Free models · Game-ready GLB
Kit
Every stylized model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,850 free GLB models
Jet Blast Fence (Airport Terminal and Ground Operations)
Eight metre jet blast deflector fence: five braced portal posts on pad bases carrying nine angled louvre panels, a coloured capping rail with obstruction lights and a chevron kick band along the base.
Apron Paving Tile (Airport Terminal and Ground Operations)
Eight metre plain apron paving tile: the same scored slab with bay joints and a single corner reference patch and no route markings, for filling the open apron between marked stands and taxiways.
Taxiway Tile Curve (Airport Terminal and Ground Operations)
Eight metre quarter turn taxiway tile: the same slab with a curved centreline and curved double edge lines swinging a route from travel along X to travel along Z, with inset lights on the inner shoulder.
Taxiway Tile (Airport Terminal and Ground Operations)
Eight metre straight taxiway paving tile: a scored slab with a painted centreline, double edge lines and four inset edge lights, laid on the apron port grid.
Stand Marking Tile (Airport Terminal and Ground Operations)
Eight metre aircraft stand paving tile: a scored concrete slab painted with a lead-in line, a stop bar and turn bar, hatched equipment restraint areas either side, safety lines and an outlined equipment parking box.
Baggage Belt Incline (Airport Terminal and Ground Operations)
Four metre inclined baggage conveyor rising one metre: the same belt bed and guards set on a 14 degree climb, on stepped legs, for lifting a run from the make-up floor to a reclaim feed.
AnimatedBaggage Sorting Junction (Airport Terminal and Ground Operations)
Two metre baggage sorting junction: a square transfer deck with roller cleats, a fixed back guard, a hinged pusher paddle on a named pivot and a control column with a status screen, splitting a run into a straight and a right-hand branch.
Baggage Belt Curve (Airport Terminal and Ground Operations)
Quarter turn baggage conveyor: a 1.6 m radius curved belt bed with curved inner and outer guards, three support frames and a drive unit, turning a run from travel along X to travel along Z.
Terminal Floor Tile (Airport Terminal and Ground Operations)
Four metre terminal floor tile: a polished slab with an inlaid border band on all four edges and a lighter centre panel, laid on a 4 m grid to floor a concourse.
Baggage Belt Module (Airport Terminal and Ground Operations)
Four metre straight baggage conveyor module: a boxed belt bed on four legs with amber side guards, cleat lines across the belt and a drive unit slung beneath the head end.
Operating Theatre (Hospital Wards and Clinic Operations)
An 8 by 8 metre operating theatre laid out around the table: a powered operating table under a twin surgical lamp and a ceiling service pendant, with the anaesthetic workstation at the head, instrument and supply trolleys to hand, a suction unit, a two-bay scrub trough...
Reception And Waiting Hall (Hospital Wards and Clinic Operations)
A 14 by 12 metre main entrance: a curved reception counter with a queue display, six rows of beam seating in two colour-coded zones, planters, a water cooler, vending machine, information board and wayfinding totems, with the glazed entrance line opening onto a covered...
Partition Connector Cases (Hospital Wards and Clinic Operations)
Independent test assemblies for the wall-run port: a straight run joining a one metre make-up module, a glazed panel, a doorset and a glazed doorway; and a right-angle corner receiving a straight run on each arm. Every join is asserted in the pack connection list. Floor tiles...
Six Bed Ward Bay (Hospital Wards and Clinic Operations)
A 12 by 8 metre six-bed ward bay: two facing rows of three beds, each with a bedside locker, over-bed table, drip stand, vital-signs monitor, bedhead services panel and cubicle curtain, inside a partition shell with a glazed doorway. Back-of-house equipment and mobility aids...
Ward Bay Corner (Hospital Wards and Clinic Operations)
Right-angle partition corner joining a wall run along X to a wall run along Z, with a corner pier and matching skirting and dado bands.
Ceiling Light Panel (Hospital Wards and Clinic Operations)
Two metre suspended ceiling tile with a recessed linear luminaire, trim bars and a service access hatch, matching the floor grid.
Corridor Floor Tile (Hospital Wards and Clinic Operations)
Two metre vinyl corridor floor tile with a chamfered edge, an inset border band and a centre motif panel, laid on a 2 m grid.
Door Leaf (Hospital Wards and Clinic Operations)
Single door module: a lined frame with an over-panel and a hinged leaf on a named pivot, with a vision panel, pull handles both sides and a kick plate.
Glazed Partition (Hospital Wards and Clinic Operations)
Two metre glazed partition module: a solid dado panel under a full-width vision pane in a framed head, jamb and mullion set.
Glazed Partition Doorway (Hospital Wards and Clinic Operations)
Glazed partition module with a one metre clear doorway between two flanking glazed panels, for a corridor entrance without a leaf.
Partition Wall 1 m (Hospital Wards and Clinic Operations)
One metre solid partition module for closing short runs and making up bay widths.
Partition Wall (Hospital Wards and Clinic Operations)
Two metre solid partition wall module for ward and corridor layouts, with a skirting and a coloured dado band on both faces.
Connector Cases (Sci-Fi City Towers and Skyways)
Independent test assemblies covering all four port types. Two tower stacks exercise stack ports across nine section types and both crowns. A skybridge chain runs a coupling, a straight span, a four way junction pod, a glazed tube, a short span, a tee junction, a trellis span...
Three Tower Arcology Block (Sci-Fi City Towers and Skyways)
A whole arcology block: three towers stacked from podium to crown on the 8 m grid with residential, garden terrace, mechanical, atrium, cantilever, setback, spire and corner sections; three skybridge runs on the tower coupling collars including a four-way junction pod and a...