Free models · Game-ready GLB
Exterior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,062 free GLB models
Three Step Concrete Stair Set (Skate Park and Street Sports)
A 2.4 m wide poured stair of three 180 mm risers and 320 mm goings with a 0.5 m top landing and painted nosings. The top port meets a raised pad edge and the rail ports take the matching handrail.
Kinked Grind Rail (Skate Park and Street Sports)
A 3 m round steel rail that kinks up at both ends, the street handrail shape, on two splayed painted A frames.
Flat Grind Rail (Skate Park and Street Sports)
A 3 m round steel grind rail 0.4 m above the ground on two splayed painted A frames with bolted footplates.
Steel Edged Grind Box (Skate Park and Street Sports)
A 2.4 x 0.55 m concrete grind box 0.45 m tall with chamfered top corners, a steel angle capping each grinding edge and a painted band down each side.
Concrete Ledge Block (Skate Park and Street Sports)
A 1.6 x 0.6 m precast ledge 0.4 m tall with one chamfered grinding edge and a sprayed paint band on the face. Drops straight onto the pad.
Funbox with Grind Rail (Skate Park and Street Sports)
The funbox with a 3.4 m steel grind rail standing 0.3 m above its deck on two posts. Same footprint and the same end ports.
Concrete Funbox (Skate Park and Street Sports)
A 4 m wide funbox: a 2.8 m flat deck 0.6 m up with a bank at each end and painted steel edging on both top lips. Boxes butt end to end along the 4 m grid.
Portable Launch Ramp (Skate Park and Street Sports)
A 1.2 m wide kicker 0.5 m tall over a 1.5 m run, with a curved face and a steel lip bar. Small enough to carry out and drop anywhere on the pad.
Concrete Bank Ramp (Skate Park and Street Sports)
A 4 m wide flat bank rising 0.9 m over a 3 m run, with a painted top edge and a 1 m deck. 4 m front to back, so the deck meets a raised pad block on the 4 m grid; the pad port sits on the low edge.
Half Pipe Mini Ramp Section (Skate Park and Street Sports)
A 4 m wide section of a 1.4 m mini ramp: two facing transitions on a poured floor slab, a 2.4 m flat bottom, coping pipes on both lips and 0.4 m decks. Sections butt end to end to make a ramp of any width.
Flat Concrete Ground Tile (Skate Park and Street Sports)
A 4 x 4 m poured concrete pad tile, 150 mm thick, with two shallow saw cut joints across it. Tiles butt edge to edge on the 4 m grid to lay a skate park floor of any size.
Concrete Quarter Pipe Ramp (Skate Park and Street Sports)
A 4 m wide quarter pipe with a 1.6 m transition, a steel coping pipe on the lip and a 0.7 m deck behind it. Rides toward -Z; the pad port sits on the front edge on the 4 m grid.
Raised Pad Block (Skate Park and Street Sports)
A 4 x 4 m concrete plinth 0.9 m tall with a proud capping slab and a painted edge band, the raised plaza a street stair set drops off. Blocks tile on the 4 m grid and the top ports take a stair set.
Course Parasol (Golf Course and Clubhouse)
A 2.5 m parasol with a red and white segmented canopy 2.4 m across on a timber pole and a weighted base, for a terrace table.
Course Tree (Golf Course and Clubhouse)
A 4.4 m parkland tree with a forked trunk and a soft rounded canopy, for framing a fairway or a terrace.
Picnic Table (Golf Course and Clubhouse)
A 1.9 m timber picnic table with benches built into its splayed A frame, for a clubhouse terrace or a halfway hut.
Shrub Clump (Golf Course and Clubhouse)
A low clump of four shrubs about 1.9 m across, for a hazard margin, a tee surround or the foot of a wall.
Spectator Rope And Stakes (Golf Course and Clubhouse)
A 4 m run of gallery rope on three white stakes, the red rope hanging in two swags between them.
Flag Pin Set (Golf Course and Clubhouse)
A greenkeeper bin of four spare pins leaning out of it, two red flags and two white, for changing holes.
Sprinkler Head (Golf Course and Clubhouse)
A pop up sprinkler head set flush in a 0.3 m collar of turf, shown risen with its nozzle turned out.
Sand Rake (Golf Course and Clubhouse)
A 1.76 m bunker rake standing on its head: a white plastic head with nine teeth on a timber handle with a red grip.
AnimatedGreens Mower (Golf Course and Clubhouse)
A walk behind greens mower 1.35 m long: a red engine deck, a white grass box on the front, a raised handle bar and rollers front and rear that turn together.
Practice Net (Golf Course and Clubhouse)
A 6 by 2.6 m practice net on a charcoal frame, netted across the back, both sides and the top, open towards positive Z where the player stands.
AnimatedRange Ball Dispenser (Golf Course and Clubhouse)
A driving range ball dispenser: a white cabinet on legs with a card reader panel, a hopper of balls on top and a delivery drawer that slides out at the front.