Free models · Game-ready GLB
Animated
Every low-poly modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
183 free GLB models
Camp Gate with Blank Sign Board (Safari Camp and Bush Lodge)
A 3.6 m camp entrance: two heavy timber posts under a lintel, a hanging sign board left blank on both faces to letter, and a 2.5 m braced gate hung on the left post. The gate is one node and swings on the clip. Meets the pole and wire fence on the same ports.
Spotting Scope on a Tripod (Safari Camp and Bush Lodge)
A 1.45 m spotting scope on a timber tripod: a straight body with an objective bell, an eyepiece, a focus wheel and a pan arm. The scope and head are one node and pan on the clip; the focus wheel does not turn.
Camera on a Tripod (Safari Camp and Bush Lodge)
A 1.65 m camera tripod with braced legs, a pan head and a generic long lens camera on it. The head, arm and camera are one node and pan on the clip; the legs do not extend.
Open Game Drive Vehicle (Safari Camp and Bush Lodge)
A 4.9 m open sided game viewing vehicle: a blank panelled olive body, an open windscreen frame, three stepped bench rows under two roll hoops, a rear step and four 0.84 m wheels. Invented shapes, no marque or livery. The wheels are nodes on their axles and roll on the clip.
Skid Mounted Water Bowser (Safari Camp and Bush Lodge)
A 2.2 m water bowser: a 1.1 m diameter tank in two steel cradles on a towable skid with a hitch, a filler hatch on top and an outlet with a gate tap at the back. The tap handle is one node and turns on the clip; the water is not modelled.
Camp Battery Box (Safari Camp and Bush Lodge)
A 0.9 by 0.6 m vented steel battery box on a timber pallet base, 0.58 m high, with side handles, a cable gland on the front and a lid hinged along the back. The lid is one node and lifts on the clip.
Kitchen Boma with Grill and Hanging Pot (Safari Camp and Bush Lodge)
A 3.4 by 2.6 m bush kitchen: a split pole screen on three sides with the front open, a stone kerbed hearth under a steel grill, and a pot hung from a swung out timber arm. The pot is one node on its hook and swings on the clip; the screen and grill are static.
Camp Drinks Cooler (Safari Camp and Bush Lodge)
A 0.86 by 0.5 m hard cool box 0.54 m high with moulded side handles, a front latch and a lid hinged along its back edge. The lid is one node and lifts on the clip.
Large Thatched Rondavel (Safari Camp and Bush Lodge)
A round bush guest hut 5.2 m across with rendered earth walls 2.5 m to the eaves, a timber door frame and a conical thatch roof on a timber eaves plate. The plank door swings on its jamb; the thatch is a solid cone and does not move. Exterior model: there is no interior.
Small Thatched Rondavel (Safari Camp and Bush Lodge)
A round bush guest hut 3.8 m across with rendered earth walls 2.2 m to the eaves, a timber door frame and a conical thatch roof on a timber eaves plate. The plank door swings on its jamb; the thatch is a solid cone and does not move. Exterior model: there is no interior.
Long Drop Hut (Safari Camp and Bush Lodge)
A 1.3 by 1.4 m canvas and timber long drop standing 2.05 m to its plate, under a small eight sided thatch cap, with a vent gap over the door and a boarded door on the near jamb. The door is one node on its hinge; the thatch does not move.
Bucket Shower Frame (Safari Camp and Bush Lodge)
A 2.5 m timber bucket shower: two splayed A frames under a head beam, a galvanised bucket and rose slung on a trunnion, a slatted duckboard and canvas screens on two sides. The bucket is one node and tips forward on the clip; the screens do not move.
Large Canvas Safari Tent on Deck (Safari Camp and Bush Lodge)
A 3.2 by 3 m cream canvas ridge tent on a 4 by 3.8 m boarded deck raised 0.34 m on stump piers, with a 2.5 m ridge, a pegged guy rope at each corner and two door flaps on the doorway jambs. The flaps are the only moving parts; the canvas is solid.
Small Canvas Safari Tent on Deck (Safari Camp and Bush Lodge)
A 2.4 by 2.4 m cream canvas ridge tent on a 3.1 by 3.1 m boarded deck raised 0.34 m on stump piers, with a 2.2 m ridge, a pegged guy rope at each corner and two door flaps on the doorway jambs. The flaps are the only moving parts; the canvas is solid.
Site Pickup (Radio Telescope Array and Field Station)
The station pickup: a plain double cab body with a dropside bed, a light bar over the cab and four wheels that roll on their own nodes.
Perimeter Gate (Radio Telescope Array and Field Station)
The vehicle gate in the perimeter fence: two mesh leaves on their own hinge posts under a head rail, each swinging out of the opening on its own node.
Yard Forklift (Radio Telescope Array and Field Station)
The station forklift: a counterbalance truck with a canopy and a two stage mast, whose carriage and forks lift on their own node and whose four wheels roll.
Spares Rack (Radio Telescope Array and Field Station)
The spares rack from the store: an open steel frame of four shelves with three shallow drawers that pull out and blank part boxes stood on the top shelf.
Mess Cabin (Radio Telescope Array and Field Station)
The crew mess: a wide portable unit with three windows, a roof mounted cooling unit and a flue, and a bench table on a hardstanding outside the door.
Bunk Cabin (Radio Telescope Array and Field Station)
Sleeping accommodation for a remote shift: a portable unit with small windows on three sides, a water tank cradle on the roof and a hinged door onto a step slab.
All Sky Camera Dome (Radio Telescope Array and Field Station)
The all sky camera on its cabinet: a weatherproof base with the equipment door on the front and a rotating dome with a dark window that turns on its own node.
Site Office Cabin (Radio Telescope Array and Field Station)
The station office: a six metre portable unit on a plinth with a wide window, a canopy over the entrance step, an air conditioner on the roof and a hinged door.
Battery Shed (Radio Telescope Array and Field Station)
The battery room for the station: a ventilated white unit with intake slots across the front, a roof extract unit and a hinged door.
Weather Mast with Anemometer (Radio Telescope Array and Field Station)
A five metre lattice weather mast carrying a three cup anemometer that turns on its own node, a radiation shielded temperature probe and the logger box at the foot.