Free models · Game-ready GLB
Modular
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,316 free GLB models
AnimatedWC cubicle module, 900 mm (Office Lobby and Building Facilities)
A 900 mm WC cubicle module 2.0 m tall on 150 mm adjustable legs and 1.5 m deep: a divider panel, a front pilaster, a head rail, a rear duct panel with a flush plate and a service hatch, and a hinged door with an indicator bolt and a coat hook as a named pivoted node.
WC cubicle module, door open (Office Lobby and Building Facilities)
The same 900 mm WC cubicle module with the door swung inward through sixty-six degrees, showing the duct panel and flush plate inside.
Corridor ceiling module with air grille (Office Lobby and Building Facilities)
The same 1.2 m ceiling raft without the luminaire, closed with a plain tile and a four-way swirl supply grille.
Corridor ceiling module with lighting (Office Lobby and Building Facilities)
A 1.2 m square corridor ceiling raft 0.15 m deep: a chamfered tray in an exposed grid with a linear luminaire lens, a pendant sprinkler head and a smoke detector.
Corridor doorway module (Office Lobby and Building Facilities)
A 1.2 m corridor wall module with a lined 0.92 m by 2.1 m opening: timber linings, architraves both sides and a head trim, supplied without a leaf for a free opening.
AnimatedFire door module (Office Lobby and Building Facilities)
A 1.2 m fire door module 2.6 m tall: a hardwood frame with intumescent seal rebates, a rated leaf with a vision panel, an overhead closer arm, a kick plate and a blank keep-shut disc, all on a named node pivoted on the hinge edge.
AnimatedCorridor door module with leaf (Office Lobby and Building Facilities)
The same corridor doorway module fitted with a flush hinged leaf as a named node pivoted on its hinge edge, with a lever handle set, an escutcheon and two barrel hinges.
Stair balustrade module, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m glass balustrade module 1.1 m high: a chamfered base shoe, a laminated glass infill, a stainless handrail tube with a timber cap and two intermediate clamps.
Corridor wall module, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m corridor wall module 2.6 m tall and 100 mm thick: a chamfered leaf with skirtings both sides, a timber dado rail, a recessed services plate with two outlets and a head trim.
Lift landing door module, open (Office Lobby and Building Facilities)
The same lift landing module with both leaves parked in their pockets, the opening clear and a dark car backdrop and threshold sill behind.
AnimatedLift landing door module, closed (Office Lobby and Building Facilities)
A 1.2 m lift landing module 2.6 m tall: a stainless architrave around a 0.98 m by 2.16 m opening, a twin-track sill, a landing indicator plate and two centre-opening leaves as named nodes pivoted on their slide axes.
Reception desk end module (Office Lobby and Building Facilities)
A 1.2 m reception desk end module closing a run: the same counter section with a full-height timber return panel and a rounded stainless nose post on the open end.
Reception desk module, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m straight reception desk module: a shaped counter body with a 1.1 m bullnose timber transaction top, a 750 mm working top with a cable grommet, an accent reveal, a recessed kick and a bracketed under-counter shelf.
Perimeter Fence Run (Airport Terminal and Ground Operations)
Eight metre airfield perimeter fence bay: three posts on cast pads carrying a mesh panel with vertical wires and three line rails, angled top arms with three strand wires and a blank warning plate.
Jet Blast Fence (Airport Terminal and Ground Operations)
Eight metre jet blast deflector fence: five braced portal posts on pad bases carrying nine angled louvre panels, a coloured capping rail with obstruction lights and a chevron kick band along the base.
Apron Paving Tile (Airport Terminal and Ground Operations)
Eight metre plain apron paving tile: the same scored slab with bay joints and a single corner reference patch and no route markings, for filling the open apron between marked stands and taxiways.
Taxiway Tile Curve (Airport Terminal and Ground Operations)
Eight metre quarter turn taxiway tile: the same slab with a curved centreline and curved double edge lines swinging a route from travel along X to travel along Z, with inset lights on the inner shoulder.
Taxiway Tile (Airport Terminal and Ground Operations)
Eight metre straight taxiway paving tile: a scored slab with a painted centreline, double edge lines and four inset edge lights, laid on the apron port grid.
Stand Marking Tile (Airport Terminal and Ground Operations)
Eight metre aircraft stand paving tile: a scored concrete slab painted with a lead-in line, a stop bar and turn bar, hatched equipment restraint areas either side, safety lines and an outlined equipment parking box.
Baggage Belt Incline (Airport Terminal and Ground Operations)
Four metre inclined baggage conveyor rising one metre: the same belt bed and guards set on a 14 degree climb, on stepped legs, for lifting a run from the make-up floor to a reclaim feed.
AnimatedBaggage Sorting Junction (Airport Terminal and Ground Operations)
Two metre baggage sorting junction: a square transfer deck with roller cleats, a fixed back guard, a hinged pusher paddle on a named pivot and a control column with a status screen, splitting a run into a straight and a right-hand branch.
Baggage Belt Curve (Airport Terminal and Ground Operations)
Quarter turn baggage conveyor: a 1.6 m radius curved belt bed with curved inner and outer guards, three support frames and a drive unit, turning a run from travel along X to travel along Z.
Terminal Floor Tile (Airport Terminal and Ground Operations)
Four metre terminal floor tile: a polished slab with an inlaid border band on all four edges and a lighter centre panel, laid on a 4 m grid to floor a concourse.
Baggage Belt Module (Airport Terminal and Ground Operations)
Four metre straight baggage conveyor module: a boxed belt bed on four legs with amber side guards, cleat lines across the belt and a drive unit slung beneath the head end.