turned fittings, a laminated glass sheet and a front gutter with a slotted grate.
More in Buildings & Architecture
Meadow Courier Post Office
A compact teal roof post office with timber framing, parcel sign and letter slot for cozy delivery games.
Tomb Chamber Cutaway (Vampire Crypt and Gothic Cathedral)
Roofless 8 m tomb chamber cutaway with the east wall omitted for overhead inspection, a south entrance and raised central dais.
AnimatedCrypt Hatch (Vampire Crypt and Gothic Cathedral)
Ground-level crypt entrance, 2.6 by 3 m: stone stair well with seven steps descending north and an iron trapdoor hinged on its south edge, 0.82 m tall.
AnimatedSexton Hut (Vampire Crypt and Gothic Cathedral)
Sexton tool hut, 3.2 by 3.2 m and 4.3 m tall: stone walls, a hinged plank door on the east side, small glazed window, steep slate roof with ridge and a chimney.
AnimatedIron Fence Gate (Vampire Crypt and Gothic Cathedral)
Cemetery gate: two stone piers with pinnacles 3.4 m tall, two hinged 1 m iron gate leaves and an overthrow arch; 2.8 m between the connector ends.
Iron Fence Corner (Vampire Crypt and Gothic Cathedral)
Railing corner: stone pier with a pyramid cap at the origin and two 1 m iron panels running east and south.
AnimatedMausoleum (Vampire Crypt and Gothic Cathedral)
Family mausoleum, 3.6 by 3.5 m and 5.5 m tall: stone box with a pointed doorway, hinged iron gate leaf, corner pilasters, pediment roof and an urn finial.
Iron Fence Straight (Vampire Crypt and Gothic Cathedral)
2 m wrought-iron railing panel, 1.7 m tall, with spear-headed bars and two rails between square posts.
Crypt Floor Tile (Vampire Crypt and Gothic Cathedral)
4 by 4 m crypt flagstone floor tile, 0.18 m thick, nine slabs over a dark bed.
Crypt Pillar (Vampire Crypt and Gothic Cathedral)
Squat octagonal crypt pier, 1.1 m across and 2.85 m tall, with a moulded base and flared capital to carry a vault springing at 1.9 to 2.85 m.
Spiral Stair (Vampire Crypt and Gothic Cathedral)
Open spiral stair on a 0.5 m newel: sixteen wedge treads climbing 3.15 m through three quarters of a turn within a 3 m circle, with an iron handrail.
Ladder Shaft (Vampire Crypt and Gothic Cathedral)
Vertical crypt access shaft on one 4 m cell: three 6 m walls, a pointed opening to the south, an iron rung ladder on the north wall and a barred grate over the top.
Similar assets
Double stainless wall shelf (Restaurant Kitchen and Dining Room)
A 1.4 m two-tier wall shelf unit: two folded stainless decks on three brackets each, tied by a back panel and two corner posts.
Wall Chimney Bracket (Modular Survival Base Builder)
Wall Chimney Bracket: 0.5 × 0.6 × 0.4 m nominal survival bracket assembly.
AnimatedCrank, rod and piston assembly (Animated Mechanisms Kit)
Open crank and slider mechanism on a painted bedplate: a bearing housing, a crank with a web and pin, a connecting rod, a crosshead on guide bars and a lathed cylinder block.
Stainless wall shelf (Restaurant Kitchen and Dining Room)
A 1.2 m wall-mounted stainless shelf: a folded deck with a raised rear lip on two pressed brackets and a mounting rail.
Wall extraction canopy (Restaurant Kitchen and Dining Room)
A 2 m wall extraction canopy: a chamfered stainless hood with four baffle grease filters leaning over the throat, a grease gutter and collection cup, two recessed lights and a round duct spigot.
Glass writing wall (Downtown Office Interiors)
A 1.8 m by 1.2 m toughened glass writing wall on four stainless standoffs, with a floating marker shelf and two markers.
Bracket Wall Lantern (Alpine Snow Village)
Snow-topped amber wall lantern on a triangular iron bracket with a mounting plate; attach back plate to a wall.
Wall folding shelf 1.5 m (Laundrette and Cleaning Services)
A 1.5 m wall mounted folding shelf on folded gallows brackets with tie rods, a postformed laminate top at 900 mm, a hanging rail on drop brackets above it and a capping shelf over the rail.
Wall-mounted television on a bracket (Hotel and Resort Operations)
A 1.1 m guest room television on an articulated wall bracket with a back plate, a swing arm and a cable trim; mount the plate at 1.1 m to the screen centre.
Wall Tie Plate (Modular Survival Base Builder)
Wall Tie Plate: 0.4 × 0.3 × 0.06 m nominal survival panel assembly.
AnimatedCrank and flywheel with connecting rod (Animated Mechanisms Kit)
Heavy six spoke flywheel on bearing pedestals driving a crank, connecting rod and crosshead along a painted bedplate with an amber hazard band at the end.
AnimatedWall crank handle on a gear box (Animated Mechanisms Kit)
Offset crank with an amber roll grip on a bolted gearbox boss, mounted on a 0.8 m painted wall panel with a label strip and an emissive lamp.