Free models · Game-ready GLB
Exterior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
8,322 free GLB models
Crawler Transporter Deck (Rocket Launch Pad and Gantry)
A 16 by 13 m crawler transporter: a levelling deck on four track units with jacking cylinders, four hold down points, railed edges, hazard striping and two blank operator cabs. Carries a launch mount or a whole vehicle stack.
AnimatedGrid Fin Set (Rocket Launch Pad and Gantry)
A 3 m forward hull section carrying four lattice grid fins stowed flat against it, each a framed grid of vanes on its own hinge fitting. The four fins deploy out to the airstream and fold back, one node each.
AnimatedTransporter Erector (Rocket Launch Pad and Gantry)
A 19 m transporter erector: an eight wheel chassis with a blank cab and a hydraulic pack, carrying a trussed erector beam on a rear hinge with four vehicle cradles and their rollers. The beam raises on its own node and the wheels roll.
Engine Cluster (Rocket Launch Pad and Gantry)
A seven engine cluster on its thrust structure: a ring beam on four posts with a cross brace, one centre bell and six round it on gimbal blocks, each with a turbopump box and propellant feed stubs. 3.7 m across, 3.4 m tall.
AnimatedLanding Leg Set (Rocket Launch Pad and Gantry)
A 4.3 m aft hull section with four landing legs stowed against it: each leg is a main strut with two side stays and a round foot pad, hinged at its own base fitting, and each deploys down and out on its own node.
AnimatedPayload Fairing Halves (Rocket Launch Pad and Gantry)
A two piece payload fairing, 7.4 m tall and 3.5 m across: an ogive shell with a modelled wall thickness, a longeron each side of the split line, internal stiffening hoops and a blank access panel. Each half hinges open outwards on its own node at the base of the split line.
Second Stage (Rocket Launch Pad and Gantry)
A 12.3 m second stage: a 3.3 m tank on a conical adapter down to the core diameter, one vacuum engine bell on its thrust block, a raceway, four attitude thruster pods and a payload interface ring on top.
Interstage (Rocket Launch Pad and Gantry)
A 3.6 m interstage barrel joining the two stages: the same 3.8 m hull, a reinforcing ring at each end, eight separation vent ports, a raceway continuation and an invented marking band.
First Stage Core (Rocket Launch Pad and Gantry)
A 24 m first stage core, 3.8 m across: a white tank barrel with a dividing ring, an aft skirt on eight thrust posts, a cable raceway with junction boxes up one flank, an umbilical plate and invented block markings. Ported base and top.
Strongback (Rocket Launch Pad and Gantry)
A 27 m strongback: a white lattice mast on a ballast foot with four vehicle cradles and their clamp pads on the front face, an umbilical raceway with insulated line boxes up the back and a base junction box.
AnimatedService Lift Cage (Rocket Launch Pad and Gantry)
A 12 m service lift: a lattice hoistway on a concrete pad with a caged car parked at the bottom landing, a gate that opens and the winch housing at the head. The car is modelled at rest and does not travel.
Catenary Wire Anchor (Rocket Launch Pad and Gantry)
A ground anchor for the lightning catenary: a ballast block with a steel frame, two sheaves, a tensioner strut and an earthing box, with a blank warning plate on the face. The wire it holds is deliberately not modelled.
Lightning Mast (Rocket Launch Pad and Gantry)
A 41 m lightning protection mast: a lattice tower on a concrete block, a narrower head section carrying the air terminal spike and the catenary arms, obstruction markers, a ladder the full height and an earth downlead box at the foot.
AnimatedFuelling Arm (Rocket Launch Pad and Gantry)
A cryogenic fuelling arm on a pivot column: a box girder carrying two insulated transfer lines out to a quick disconnect head, with a counterweight box and a handrail. The head retracts along the arm and the arm then swings away.
AnimatedCrew Access Arm (Rocket Launch Pad and Gantry)
A 9.6 m crew access arm on a pivot column: a trussed walkway with handrails leading to a white room with a sealing collar, a window and a plant box. The whole arm is one node and swings back away from the vehicle.
Gantry Stair Flight (Rocket Launch Pad and Gantry)
A standalone 6 m stair flight with stringers, footing pads, raked handrails and a grated landing at the top, for climbing between gantry decks or up onto the launch mount.
AnimatedGantry Swing Platform (Rocket Launch Pad and Gantry)
A gantry access platform on a hinge column: a 6.6 m grated deck whose two arms close round a 4 m vehicle, handrails on every free edge and raking struts back to the column. The deck is one node and swings clear about the column.
Gantry Crane Section (Rocket Launch Pad and Gantry)
The gantry tower section topped with a slewing jib crane: a yellow mast on the deck, an 7.4 m boom over the pad and a hook block on a static fall. Same 6 m module and the same base and top ports as the plain section.
Gantry Tower Section (Rocket Launch Pad and Gantry)
One stackable 6 m section of service gantry: a 5.2 m square lattice bay with a grated deck, handrails on three sides and a stair flight up the back. Base and top ports on the tower axis, so a structure of any height is repeats of this piece.
AnimatedGantry Base Section (Rocket Launch Pad and Gantry)
The bottom 6 m of the service gantry: a 5.2 m lattice bay on four concrete footings, a grated deck and handrails at the top, an access stair off the back and a plant room at the foot with a door that opens.
Pad Water Tower (Rocket Launch Pad and Gantry)
A 22 m water tower feeding the deluge system: a lattice frame on four pads carrying an 8.4 m tank with a domed base and top, a railed catwalk, a ladder the full height and a downpipe out to the mains.
Safety Shower and Eyewash (Rocket Launch Pad and Gantry)
An emergency safety shower and eyewash station on a concrete plinth: a 2.6 m yellow standpipe with an overhead rose and pull rod, a bowl and paddle on the stem and a blank instruction plate on the back.
Cable Tray Run (Rocket Launch Pad and Gantry)
An 8 m elevated cable tray on two stanchions, 1.5 m to the deck, carrying three bundles in a ladder tray with side rails. Ported at both ends at tray height so a tray route crosses a pad without blocking it.
Blast Fence Panel (Rocket Launch Pad and Gantry)
A 4.4 m blast fence panel, 3.7 m tall: a braced steel frame on two ballast pads carrying a deflection plate with vertical stiffeners and a yellow cap rail. Ported left and right so a blast wall runs as far as the pad needs.