3D Assets
@3dassets
Trade counter module 1.2 m (Hardware Store and DIY Warehouse)
A 1.2 m trade counter module: a recessed plinth, a rebated customer face with a rubbing rail, two staff side shelves and a 0.75 m deep postformed worktop with a 20 mm overhang.
Shop bay end upright (Hardware Store and DIY Warehouse)
A run terminating shop shelving upright with a clad end panel and a foot plate, the piece that closes a shelving run and hides the slotted post.
Half height shop bay (Hardware Store and DIY Warehouse)
A 1.35 m by 1.2 m low shop bay on the standard bay pitch: two short uprights, a kicked base deck and two shelves, the sight line keeping fixture used down the centre of a store.
AnimatedSmall parts drawer cabinet (Hardware Store and DIY Warehouse)
A 0.62 m wide small parts cabinet: a steel case on a plinth with twenty four clear fronted drawers in six named, pivoted rows and a label strip above each drawer.
Mesh basket bay (Hardware Store and DIY Warehouse)
A 1.35 m bay of four tipping wire baskets on a steel frame, the bulk bin fixture for loose brackets, offcuts and clearance stock.
Fastener bin wall (Hardware Store and DIY Warehouse)
A 1.2 m by 1.8 m loose fastener wall: five sloping shelves of open picking bins with label strips, the bulk screw, nail and bolt fixture beside a trade counter.
Hanging rail shop bay (Hardware Store and DIY Warehouse)
A 1.35 m by 2.4 m shop bay with three full width hanging rails and stub arms, the fixture that carries coiled hose, cable, rope and strimmer line.
Endcap promotion bay (Hardware Store and DIY Warehouse)
A 1.0 m by 1.6 m endcap unit: a stepped three tier display on a kicked base with a header board above, the fixture that caps a shelving run into the main aisle.
Shop shelving bay with pegboard back (Hardware Store and DIY Warehouse)
The 2.4 m shop bay fitted with a perforated pegboard back and three rows of hanging peg hooks in place of the plain panel, for blister packed hardware.
Shop shelving bay 2.4 m (Hardware Store and DIY Warehouse)
A 2.4 m high shop shelving bay on the 1.35 m bay pitch: two slotted uprights, a kicked base deck, cantilever shelves with turned front lips, price rails and a plain back panel.
Wire shelf shop bay (Hardware Store and DIY Warehouse)
A 1.35 m by 2.0 m shop bay racked with five welded wire shelves on bracket pairs, the ventilated shelving used for paint, sealant and chemical stock.
Shop shelving bay with bin fronts (Hardware Store and DIY Warehouse)
The 2.4 m shop bay with three open fronted sloping picking bins on every shelf and a mesh back, the loose fixings and fittings face of a hardware aisle.
Pallet support bar set (Hardware Store and DIY Warehouse)
Three 1.05 m folded steel pallet support bars with hooked ends, the cross members dropped between a beam pair to carry a pallet whose bearers run the wrong way.
Shop shelving bay 3.0 m (Hardware Store and DIY Warehouse)
A 3.0 m high shop shelving bay on the 1.35 m bay pitch: two slotted uprights, a kicked base deck, cantilever shelves with turned front lips, price rails and a plain back panel.
Shop shelving bay 2.0 m (Hardware Store and DIY Warehouse)
A 2.0 m high shop shelving bay on the 1.35 m bay pitch: two slotted uprights, a kicked base deck, cantilever shelves with turned front lips, price rails and a plain back panel.
Rack row spacer set (Hardware Store and DIY Warehouse)
A pair of 0.3 m row spacers: bolted tube struts with end plates that tie two back to back racking frames together and hold the flue gap open.
Rack load notice plate (Hardware Store and DIY Warehouse)
A blank load notice plate on a 1.5 m post: a chamfered sign board with a raised face and a rivet at each corner, mounted at the end of a racking run.
Pipe and dowel tube rack (Hardware Store and DIY Warehouse)
A 1.2 m wide upright tube rack: a welded steel frame divided into twelve open compartments by tube dividers, for dowel, conduit, angle and moulding sold by the length.
Sheet material A frame (Hardware Store and DIY Warehouse)
A 2.4 m wide A frame for board and sheet stock: two leaning steel decks with timber batten faces, five vertical dividers and a kerbed foot rail on each side.
Rack safety mesh backing (Hardware Store and DIY Warehouse)
A bay wide rear mesh guard, 1.35 m by 2.2 m: welded mesh in a tubular frame with four bracket clamps that grip the racking uprights behind a pick face.
Bulk stillage bin (Hardware Store and DIY Warehouse)
A 1.0 m steel stillage: a folded sheet box with a ribbed body, forklift entry channels beneath and four stacking corner posts, used for loose bulk hardware.
Pallet rack beam pair (Hardware Store and DIY Warehouse)
A 1.35 m pallet racking beam level: two box section beams 1.1 m apart with hooked end connectors, three hook lugs per end, safety lock pins and a load ledge along each top face.
Rack end panel with sign board (Hardware Store and DIY Warehouse)
A 1.1 m by 2.4 m rack end cladding panel on a light frame with a blank 0.9 m sign board above it, closing the end of a racking run to the shopfloor.
AnimatedMesh stock cage (Hardware Store and DIY Warehouse)
A 1.2 m by 1.0 m folding mesh stock cage: welded mesh sides on a steel base frame with stacking corner feet and a half drop front gate on named hinges.