Free models · Game-ready GLB
Modern
Every realistic modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
10,121 free GLB models
Tumulus Mound (Volcano and Lava Fields)
Pressure blister in a cooled flow: a three metre dome of crust pushed up from below and split along its crest, with the molten core showing through the cleft.
Lava Flow Channel Curve (Volcano and Lava Fields)
Quarter turn of an open lava channel across one four metre tile, carrying the molten stream from the back edge round to the right hand edge between chilled levees.
Crater Floor Module (Volcano and Lava Fields)
Four metre crater floor tile of shattered black crust over a bed of fallen blocks, cut by two glowing ground cracks and dusted with fresh ash.
Lava Flow Channel Straight (Volcano and Lava Fields)
Four metre straight run of an open lava channel: a 1.4 m molten stream between two chilled levees of piled crust, with the flow surface set below the levee tops.
Lava Lake Surface Plate (Volcano and Lava Fields)
Four metre plate of an active lava lake: a molten surface broken into drifting crustal rafts with glowing spreading lines between them and a chilled rim against the shore.
Cone Flank Module, Steep (Volcano and Lava Fields)
Four metre cinder covered flank tile of a volcanic cone rising 3.1 m across the module, about 38 degrees, with scattered bombs and blocks on the slope.
Cone Flank Module, Medium (Volcano and Lava Fields)
Four metre cinder covered flank tile of a volcanic cone rising 1.9 m across the module, about 25 degrees, with scattered bombs and blocks on the slope.
Crater Rim Section (Volcano and Lava Fields)
Four metre section of a crater rim: a welded spatter ridge 2.6 m high with a steep inner wall dropping away toward the crater and a rubble strewn outer slope.
Cone Flank Module, Shallow (Volcano and Lava Fields)
Four metre cinder covered flank tile of a volcanic cone rising 0.9 m across the module, about 13 degrees, with scattered bombs and blocks on the slope.
Fish market and trawler quay at landing time (Fish Market and Trawler Quay)
A working fish quay in the middle of a landing. A steel stern trawler lies alongside in three sections with her wheelhouse, whaleback, gantry and net drum aboard and the stern ramp down over her slipway, held off by fender runs with a brow across to the quay. Ashore, the...
Buoy rack (Fish Market and Trawler Quay)
A steel rack of marker gear: four dan buoys with their staffs and flags in the rack's hoops, three spare floats on the lower rail and a bolted foot each end.
Net mending frame (Fish Market and Trawler Quay)
The frame a net is mended on: two raking steel posts on foot plates, a timber head bar and a lower rail, a lattice panel of net laced across them and a needle box on the ground.
Net pile with floats (Fish Market and Trawler Quay)
A trawl net heaped on the quay: overlapping folds of solid netting about 3 m across with float clusters worked through it, a coil of line beside it and a ring of leadline on the ground.
Lobster and crab holding tank (Fish Market and Trawler Quay)
A glazed holding vivier on a stainless frame: a 2.2 m tank with a water level worked into it, a mesh lid on its corner posts and a pump and chiller stack with its pipe run at one end. The tank is empty of livestock.
Single creel (Fish Market and Trawler Quay)
One parlour creel on its own, for dressing a corner or laying a run along a quay edge without a whole stack.
Creel stack (Fish Market and Trawler Quay)
Four parlour creels stacked as they come off a boat: timber base frames with weighted bars, bowed steel hoops, a netted shell over each and a marker toggle, each pot turned a little on the one below.
Bait barrel (Fish Market and Trawler Quay)
A coopered timber barrel with three steel hoops and a bellied stave profile, its lid leaning against it, as bait and salt are kept on a working quay.
Wash down point (Fish Market and Trawler Quay)
The quayside wash down station: a standpipe with its valve and blank gauge head, a lance in its clip, a hose tail and a bunded drain surround with a stainless grating.
AnimatedWall hose reel (Fish Market and Trawler Quay)
A wall mounted wash down hose reel: a bracket plate and spindle carrying a drum wound with hose, a crank handle and the lead off to the standpipe. The drum is rigged to turn.
AnimatedOffal bin on castors (Fish Market and Trawler Quay)
A wheeled waste bin with tapered sides, a reinforcing rib, four castors and a blank hazard panel, with a lid hinged along its back edge that lifts.
Gutting table (Fish Market and Trawler Quay)
A 2.4 m stainless gutting table falling toward a waste hole and its stub chute, with a rinse manifold and jets along the back upstand, side and back walls and two boards on the deck.
AnimatedCounterbalance forklift (Fish Market and Trawler Quay)
A yard forklift: a counterweighted chassis with an overhead guard and seat, a duplex mast whose carriage and forks lift, an engine bonnet that opens and four wheels rigged to roll.
AnimatedHand pallet truck (Fish Market and Trawler Quay)
A hand pallet truck with its forks, entry rollers, pump unit and tiller arm, in the yard's safety yellow. The steer wheel and both fork rollers are rigged to roll.
AnimatedFish barrow (Fish Market and Trawler Quay)
The two wheeled barrow a market runner moves boxes on: a flared stainless tray on a tube frame with handles and a stand leg, loaded with ice and three display fish. Both wheels are rigged to roll.