Free models · Game-ready GLB
Modular
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,072 free GLB models
Watertight Bulkhead, Open Doorway (Submarine Interior and Control Room)
The same watertight bulkhead with the door leaf removed, leaving the coamed doorway open. Use it where a compartment has to stay walkable, or as the after face of a bulkhead whose door is modelled on the far side.
Deck Plate Section, Open Grating (Submarine Interior and Control Room)
The same deck plate section decked in open steel grating instead of plate: twenty two bearer bars on seven cross bars, which is what a machinery space or a bilge access run is floored with. Shares the deck-aft and deck-fore ports.
Deck Plate Section (Submarine Interior and Control Room)
A 2 by 3 m deck plate section 140 mm deep: three transverse bearers and two edge coamings carrying a chequered steel plate. It lays the walking flat inside a hull ring section 550 mm below the centre line, and its deck-aft and deck-fore ports run the flat the length of the boat.
Pressure Hull Ring Section (Submarine Interior and Control Room)
A 2 m length of pressure hull on a 3.8 m outer diameter: a 150 mm shell, three internal ring frames with an inner face bar, twelve longitudinal stringers, two clipped cable runs and a lagged service pipe down each bilge.
AnimatedDeck Plate Section with Hatch (Submarine Interior and Control Room)
The same deck plate section built as four rails round a 780 mm opening, with a raised coaming and a dished lid hinged on its after edge.
Pressure Hull Ring Section, Cutaway (Submarine Interior and Control Room)
The same 2 m hull ring with the shell above the centre line removed and a rolled edge rail down each cut, so the frames, stringers, cable runs and bilge pipework stand as an open cage over a visible compartment.
Lantern Wire Run (Izakaya Alley and Ramen Shop)
An 8 m span of catenary wire carrying five paper lanterns, round and cylindrical alternately, built about the wire datum so its origin sits at the fixing height rather than on the ground. Ports at both ends chain a run down an alley. Hang it at about 3.4 m.
AnimatedIzakaya Front Bay (Izakaya Alley and Ramen Shop)
A 4 m izakaya frontage: a timber framed opening with a fixed lattice light, a sliding lattice leaf on its track, a plinth, a deep head beam, a four panel vermilion noren and a round lantern hung beside the door. The leaf is a named node and slides 1.5 m open.
Ramen Counter Module (Izakaya Alley and Ramen Shop)
A 2 m module of ramen bar counter: a dark timber carcass, a 620 mm timber top with a bullnose lip, a recessed kick, a tubular foot rail on the customer side and a steel put up rail on the cook side. Ports at both ends chain a counter of any length.
Ramen Shop Front Bay (Izakaya Alley and Ramen Shop)
A 4 m counter ramen shopfront: an open 3.4 m trading bay between rendered piers, a tiled stall board, a deep timber head beam, a cream fascia carrying three abstract painted marks and a three panel indigo noren hanging in the opening. Tiles into a street run.
AnimatedShopfront Shutter Bay (Izakaya Alley and Ramen Shop)
A 4 m narrow shopfront bay closed by a 3.3 m steel roller shutter in its guide rails, with a shutter box over the opening and a timber reveal behind. The shutter is a named node and runs 2.2 m up behind the fascia.
Shopfront Shutter Bay, Shutter Up (Izakaya Alley and Ramen Shop)
The same 4 m shopfront bay shipped with its roller shutter already run up behind the fascia, so a street can hold open and closed units side by side without an animation player. The shutter node is posed and stays still.
Upper Storey Balcony Bay (Izakaya Alley and Ramen Shop)
A first floor bay with a glazed sliding door onto a 1 m concrete balcony: steel balusters, a top and mid rail and a drying rail carrying three towels. The towels and the laundry are solid and static, because cloth needs a joint per fold.
Alley Roof Cap Bay (Izakaya Alley and Ramen Shop)
A 4 m parapet cap that closes the top of a wall or storey bay: a flat roof deck, a 340 mm parapet with an oversailing coping, a water tank plinth and a vent stack. Sits on the storey port below and tiles end to end.
Alley Floor Slab (Izakaya Alley and Ramen Shop)
A 4 m square of worn alley tarmac with patched joints and a concrete repair, 100 mm thick, ported on all four edges so a run of them lays one continuous surface under a shopfront street.
Alley Wall Bay (Izakaya Alley and Ramen Shop)
A 4 m by 3.2 m rendered alley wall bay with a charcoal plinth, a service band under the eaves and a glazed reveal in a dark timber frame. Tiles end to end and carries a storey or a roof cap on its top port.
Upper Storey Bay (Izakaya Alley and Ramen Shop)
A 4 m by 2.8 m first floor bay over an alley shopfront: rendered wall, a charcoal band at floor level, two sash reveals in dark timber with concrete sills and a cornice under the roof. Stacks on a wall bay and carries a cap.
Alley Kerb and Drain Section (Izakaya Alley and Ramen Shop)
A 4 m run of alley edge: a 140 mm concrete kerb with a coping, a sunken asphalt gutter and a steel gully grate set into it. Ported end to end so kerb sections chain along a shopfront run.
AnimatedShowground Fence Gate (Travelling Circus and Big Top)
The same fence bay with its infill hung as a gate leaf on the left post, so a run of fence has a way through it. The leaf is one node on the hinge stile and swings clear of the run.
Showground Fence Panel (Travelling Circus and Big Top)
A 2.5 m fence bay: white pales on two red rails between capped timber posts, 1.15 m high. Run ports at both ends carry a fence right round a pitch.
Circus Ring Kerb Segment (Travelling Circus and Big Top)
One eighth of the ring kerb: a 8 m diameter red kerb 300 mm high with a white capping, curved through 45 degrees. Eight of them attach end to end and close the circle.
Big Top Scalloped Valance (Travelling Circus and Big Top)
A 4 m run of scalloped valance, five gold tongues under a red band with a white bob on each point. It hangs at the eave over a canvas bay, and fourteen runs skirt the whole tent.
Showground Ground Tile (Travelling Circus and Big Top)
A 4 m square of trodden showground, 6 mm thick, with four low humps rolled into it. Edge ports on all four sides tile a whole field without a seam.
Big Top Canvas Bay (Travelling Circus and Big Top)
A 4 x 3.4 m red and white sidewall bay with a laced batten on each edge and timber hem and head rails. Fourteen of them close a 17.5 m ring, edge ports landing on the polygon's own vertices.