Free models · Game-ready GLB
Animated
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
2,066 free GLB models
AnimatedPetrol disc cutter (Tool Hire Depot and Plant Yard)
Hand held petrol cut off saw 0.8 m long with a 300 mm diamond blade running in a charcoal guard that can be swung over, an orange engine casing with a recoil starter, a bar handle with a throttle and a front bale handle, standing on its guard.
AnimatedUpright floor sander (Tool Hire Depot and Plant Yard)
Belt floor sander 1.1 m tall: an orange cast body over a drum housing with a 200 mm abrasive drum that turns, a rear dust bag on its frame, two rubber road wheels and a charcoal push handle with a lift lever and a cable hook.
AnimatedCordless tool case stack (Tool Hire Depot and Plant Yard)
Stack of five stackable cordless tool cases 1.1 m tall on a charcoal dolly: orange and blue moulded bodies with recessed catches, carry handles and cream hire labels, the top case with a lid that lifts to show its battery and charger.
AnimatedTrade counter module with till, 1.5 m (Tool Hire Depot and Plant Yard)
Hire counter section 1.5 m wide and 1 m tall: a grey carcass with an orange customer fascia, a charcoal worktop with a steel nosing, a till drawer unit with a keypad and a canted screen on a post, and side ports at 0.5 m so a counter run repeats.
AnimatedSite office cabin (Tool Hire Depot and Plant Yard)
Portable site office cabin 6 m by 2.7 m on steel skids: a cream clad body with a charcoal ribbed base, three sliding windows in orange surrounds, an opening door up two steps, a roof edge rail and lifting eyes at the corners.
AnimatedDepot yard fence gate, 3 m (Tool Hire Depot and Plant Yard)
The same fence line as a single leaf gate: a mesh filled tubular leaf 2.8 m wide hung on a heavier post with a drop bolt, a latch keep and a red keep clear plate, swinging clear of the opening.
AnimatedDepot roller shutter door module, 3 m (Tool Hire Depot and Plant Yard)
Yard access module 3 m wide and 3.6 m tall: a 2.4 m by 3 m opening in ribbed grey cladding, charcoal guide channels, yellow impact posts, a shutter hood and an orange slatted curtain that lifts clear of the opening.
AnimatedDepot staff door module, 3 m (Tool Hire Depot and Plant Yard)
Personnel door module 3 m wide and 3.2 m tall: a charcoal steel door leaf 0.9 m wide in a recessed frame with a vision panel, a push bar and a kick plate, an orange over door sign and the same wall ports, so it drops into a run of cladding.
AnimatedServing Hatch Wall Module (Village Hall and Community Events)
The hall wall module with a 1.6 m serving hatch in it: a stained serving shelf running through to the hall side, a lined opening, a stainless roller shutter on eleven slats and the hood it rolls up into. The shutter is a named node and lifts straight up behind the hood.
AnimatedHall Entrance Lobby Door Module (Village Hall and Community Events)
The hall wall module with the entrance lobby pair in it: two blue leaves with tall vision panels and chrome pull handles, a stained lining and a glazed overlight above the head. The leaves hang on the hall face and swing in, so the lobby stays clear.
AnimatedHall Fire Exit Door Module (Village Hall and Community Events)
The hall wall module with a 1.6 m by 2.1 m fire exit pair in it: two green leaves on push bars in a lined opening, with a blank green exit sign over the head. The leaves hang near the outer face and swing outward, the way a fire door has to.
AnimatedBird Scarer on a Pole (Allotments and Community Garden)
A 1.9 m pole with four arms of old discs and cut plastic streamers on the head, turned by the wind over a sown bed. The head is one node on the pole, so the clip spins the whole spider; the streamers do not flutter on their own.
AnimatedCommunal Tool Store (Allotments and Community Garden)
The site's shared store: a 3 x 2 m timber building 2.3 m at the front under a corrugated pent roof, with a wide braced door and a padlock. The door is one node on its hinge stile; the roof sheets and the padlock are fixed.
AnimatedSite Gate with Padlock (Allotments and Community Garden)
A 2 m allotment site gate: a four rail braced timber leaf hung between two 1.46 m capped posts, with a hasp and a padlock on the closing stile. The leaf is one node on its hinge post, so the clip swings it; the padlock is modelled shut and does not open.
AnimatedChicken Coop with Run (Allotments and Community Garden)
A raised timber coop 1.16 m across on 0.42 m legs with a felt gable roof, a pop hole and ramp, and a 1.7 x 1.1 m netted run on the end. The nest box hatch is one node hinged on its head; the netting, ramp and pop hole are fixed.
AnimatedHose Reel on a Post (Allotments and Community Garden)
A hose reel on a galvanised bracket bolted to a 0.94 m post, wound with 0.22 m coils and a crank on the side, with the free end run off across the ground. The reel is one node on its axle so the clip spins it; the hose itself is a rigid solid and does not pay out.
AnimatedWheelbarrow (Allotments and Community Garden)
A galvanised builders barrow with timber handles, a stub axle and two leg stands, 1.5 m over the handles. The wheel is one node on the axle, so the clip rolls it; the barrow itself does not tip.
AnimatedAllotment Shed, Patched and Weathered (Allotments and Community Garden)
The same shed after a few hard winters: corrugated sheet nailed over the rotted boards, a patch on the felt, moss growing on the roof, a plank propped against the corner and the paint gone from the door. The door still opens; the propped plank and the patches are fixed.
AnimatedTimber Framed Greenhouse (Allotments and Community Garden)
A 2 x 2.6 m cedar framed greenhouse, 1.5 m to the eaves and 2.26 m to the ridge, glazed all round and over, with staging and pots inside and a side hung door. The door is the only moving part; the roof vents are fixed lights.
AnimatedHomemade Allotment Shed (Allotments and Community Garden)
A 2 x 1.6 m homemade timber shed on bearers, 2.05 m at the front falling to 1.72 m at the back under a felt pent roof, with a painted door, a glazed window and a trodden earth step. The door is one node on its hinge stile, so the clip swings it open and shut.
AnimatedSlatted Timber Compost Bin (Allotments and Community Garden)
A 1 m square timber compost bin 0.86 m high, four corner posts with slatted sides and a heap of half rotted material in it, closed by a hinged board lid. The lid is one node on the back edge; the slats are fixed.
AnimatedCold Frame (Allotments and Community Garden)
A 1.3 x 0.86 m timber cold frame, 0.52 m at the back falling to 0.3 m at the front, sown with two short rows and closed by a single glazed light. The light is one node hinged on the back board, so the clip lifts it and drops it back.
AnimatedPlastic Dalek Compost Bin (Allotments and Community Garden)
The council issue plastic compost bin: a 0.94 m tapered black cone with moulded rings, a hatch at the foot for taking compost out and a lift off lid modelled as a hinged node. The hatch is fixed geometry.
AnimatedOffcut bin (Dry Cleaners and Alterations Shop)
A 0.66 m enamelled bin with two teal bands and a pedal linkage, its hinged lid held ajar by a scrap of cloth hanging over the rim, for the side of the cutting table.