Free models · Game-ready GLB
Modern
Every realistic modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
10,121 free GLB models
Yacht mast with boom and standing rigging (Marina and Yacht Club)
Deck stepped aluminium mast 12.6 m tall with a swept spreader pair, cap and lower shrouds, a forestay and backstay, a kicking strap, a boom on its gooseneck, mast steps and a masthead fitting with a blank wind vane.
AnimatedSloop deck module with cockpit and wheel (Marina and Yacht Club)
Aft deck section of a cruising sloop 3.6 m long: a teak cockpit sole, coamings, helm seat, a wheel on its pedestal with a blank instrument pod, two primary winches, a locker top and a stern rail. The wheel and winches turn.
Sailing yacht hull, 9.6 m (Marina and Yacht Club)
Cruising sloop hull 9.6 m long with white topsides: a moulded deck, a coachroof with hatches and sliding companionway, a teak cockpit sole, guardrails, pulpit and pushpit, and a fin keel with a lead bulb below the waterline.
Furled sail set (Marina and Yacht Club)
Sail set stowed as a boat lies on its berth: a mainsail flaked on the boom under a navy sail cover with tie straps, and a headsail rolled on its foil with a UV strip, both in plain cloth with no sail number or insignia.
Sailing yacht hull, 9.6 m, navy (Marina and Yacht Club)
Cruising sloop hull 9.6 m long with navy topsides: a moulded deck, a coachroof with hatches and sliding companionway, a teak cockpit sole, guardrails, pulpit and pushpit, and a fin keel with a lead bulb below the waterline.
Mooring pile (Marina and Yacht Club)
Steel mooring pile standing in the basin: a 0.42 m tube driven from the bed to 3.1 m above the water with a charcoal cap, a yellow band and a welded ladder rung set, for holding a pontoon run or a berth in place.
Jetty lamp (Marina and Yacht Club)
Marina jetty lamp 2.6 m tall: a galvanised column on a charcoal base with a navy shroud, a downward lantern with a frosted lens and a low level marker light, for lighting a pontoon walkway or a quay edge.
Fender set on a rail (Marina and Yacht Club)
Set of three cylindrical boat fenders 0.6 m long hung on a short galvanised rail by their lanyards, with a flat pontoon fender board behind them, for a berth face or the side of a workboat.
Pile guide collar (Marina and Yacht Club)
Galvanised pile guide for a floating pontoon: a collar bracket with four rubber rollers running on a 0.42 m pile, a bolted deck arm and a safety chain eye, so a pontoon rises and falls without moving off station.
Wash down point with hose reel (Marina and Yacht Club)
Quayside wash down post 1.3 m tall: a galvanised post on a concrete plinth with a drum hose reel, a lance in its clip, a stop tap and a drain grating at its foot, for rinsing a boat down after a lift out.
AnimatedFuel berth pump (Marina and Yacht Club)
Marina fuel pump 1.9 m tall on a bunded plinth: a yellow cabinet with a blank display panel, a charcoal hose reel, a delivery nozzle in its holster and a spill kit locker, with hazard banding. The nozzle lifts out of the holster.
Berth service pedestal (Marina and Yacht Club)
Marina service pedestal 1.25 m tall: a galvanised column on a charcoal base with two shuttered power sockets, a metered water point with a tap and hose union, a blank berth plate and a navy lit head, for the deck edge of a pontoon.
Pump out station (Marina and Yacht Club)
Holding tank pump out unit on a pontoon: a grey cabinet with a vacuum pump housing, a coiled suction hose on a reel, a deck fitting wand in a bracket, a rinse tap and a blank instruction panel, on a bunded base.
AnimatedDock box (Marina and Yacht Club)
Berth holder's dock box 1.2 m by 0.6 m: a moulded white case on a charcoal plinth with a navy lid on piano hinges, a hasp, two side handles and a blank name plate. The lid lifts.
Pontoon boarding ladder (Marina and Yacht Club)
Man overboard ladder hung on a pontoon edge: a galvanised head frame bolted to the deck, two stiles dropping 1.2 m into the water, four treads and a charcoal grab loop, with a yellow head plate.
Pontoon mooring ring (Marina and Yacht Club)
Flush mooring ring for a pontoon or a quay coping: a 160 mm galvanised ring on a lugged back plate with four countersunk bolts and a short strop through it, sitting proud of the surface by 30 mm.
Pontoon cleat with warp (Marina and Yacht Club)
Galvanised 250 mm mooring cleat on a bolted base plate with a warp dressed over it in a loose figure of eight and run off toward the berth, for the deck edge of a pontoon or a finger.
Finger berth pontoon, 6 m (Marina and Yacht Club)
Floating finger 6 m by 1.0 m dividing two berths: the same float and composite deck with a rubbing strake each side, two cleats and a rounded outboard end. A port at the root so it lands on a walkway's berth position.
AnimatedPontoon gate with keypad (Marina and Yacht Club)
Berth holders' gate at the head of a gangway: a 1.1 m galvanised frame in a two post surround with vertical infill bars, a keypad box on the closing post, a self closing arm and a blank sign panel. The leaf swings open.
AnimatedGangway with hinged ramp, 8 m (Marina and Yacht Club)
Marina access gangway: a fixed head platform flush with the quay, a hinged aluminium ramp 5.8 m long falling to the pontoon with a treaded deck and guardrails both sides, and a rubber landing shoe. The ramp tilts on its quay hinge.
Tender pontoon, 4 m (Marina and Yacht Club)
Short floating pontoon 4 m by 2.4 m for club tenders and visiting dinghies: the same float and deck with a low boarding step down one side, four cleats and a painted keep clear panel.
Floating pontoon module, 8 m straight (Marina and Yacht Club)
Floating walkway module 8 m by 2.4 m: a charcoal float with a grey composite deck 0.34 m above the water, galvanised rubbing strakes and yellow edge strips. Ports at both ends and at four berth positions on the sides.
Slipway, 6 m (Marina and Yacht Club)
Concrete launching slipway 6 m wide and 6 m long: a flat head apron level with the quay, a grooved ramp falling 1.1 m into the water and kerbs each side, for launching a dinghy or a trailer boat from a marina yard.
Floating pontoon module, tee with spur (Marina and Yacht Club)
The same 8 m floating walkway with a 1.2 m spur off one side, for the head of a gangway or a branch pontoon. Ports at both ends, at the spur head and at four berth positions.