3D Assets
@3dassets
AnimatedFlight Case, Small (Music Recording Studio and Instruments)
The same ply flight case in a 560 by 400 by 400 mm size without castors, for microphones, leads and small outboard.
AnimatedFlight Case, Large (Music Recording Studio and Instruments)
A 920 by 560 by 580 mm ply flight case on castors: a riveted shell with aluminium extrusion edging, eight corner caps, two butterfly latches, spring handles, an amber lid label and a lid hinged along its back edge.
AnimatedCable Drum (Music Recording Studio and Instruments)
A 540 mm timber cable drum wound with black multicore, resting on its flanges with the tail led off and coiled on the floor beside it.
Isolation Screen (Music Recording Studio and Instruments)
A free-standing 900 by 1800 mm isolation screen: a framed 70 mm absorber in grey fabric on a steel post frame with weighted feet. Its screen-left and screen-right ports meet the next screen square or at a right angle, so three of them fold into a vocal booth.
Acoustic Ceiling Cloud (Music Recording Studio and Instruments)
A 1.2 by 0.9 m absorber cloud on four hanging wires: a timber frame wrapped in grey fabric with 550 mm of wire above it and ceiling anchors. The origin is at the bottom of the panel, so placing it at the ceiling height less the drop hangs it correctly.
AnimatedStudio Door Module (Music Recording Studio and Instruments)
A 1.2 m wall module 2.4 m tall with a heavy acoustic studio door: a 860 by 2040 mm leaf with a fabric inset, a lever handle and three hinges, in a timber lined frame with a skirting. It carries the same wall-left and wall-right ports as the acoustic panel module.
Control Room Window Module (Music Recording Studio and Instruments)
A 2.4 m wall module 2.4 m tall with a 1.8 by 1.1 m double glazed studio window at 950 mm: two panes splayed apart in timber reveals, with a sill, a head and a skirting. Its wall-left and wall-right ports line up with the 1.2 m wall grid, so it drops into a run of acoustic panels.
Corner Bass Trap (Music Recording Studio and Instruments)
A 2.4 m corner bass trap: a 300 mm column with a quarter round fabric wrapped absorber across its face, timber caps and a skirting. Its wall-left, wall-right and wall-back ports meet the end of a wall run on either axis, so it closes a corner or caps an open end.
Acoustic Wall Panel Module, Amber (Music Recording Studio and Instruments)
The same 1.2 m treated wall module with the absorber wrapped in amber fabric, so a run of walls can be banded in colour instead of reading as a grey box.
Studio Floor Module, Grey (Music Recording Studio and Instruments)
The same 1 m floating floor module in a grey painted finish, for a control room floor that reads apart from the live room next door.
Studio Floor Module (Music Recording Studio and Instruments)
A 1 m square floating floor module in oak boards on a resilient mat, 30 mm thick, with floor-left, floor-right, floor-front and floor-back ports at the edge midpoints so modules tile both ways across a room.
Acoustic Wall Panel Module (Music Recording Studio and Instruments)
A 1.2 m wall module 2.4 m tall: a stud wall with a skirting and a framed 50 mm acoustic absorber in grey fabric on its face, with wall-left and wall-right ports at half height so modules run into each other, into a window module or into a corner bass trap.
AnimatedTwo Inch Tape Machine (Music Recording Studio and Instruments)
A two inch multitrack tape machine, the hero piece of a control room: a pedestal cabinet with a timber front under an upright transport deck carrying two 10 inch reels with spoked flanges and brass hubs, a head block, five transport buttons and two meters. 1.3 m tall.
Patch Bay Panel (Music Recording Studio and Instruments)
A 2U 19 inch patch bay: 48 quarter inch jacks in two rows of 24 with designation strips between them, on a rack panel with mounting ears. It stands on its bottom edge so it can be dropped straight into a rack.
Monitor Controller (Music Recording Studio and Instruments)
A desktop monitor controller, 200 by 170 mm: a weighted wedge with a large volume encoder in a ring, four source and mute buttons and a small meter display.
Headphones on a Wall Hook (Music Recording Studio and Instruments)
A pair of closed back studio headphones hanging on a wall hook: a padded headband, two swivel cups with fabric pads and an alloy yoke, on a screwed wall plate. The plate sits flat against the wall with the hook 75 mm proud of it.
AnimatedStudio Desk Chair (Music Recording Studio and Instruments)
An upholstered studio chair on a five star castored base: a padded seat and back with a gas lift column and a pair of tube armrests, 1.0 m to the top of the back.
AnimatedOutboard Rack on Castors (Music Recording Studio and Instruments)
A 900 mm open frame outboard rack on four swivel castors, with a timber top, three pieces of 19 inch gear and a drawer in the bottom bay. It rolls between the control room and the live room.
AnimatedStudio Rack Cabinet (Music Recording Studio and Instruments)
A 1.15 m timber sided rack cabinet on rubber feet, loaded with 19 inch outboard: a compressor, a channel strip, a converter, a power conditioner and a patch strip, with meter windows, knob rows and rack screws, plus a shallow accessory drawer on slides.
Studio Desk with Screen Pair (Music Recording Studio and Instruments)
A 1.6 m studio desk in dark timber with a steel underframe, a lower shelf and a modesty panel, carrying a pair of 24 inch screens on their feet, a keyboard and a mouse. The screens are turned in toward the engineer.
Mixing Console (Music Recording Studio and Instruments)
A 1.98 m analogue mixing console on timber side cheeks: sixteen channel strips of four knobs, a switch and a 100 mm fader on a raked bay, a master section, a meter bridge with two meter windows, and an armrest along the engineer side. It stands 1.02 m to the top of the bridge.
Studio Monitor on a Stand (Music Recording Studio and Instruments)
A two way nearfield studio monitor on a 940 mm pole stand: a 240 by 370 mm cabinet with a six inch woofer, a waveguide tweeter, a rear facing port tube and a status lamp, tipped back on a cast plate base.
Vocal Microphone with Pop Shield (Music Recording Studio and Instruments)
A vocal microphone at 1.54 m on a straight stand: a large diaphragm capsule in an elastic shockmount, with a 150 mm pop shield on a gooseneck clamped to the column, over a telescopic column and a rubber footed tripod.
Bass Amplifier Stack (Music Recording Studio and Instruments)
A bass rig 1.24 m tall: an eight by ten inch speaker cabinet with a grille cloth, metal corner caps and rubber feet, under a rackmount amplifier head with seven knobs, a meter window and a status lamp.