Free models · Game-ready GLB
Modern
Every realistic modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
9,627 free GLB models
AnimatedLocked Chest with Hasps (Escape Room and Puzzle Venue)
A 940 by 560 mm banded timber chest 620 mm tall: a coopered lid on its back edge, steel bands round the carcass, brass corner shoes, two hasps on the lid and a padlock through the centre staple. The lid lifts on its hinge; the padlock is modelled closed and stays closed.
AnimatedStudy Desk with Ledger and Quill (Escape Room and Puzzle Venue)
A 1.16 m walnut writing desk with a teal leather top, one drawer on its own slide, and the props on it: an open ledger with plain ruled pages, an inkpot with a quill in it and a brass desk lamp. The ledger, quill and lamp are fixed; the drawer runs out and back.
Map and Pin Board (Escape Room and Puzzle Venue)
A 980 by 740 mm walnut framed board with an abstract chart on it: blocks of land, two plotted routes in red and four brass map pins. The chart is deliberately abstract, never a real coastline or a readable label, so it suits any theme. Static geometry.
UV Mark Panel with Torch (Escape Room and Puzzle Venue)
A 660 by 880 mm framed wall panel with abstract marks that only show under a lamp, and the lamp itself on a brass clip beside it: a dark barrel with a violet lens and a brass collar. The marks are plain blocks and strokes, never readable text, and nothing on it moves.
Sliding Tile Puzzle Frame (Escape Room and Puzzle Venue)
A 460 mm brass framed sliding tile puzzle on a small walnut easel: fifteen walnut tiles with plain cream faces in a four by four tray, one space empty. The tiles stay put, because fifteen sliding nodes would be fifteen channels nobody reads at card size.
AnimatedWeighing Scale Puzzle Plinth (Escape Room and Puzzle Venue)
A 1.29 m tall balance on a tapered walnut plinth: a brass beam on a knife edge carrying two steel pans, with two cast weights on the plinth top. Beam and pans are one node and rock together, which is what a real balance does; the weights are not rigged.
Wire Patch Panel (Escape Room and Puzzle Venue)
A 740 by 520 mm patch panel in a dark case with a walnut face: ten brass jack sockets in two rows, four steel plugs seated in them and two coloured leads looped between. The leads are modelled in one fixed loop, because a flexible run cannot be rigged.
AnimatedThree Lever Wall Panel (Escape Room and Puzzle Venue)
A 940 by 580 mm timber board carrying three throw levers in brass quadrants, their knobs in red, green and brass so a clue can name one without naming a number. Each lever is its own node on the quadrant spindle and tips through its slot; the board is fixed.
AnimatedPipe and Valve Puzzle Board (Escape Room and Puzzle Venue)
A 1.3 by 1.66 m floor standing valve board: three runs of flanged pipework on a braced steel frame, three handwheels in red, green and brass on their own spindles, and two brass cased gauges with plain cream dials. Each wheel spins; the pipework and the needles are fixed.
Numbered Keypad Wall Plate (Escape Room and Puzzle Venue)
A 160 by 240 mm keypad on a brass wall plate: twelve domed keys in a three by four grid, a narrow lit status window and a red state lamp. The keys are modelled proud and unmarked and nothing on it moves, because a code entry is the venue software rather than the geometry.
AnimatedKey Safe with Combination Dial (Escape Room and Puzzle Venue)
A 260 by 340 mm wall mounted key safe: a dark case with brass capping rails, a 144 mm combination dial on its own spindle with a red index mark, and three keys on the bar below the cover. The dial turns; the cover is fixed, because the keys behind it are the reward.
Combination Padlock, Large (Escape Room and Puzzle Venue)
The same combination padlock at 96 mm, the size that closes a chest, a gate hasp or a prop cage. Shackle closed and static.
Combination Padlock, Small (Escape Room and Puzzle Venue)
The same combination padlock at 42 mm, the size that closes a small box, a cash tin or a locker hasp. Shackle closed and static.
Combination Padlock (Escape Room and Puzzle Venue)
A 62 mm brass bodied combination padlock: a steel shackle through the case and four coded barrels with index bands across the face. The shackle is modelled closed and stays closed, because a lock that falls open is no longer a puzzle.
Venue Corridor Wall Module (Escape Room and Puzzle Venue)
A 1.2 by 2.6 m corridor wall module on the same grid as the puzzle room walls: painted over a teal dado band with a brass capping rail and a blank brass module plate, dressed on both faces. Runs the circulation and the front of house between the themed rooms.
Countdown Timer Display Panel (Escape Room and Puzzle Venue)
A 860 by 340 mm timer board for over a room door: six seven-segment digits and two colon dots in red on a dark face, under a brass capping. The segments are lit geometry in one fixed pose, not a readable time, and the board is bolted to the wall, so it does not move.
AnimatedHint Screen Wall Panel (Escape Room and Puzzle Venue)
A 860 by 500 mm hint screen on a wall bracket, the display a games master pushes a clue to: a bezelled case with a lit panel and a status strip, hung on a tilting head. The face is an abstract lit panel, never readable text, so it suits any theme.
Countdown Wall Clock (Escape Room and Puzzle Venue)
A 380 mm brass cased wall clock for a themed room: a cream dial with plain hour marks, a red countdown arc on the last quarter and two hands on a brass boss. The hands are modelled in one fixed position, because a game clock is counted down by the venue software.
Room Ceiling Panel with Camera Dome (Escape Room and Puzzle Venue)
A 1.2 m square ceiling module on an alloy tee grid: a painted tray panel with a smoked camera dome on its collar and a brass speaker grille, both hanging 90 mm below the face. Ports on the four edges run a ceiling over any room built from the wall modules.
AnimatedFalse Bookcase Door (Escape Room and Puzzle Venue)
A 1.2 m walnut bookcase that is the door out of a study: five shelves of abstract books and a brass candlestick catch on a case 1.08 m wide, on a concealed hinge in its own lining, so the whole case swings out of the wall. Book spines are plain blocks, never readable titles.
Pressure Plate Floor Tile (Escape Room and Puzzle Venue)
The same 1.2 m floor tile with a 660 mm steel pressure plate in a brass surround set into it and a red state lamp at one corner. The plate travels 8 mm in use, which is too little to read as a clip, so it ships static.
Puzzle Room Floor Tile (Escape Room and Puzzle Venue)
A 1.2 m square floor tile 54 mm thick: a dark deck carrying a walnut board face with four brass corner studs. Ports at the four edge midpoints tile a room, a corridor or a whole venue in both directions.
AnimatedPuzzle Room Wall, Hidden Panel Section (Escape Room and Puzzle Venue)
A panelled wall module with a 700 by 1100 mm section that is really a door: a concealed hinge on its left stile, a brass finger pull and a lined recess behind it with a key bar. Closed it is one more panel in the lining. Same ports as the plain module.
AnimatedPuzzle Room Door Module (Escape Room and Puzzle Venue)
A 1.2 by 2.6 m wall module with an 800 by 2050 mm doorway in it: a framed timber leaf on a brass lever handle with a glazed vision port in a brass surround, a magnetic lock and armature plate at the head with its status lamp, and a closer arm. Same wall ports as the plain module.