3D Assets
@3dassets
Dc Cable Tray Corner (Wind and Solar Energy Farm)
A right angle corner in the DC cable tray, turning a run from the row into the inverter: the same ladder section and deck height as the straight, ported on both legs.
Dc Cable Tray Straight (Wind and Solar Energy Farm)
A 2 m run of DC cable tray on stub posts: a galvanised ladder tray with its rungs, carrying a bundled cable loom, ported at both ends so runs chain across a site.
Panel Cleaning Brush (Wind and Solar Energy Farm)
A telescopic panel cleaning brush in its floor stand: a 3 m steel pole with a yellow grip and a soft 0.6 m brush head, the tool a solar site is swept with.
AnimatedString Combiner Box (Wind and Solar Energy Farm)
A DC string combiner box on two posts: a 1 m grey enclosure with a drip hood, four cable glands underneath and a front door that opens on its own hinge.
Ground Screw Pile Footing (Wind and Solar Energy Farm)
A helical ground screw footing for a solar frame: a 0.9 m steel shaft with three helix flights and a bolted head plate, the foundation a ground mount array is driven into.
Roof Mount Panel Pair (Wind and Solar Energy Farm)
A pair of roof mounted modules on a ballasted rail frame: two panels at a shallow 12 degree tilt on concrete ballast blocks, for a cabin, office or barn roof.
AnimatedSolar Inverter Cabinet (Wind and Solar Energy Farm)
A string inverter cabinet: a 2.1 m grey enclosure on a plinth with a rain hood, cooling louvres, a hazard plate and two front doors that swing open on their own hinges.
AnimatedSolar Tracker Row (Wind and Solar Energy Farm)
A single axis tracker row: four modules clamped to a 9.4 m torque tube on three piers, with the drive cabinet at the end. The whole row tilts about the tube as one node.
Solar Panel Module (Wind and Solar Energy Farm)
One ground mounted photovoltaic module on its own steel frame, tilted 28 degrees on four feet, with the junction box behind it. Ported left and right so any number repeat into an array row.
AnimatedTurbine Transport Trailer (Wind and Solar Energy Farm)
A low loader trailer section for turbine parts: an 11 m deck on a gooseneck with a kingpin plate, two wheeled axles that roll, yellow stanchions and a red rear marker board.
Turbine Blade On Cradle (Wind and Solar Energy Farm)
A 12 m turbine blade lying on its two yellow transport cradles, root can forward and red tip marker aft: the load a blade arrives on site as.
AnimatedVertical Axis Wind Turbine (Wind and Solar Energy Farm)
A 5 m vertical axis wind turbine on a cast base: three straight white aerofoil blades held off a steel spindle by struts, turning about the mast. The machine for a yard or a roof where a rotor cannot go.
AnimatedMet Mast With Instruments (Wind and Solar Energy Farm)
A 21 m triangular lattice met mast: braced legs on three pad feet, instrument booms carrying a wind vane, a radiation shield and a logger cabinet, and a cup anemometer that turns at the top.
Turbine Tower Base Section (Wind and Solar Energy Farm)
The bottom 4.4 m can of a turbine tower: a white tapered section on its charcoal flange, with the access doorway, an internal ladder strip and the bolted top flange left open for the next section.
AnimatedTurbine Access Door Panel (Wind and Solar Energy Farm)
The access door panel from a turbine tower base: a white wall section with a steel canopy, warning plates and a grey steel leaf that swings open on its own hinge node.
Turbine Foundation Pad (Wind and Solar Energy Farm)
The reinforced concrete foundation a turbine stands on: a 9.2 m octagonal pad stepped up to a plinth, with the charcoal anchor ring and its sixteen bolts left exposed for the tower flange.
AnimatedWind Turbine Tower (Wind and Solar Energy Farm)
A three blade utility wind turbine: a 28 m tapered white tower on a base collar, a nacelle with its yaw ring and cooling face, and a 24 m rotor that turns about the nacelle axis.
AnimatedTurbine Nacelle and Hub (Wind and Solar Energy Farm)
The nacelle and hub of a utility turbine sat on its yellow transport cradles at ground level, with three blade root cans on the hub and the rotor still free to turn.
AnimatedFarm Scale Wind Turbine (Wind and Solar Energy Farm)
A farm scale three blade turbine, 12.5 m to the hub with an 11 m rotor: the machine a single farm, depot or island grid runs, at about half the tower of the utility model.
Two bay repair garage and test lane (Car Repair Garage and MOT Workshop)
A working car repair garage 16 m by 12 m: marked concrete bay tiles inside clad walls and clerestory glazing, with the roller shutter in the right hand wall. The two post lift stands raised over the back bay under its extraction reel, with the bench and vice, the parts...
Crate of oil bottles (Car Repair Garage and MOT Workshop)
Blue stacking crate holding six five litre oil bottles: moulded handles and a slotted base on the crate, each bottle with a shoulder, a charcoal cap and a blank cream label.
Job calendar board (Car Repair Garage and MOT Workshop)
Wall planner board: a cream writing surface in a charcoal frame with a month grid ruled across it, five red and blue magnets, a pen tray and a marker lying in it.
Twenty litre jerrycan (Car Repair Garage and MOT Workshop)
Pressed steel jerrycan in green: the X ribbed sides, three carry handles across the top, a cam lock cap and a pouring spout clipped to the side, 0.47 m tall.
Workshop wall clock (Car Repair Garage and MOT Workshop)
Plain round wall clock: a charcoal case with a cream dial, twelve tick marks, three hands and a domed glass, 0.34 m across.