3D Assets
@3dassets
Boom Stand, Empty (Music Recording Studio and Instruments)
The same counterweighted boom stand with an empty clip, for a source that already has its own microphone or for dressing a corner of the live room.
Microphone on a Boom Stand (Music Recording Studio and Instruments)
A counterweighted boom stand at 1.42 m with a large diaphragm microphone in its clip, angled down over a source 620 mm out from the column. The base is a rubber footed tripod and the column is telescopic.
Guitar Pedal Board (Music Recording Studio and Instruments)
A sloped 620 by 320 mm pedal board carrying five effects pedals in coloured enclosures, each with two knobs, a footswitch and a status lamp, patched together with short jumper leads.
Synth Keyboard on an X Stand (Music Recording Studio and Instruments)
A 61 note synthesiser on an X frame stand at 720 mm: a sloped control panel with six knobs, a display and a pitch strip over a keybed of weighted naturals and sharps, on a crossed tube frame with rubber feet.
Guitar Amplifier Combo (Music Recording Studio and Instruments)
A 1x12 valve combo guitar amplifier, 620 by 555 by 260 mm: a covered cabinet with a cream grille cloth over a twelve inch driver, metal corner caps, a strap handle, rubber feet and a top mounted control panel with six knobs, a pilot lamp and an input jack.
Upright Piano (Music Recording Studio and Instruments)
A 1.46 m upright piano in dark timber: a lidded carcass with a fall board, a hinged music desk, a keybed of naturals and sharps, a toe block with three brass pedals and four castors. It stands 1.31 m to the top.
AnimatedHi-Hat Stand with Cymbals (Music Recording Studio and Instruments)
A hi-hat stand with a pair of 14 inch brass cymbals: the bottom cymbal fixed on its seat and the top one on a clutch 70 mm above it, over a pull rod, a footboard and a rubber footed tripod.
Bass Drum with Two Rack Toms (Music Recording Studio and Instruments)
A 22 inch bass drum in a gloss red finish on its spurs, with a badge ring on the front head, eight tube lugs and counter hoops, carrying a 12 and a 13 inch rack tom on a mount post and arms tipped toward the player. Together they are the front of a five piece kit.
AnimatedCrash Cymbal on a Stand (Music Recording Studio and Instruments)
An 18 inch crash cymbal on a straight stand at 1.38 m: a hammered brass disc with a raised bell sitting on a felt and wing nut over a tilter, on a telescopic column and a rubber footed tripod.
Snare Drum on a Stand (Music Recording Studio and Instruments)
A 14 by 5.5 inch brushed steel snare drum held in a three-armed basket stand at 620 mm, with eight tube lugs, counter hoops, a strainer and a throw-off lever. The stand is a tripod on rubber feet with a telescopic column.
Floor Tom (Music Recording Studio and Instruments)
A 16 by 14 inch floor tom in a gloss red finish on three rubber tipped legs, with eight tube lugs, counter hoops and leg brackets. It stands 600 mm to the batter head, which is where a five piece kit puts it.
Electric Guitar on a Stand, Natural Finish (Music Recording Studio and Instruments)
The same solid body electric guitar and A-frame stand in a natural timber finish, for a second guitar in a rack without a repeated colour.
Acoustic Guitar on a Stand (Music Recording Studio and Instruments)
A dreadnought acoustic guitar on a folding A-frame stand: a 500 mm waisted timber body 115 mm deep with a rosetted sound hole, a pin bridge with a bone saddle, a 19 fret neck, a headstock with six machine heads and six strings from bridge to nut.
Electric Guitar on a Stand (Music Recording Studio and Instruments)
A solid body electric guitar in a gloss red finish on a folding A-frame stand: a waisted double cutaway body 460 mm long, two humbuckers, a scratchplate, a bridge, three controls and a jack, a 21 fret neck, a machine head headstock and six strings from bridge to nut.
Bass Guitar on a Stand (Music Recording Studio and Instruments)
A four string electric bass on a folding A-frame stand: a 500 mm offset body in a satin graphite finish, two pickups, a bridge and controls, a long 20 fret neck and a two-a-side headstock with heavy machine heads. Four strings run from the bridge to the nut.
Ball Park and Practice Cage (Baseball Park and Batting Cages)
A working ball park built from the kit. The infield is nine clay tiles laid as one square with home plate on the near corner, first, second and third base bags on the other three 18 m away and the mound at the centre of them, and the chalked foul lines leave the plate at...
AnimatedBall Cart (Baseball Park and Batting Cages)
A wheeled ball cart: a steel framed mesh basket on two wheels with a push handle, loaded with nine baseballs, the cart that comes out for batting practice.
Ticket Kiosk (Baseball Park and Batting Cages)
A 2.4 m square concession and ticket kiosk 2.8 m tall: a navy box with a white counter under a red awning, a steel framed serving window and a blank board on the back.
Park Bench And Fence (Baseball Park and Batting Cages)
A 1.6 m timber bench against a 2 m mesh fence bay with a navy kick panel, the spot outside the line where people stand and watch an inning.
AnimatedTarp Roll (Baseball Park and Batting Cages)
The infield tarp on its roller: a 2.7 m navy roll with a charcoal edge band on a steel axle between two braced A frames, parked down the line until it rains.
Base Anchor (Baseball Park and Batting Cages)
A base anchor set in its clay collar: a charcoal ground plate, the steel socket a base bag pegs into and a white cover plug, with the spare peg standing beside it.
AnimatedChalk Line Marker (Baseball Park and Batting Cages)
A push chalk line marker: a red hopper over a steel gate box and a white line plate, on two wheels with a timber handle, what a foul line is drawn with before a game.
AnimatedField Rake (Baseball Park and Batting Cages)
A 1.2 m drag rake on two wheels with a 1.5 m timber handle: a steel head of thirteen tines and a levelling bar, what the infield clay is smoothed with between innings.
Bat Rack (Baseball Park and Batting Cages)
A 1.3 m dugout bat rack: a timber base with six slotted dividers in a steel frame on a navy back board, holding three bats upright against the dugout wall.