3D Assets
@3dassets
Sorting chute with bag frame (Parcel Depot and Sorting Hall)
Discharge chute off a diverter: a galvanised slide with grey side walls and a yellow lip, on charcoal legs, running down into a tubular bag frame with a red mail bag hanging in it and a blank cream destination card.
AnimatedParcel scanner arch over a belt (Parcel Depot and Sorting Hall)
Reading tunnel over a powered 2 m belt module: a blue portal 2.1 m tall carrying a six sided camera head, lit reading strips down both jambs, a cable tray along the top and a status screen on a bracket, ported as a standard line module.
AnimatedWeigh and dimension station (Parcel Depot and Sorting Hall)
In line weighing and cubing station on a 2 m belt module: a recessed weigh deck on four load cells, a slim light curtain gantry reading the parcel's height and width, and a pedestal display facing the operator.
Conveyor leg and support frame (Parcel Depot and Sorting Hall)
Standalone galvanised support trestle 0.9 m wide and 0.7 m tall with a bolted top channel, a diagonal brace each side and levelling feet, for carrying a conveyor module across a gap or picking up a joint between two runs.
AnimatedDiverter arm conveyor unit (Parcel Depot and Sorting Hall)
Powered 2 m belt module with a pivoting diverter arm over it: a grey drive head on the side guide, a yellow banded paddle that sweeps parcels across the belt, and a side port at 0.76 m so a sorting chute lands under the discharge.
AnimatedGravity roller conveyor, 2 m section (Parcel Depot and Sorting Hall)
Unpowered roller bed 2 m long on the same frame, legs and ports as the powered modules: seven galvanised rollers at 0.28 m centres, each turning on its own axis, for a hand fed spur off a sorting line.
AnimatedPowered belt conveyor, 2 m straight (Parcel Depot and Sorting Hall)
Straight powered parcel conveyor module 2 m long and 0.9 m wide with its belt top at 0.76 m: a grey frame on charcoal legs with levelling feet, galvanised side guides and a turning drum at each end. Ports at both ends so a line repeats.
AnimatedPowered belt conveyor, 4 m straight (Parcel Depot and Sorting Hall)
The same powered conveyor at 4 m, for a long run down a sorting hall with fewer joints. Identical width, belt height, legs and end drums, ported on its own half length.
AnimatedIncline belt conveyor, 1.5 m rise (Parcel Depot and Sorting Hall)
Cleated incline conveyor climbing 1.5 m over a 3 m run at 26.6 degrees, feeding a sorting line from a lower infeed. Grey frame, charcoal cleats across the belt, adjustable legs and a turning drum at each end.
Powered belt conveyor, 90 degree curve (Parcel Depot and Sorting Hall)
Quarter turn belt module on a 1 m centre line radius, turning a sorting line 90 degrees to the left. It enters running toward -Z and leaves running toward -X, on the same 0.76 m belt height and the same end ports as the straights.
University Teaching Floor (University Lecture Hall and Campus)
A working university teaching floor: a six tier raked lecture theatre of bench desk rows and stepped aisle facing a projection screen, whiteboards and a lectern under a ceiling projector; a corridor of lockers, noticeboards, benches and a drinking fountain; a teaching...
Corridor Panel Radiator (University Lecture Hall and Campus)
A 1.2 m double panel corridor radiator on wall brackets at 120 mm: finned panels with a top grille, a thermostatic head one end and a lockshield the other.
Campus Planter with Foliage (University Lecture Hall and Campus)
A 470 mm tapered planter with a soil disc and nine broad leaf blades, for softening a corridor, an atrium or a break-out space.
Teaching Floor Stair Flight with Handrail (University Lecture Hall and Campus)
A 1.4 m wide half flight of eight risers climbing 1.4 m: vinyl treads with marked nosings on closed strings, a landing nib at the top and a tube handrail over a glazed balustrade.
Suspended Ceiling Light Panel (University Lecture Hall and Campus)
A 1.2 m by 600 mm suspended light panel: a brushed tray with a flat diffuser, two gear boxes and a pair of suspension wires with ceiling rosettes 440 mm above the origin.
Teaching Floor Tile, Wayfinding Colour (University Lecture Hall and Campus)
The same 2.4 m floor module with the seam border in the wayfinding colour, for marking a route, a threshold or a break-out zone.
AnimatedTeaching Room Door Module with Room Number Sign (University Lecture Hall and Campus)
A 1.2 m by 2.8 m wall module with a 920 mm teaching room door: a lined opening, a hinged leaf with a vision panel, lever handles both sides and a kick plate, and a room number sign on the wall beside it.
Teaching Floor Vinyl Tile Module (University Lecture Hall and Campus)
A 2.4 m square raised floor module in grey vinyl with a welded seam border and a lighter inlaid field, 50 mm thick, for laying a whole teaching floor.
Corridor Drinking Fountain and Bottle Filler (University Lecture Hall and Campus)
A 1.24 m stainless corridor drinking fountain with a bowl and bubbler, a push pad and a recessed bottle filler with an indicator plate.
Corridor Bench (University Lecture Hall and Campus)
A 1.6 m corridor bench: five timber slats on a welded steel frame at 450 mm, for a teaching floor circulation space.
Corridor Wall Module with Glazed Panel (University Lecture Hall and Campus)
A 1.2 m by 2.8 m corridor wall module with a glazed borrowed light over the dado: a plastered leaf with a dark skirting, a lined reveal and a brushed head channel.
AnimatedThree Stream Recycling Station (University Lecture Hall and Campus)
A three stream recycling station at 980 mm: paper, mixed and general bins on a common base rail, each with a coloured hinged lid, a shaped aperture and a signage panel.
AnimatedStudent Locker Bank, Eight Door (University Lecture Hall and Campus)
A 1.44 m student locker bank: two tiers of four doors on a recessed plinth, each leaf with a pull, a cam lock, louvred vents and a coloured number plate.
AnimatedCampus Vending Machine (University Lecture Hall and Campus)
A 920 mm glazed front vending machine: four decks of spirals and product behind a full height hinged glass door, with a keypad column, a coloured header and a delivery bin.