Free models · Game-ready GLB
Realistic
Every realistic model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
12,634 free GLB models
Compact laboratory module (Space Station and Docking Bays)
A 7.2 m short-body laboratory module on the same hatch grid, with one pair of experiment canisters, a shorter radiator and fewer rail runs for tight station layouts.
Four-port station node (Space Station and Docking Bays)
A 3.6 m pressurised connecting node with forward, aft, port and starboard hatch ports on machined stubs, a zenith avionics box, grapple fixture, low-gain antenna and EVA translation rails.
Cupola observation module (Space Station and Docking Bays)
A seven-window observation cupola, 3.1 m across the body and 3.7 m across the open shutters, that berths on a nadir hatch: a round centre pane, six angled side panes in machined frames and six external shutters opened on named hinge nodes.
Research laboratory module (Space Station and Docking Bays)
An 11.2 m pressurised laboratory module: 4.2 m diameter hull with hatch ports at both ends, a zenith payload platform carrying two experiment canisters, two viewports, a deployed body radiator and full-length EVA rails.
Six-port pressurised hub (Space Station and Docking Bays)
A 4.1 m six-port hub with forward, aft, port, starboard, zenith and nadir hatches on machined radial stubs, diagonal gusset structure between the stubs and four EVA rail runs.
Crew habitation module (Space Station and Docking Bays)
A 9.2 m crew habitation module with a three-window nadir band, two external stowage racks on struts, standoff debris shields on the ram face, a grapple fixture and EVA rails on a white blanketed hull.
Drift run to the working face (Underground Mine and Shaft Works)
A development drift sequence: an incline ramp rising into a level run of rock, timbered and steel arch supported sections and a shotcrete lined length leading to a dead end working face, with the drilling jumbo set up at the face, a roof bolter behind it and ventilation duct...
Shaft bottom station (Underground Mine and Shaft Works)
A shaft bottom station: the lined station chamber with the shaft above, the man cage on its guides and the skip loading pocket beside it; narrow gauge track running north through a cutaway review section to a battery locomotive and two ore cars; and a widened services chamber...
Lamp room tally board (Underground Mine and Shaft Works)
A timber tally board with three rows of numbered hooks and brass check tags, a header label and a lower shelf.
Mine connector cases (Underground Mine and Shaft Works)
Independent test rows proving each connector type: drift ports joining a straight to a curve, a tee, a cross, a ramp and a widened chamber; narrow gauge rail ports joining straight and curved panels through a turnout; and ventilation duct ports joining a straight run to a bend.
Drill steel rack (Underground Mine and Shaft Works)
A steel rack of seven drill rods with thread protectors, a shelf of button bits and a stencilled length label.
Surface shaft headworks (Underground Mine and Shaft Works)
The surface headworks: the headframe standing over the shaft collar with the man cage at the deck, the winder house facing it across the rope run, the main ventilation fan house on its plinth, the tipple and cars on the loading side, and stacked timber and stores.
Mine warning sign (Underground Mine and Shaft Works)
A hazard sign on a steel post in a concrete foot, with a hatched border, a text panel and a smaller instruction plate below.
Blasting wire spool (Underground Mine and Shaft Works)
A wooden cored spool of shot firing wire on a folding steel stand, with a carrying handle and a loose lead.
Mine timber stack (Underground Mine and Shaft Works)
A cross stacked pile of sawn mine timber on bearers, strapped with steel banding and covered by a tarpaulin sheet, with a stock label.
Ore sample tray (Underground Mine and Shaft Works)
A partitioned timber sample tray holding twenty broken ore fragments with numbered labels along the front rail.
Explosives day box (Underground Mine and Shaft Works)
A lockable steel explosives day box with a hinged lid, edge banding, a hasp, a timber base and a hazard label.
Survey station and tripod (Underground Mine and Shaft Works)
A survey tripod carrying a total station over a floor spad, with a tribrach, adjustable legs, foot spikes and a marker plate.
Belt worn self rescuer (Underground Mine and Shaft Works)
A belt worn self rescuer: a sealed steel canister in a carrier with a banded seal, a release catch, an instruction label and a belt strap.
Service water line 4 m (Underground Mine and Shaft Works)
A 4 m run of 100 mm service water pipe on the same wall brackets, with a smaller isolating valve and a hose drop.
Hard hat with cap lamp (Underground Mine and Shaft Works)
A mine hard hat with a lamp bracket, a cap lamp, a coiled cord and a belt mounted battery pack.
Compressed air line 4 m (Underground Mine and Shaft Works)
A 4 m run of 180 mm compressed air pipe on wall brackets with bolted flanges, an isolating valve with a handwheel and a hose drop to a coupling.
Cable tray run 4 m (Underground Mine and Shaft Works)
A 4 m ladder cable tray on wall brackets carrying two power cables and a communications cable, with rung spacing and marker plates.
Power distribution box (Underground Mine and Shaft Works)
A flameproof power distribution box on steel skids with a bolted front cover, an isolator handle, four cable glands with trailing cables and two indicator windows.