Free models · Game-ready GLB
Modular
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,072 free GLB models
Flare boom tip (Offshore Oil Rig and Platform)
The burner end of a flare boom: a short truss stub carrying the weathered flare tip, its wind shield and three pilot burners on their risers, with the ignition box slung underneath.
Flare boom section (Offshore Oil Rig and Platform)
One bay of an inclined flare boom: a square tubular lattice climbing 6 m over a 10 m run, carrying the flare header, the pilot gas line and a grated access walkway along its length. Couple the bays nose to tail for a boom of any reach.
Derrick section, 8 m (Offshore Oil Rig and Platform)
An 8 m stackable section of a square lattice drilling derrick: four chords with horizontal ties and crossed diagonals on all four faces, a climbing ladder, a racking board with finger latches and painted bands.
Sea surface module, 20 m (Offshore Oil Rig and Platform)
A 20 m square of open sea with a low crossing swell, for placing a platform, a jacket or a vessel in water. Tile the modules on the 20 m grid to make as much sea as a scene needs.
Deck stair flight, 2.4 m rise (Offshore Oil Rig and Platform)
A twelve tread stair flight climbing 2.4 m over a 3 m run, with channel stringers, grated treads, a handrail and a knee rail each side and a landing plate at the foot.
Deck handrail run, 6 m (Offshore Oil Rig and Platform)
A 6 m offshore handrail run on three stanchions: a tubular top rail, a flat knee rail and a kicking plate, with bolted base plates at both ends. Repeat it round a deck edge or a walkway.
Deck walkway section, 6 m (Offshore Oil Rig and Platform)
A 6 m raised walkway bay: grated tread plate on six trestle legs with a full handrail, knee rail and kicking plate on both sides. Couple the bays end to end to route a walkway across a deck.
Cellar deck section, 6 m (Offshore Oil Rig and Platform)
A 6 m bay of cellar deck: 1.2 m plate girders with diagonal bracing carrying grating around an open wellbay slot, a painted slot surround and a handrail run along one edge. Its top ports sit at main deck level, so a run of these drops straight into a deck grid as the wellbay.
Deck module, chequer plate 6 m (Offshore Oil Rig and Platform)
The same 6 m deck module with a sealed chequer plate surface instead of open grating, for a laydown area, a module footprint or anywhere a dropped object must not fall through.
Deck module, open grating 6 m (Offshore Oil Rig and Platform)
A 6 m square of main deck: three primary beams and two edge girders under an open grating walking surface with its bearing bars standing proud. Tile the modules on the 6 m grid and a deck of any size falls out.
Jacket bracing panel, 18 m (Offshore Oil Rig and Platform)
The 18 m X brace that ties two jacket legs into a frame: two tubular diagonals crossing a horizontal member, gusseted connection plates at both ends and a painted collar at the crossing node.
Jacket leg section, 6 m (Offshore Oil Rig and Platform)
A 6 m flanged tubular leg of a fixed steel jacket, with the darkened splash zone band, four sacrificial anodes and a hazard ring at each brace level. Stack the sections to reach any water depth and tie them with bracing panels.
AnimatedDoorway Frame (Sunken City and Underwater Ruins)
Four metre wall bay with a 1.72 by 2.3 m doorway, a carved lintel band and one timber and bronze leaf that swings on its jamb.
Wall Run Collapsed (Sunken City and Underwater Ruins)
Four metre wall run brought down to two courses with a 2.4 m stub at one end and its fallen blocks spread on the seabed either side.
Temple Platform Module (Sunken City and Underwater Ruins)
Four metre temple platform module in two coursed courses with a slab deck at Y 1.16 m, matching the stepped terrace so a raised precinct can be any size.
Stone Step Module (Sunken City and Underwater Ruins)
Four metre stepped terrace module: three 0.3 m steps climbing one bay to a landing at Y 1.16 m, on the shared silt bed.
Wall Run Intact (Sunken City and Underwater Ruins)
Four metre coursed wall run 2.44 m tall and 0.62 m thick with a weathered capping course, for the precincts of the city.
Sand Drift Module (Sunken City and Underwater Ruins)
Four metre seabed module with a long diagonal sand drift about 0.3 m proud of the bed, for burying the foot of a wall or a wreck.
Cracked Paving Module (Sunken City and Underwater Ruins)
Four metre paving module of sixteen worn slabs on a 1 m pitch, two lifted out and two tipped, with silt and weed in the open joints.
Mosaic Floor Plate (Sunken City and Underwater Ruins)
Four metre mosaic module: a 3.3 m field of tesserae in concentric abstract bands with tiles missing, laid over the shared silt bed.
Silted Floor Module (Sunken City and Underwater Ruins)
Four metre silted seabed module with soft drifts and scattered pebbles, bed surface at Y 0.18 m.
Cable Tray Run (Nuclear Power Station and Control Room)
A 4 m bay of ladder cable tray on two stanchions at 2.8 m: pressed side rails with rungs on 300 mm centres and three cable bundles lying in it. End ports run it across a plant floor.
Cable Tray Corner (Nuclear Power Station and Control Room)
The cable tray turned through a right angle on two stanchions, for taking a run round a corner of the plant floor.
Bus Duct Riser (Nuclear Power Station and Control Room)
The bus duct bay with a riser dropping off one end to a cubicle top, with its link box and floor flange, for taking a run down to switchgear.